The button on your rear view mirror dims the glass to reduce glare from headlights behind you
That small button or lever on the back of your rear view mirror is an anti-glare dimmer. When you flip it, the mirror's reflective coating changes from bright to dark, cutting down the harsh light from headlights behind you at night. It does not turn off the mirror or change what you see—it just makes the reflection less intense so oncoming light does not wash out your vision or cause eye strain during night driving.
The mechanism works through one of two systems. Older cars use a mechanical lever that physically tilts a secondary mirror surface in front of the main reflective glass, angling the light away from your eyes. Newer vehicles use electrochromic glass, which is a special coating that darkens electronically when you press the button, similar to how some sunglasses darken in sunlight. Both methods serve the same purpose: protecting your night vision from glare.
Key Takeaways
- The rear view mirror button dims the reflection of headlights behind you to reduce eye strain and improve night visibility.
- Mechanical dimming uses a tilting mirror surface, while electrochromic systems darken the glass electronically.
- The button does not affect your ability to see behind you—it only reduces the brightness of what you see.
- Electrochromic mirrors may have a slight delay when switching between bright and dim, which is normal.
How mechanical dimming mirrors work
In a mechanical system, the button or lever on the back of the mirror is connected to a small rod or pivot mechanism. When you move it, the rod tilts a secondary reflective surface—usually a thin mirror layer—in front of the main mirror glass. This angled surface bounces the incoming light away from your eyes instead of directly into them, darkening what you see in the reflection.
The advantage of mechanical dimming is simplicity: there are no electronics to fail, and the dimming happens when ready. The disadvantage is that the secondary mirror is not perfect at blocking light, so the reduction in glare is partial rather than complete. You will still see the road behind you clearly, but the harsh brightness from headlights is softened.
How electrochromic mirrors work
Electrochromic rear view mirrors contain a special coating sandwiched between layers of glass. When you press the button, an electrical current passes through the coating, causing it to darken chemically. The darker the current, the darker the glass becomes. When you release the button or press it again, the current stops and the glass gradually returns to its normal brightness.
Electrochromic systems offer smoother, more complete glare reduction than mechanical mirrors because the entire mirror surface darkens evenly. However, they require power from your car's electrical system and have a slight delay—usually less than a second—when switching between bright and dim. If your electrochromic mirror seems slow to respond or does not darken fully, the electrical connection may be loose or the coating may be failing, and you should have it inspected.
When and why you should use the dimmer
Use the dimmer whenever headlights behind you are bright enough to cause discomfort or reduce your ability to see the road ahead. This happens most often at night on highways when a car with high beams is tailgating, or when you are driving toward oncoming traffic on a two-lane road and their headlights reflect in your mirror. The glare can cause temporary vision loss and eye fatigue, making it harder to react to hazards.
Some drivers also use the dimmer during dawn or dusk when the sun is low and reflects off wet roads or the rear windows of cars ahead. The goal is to keep your eyes comfortable and your vision sharp—a dimmed mirror that lets you see clearly is always better than a bright mirror that forces you to squint or look away.
Common problems with rear view mirror dimmers
If your mechanical dimmer is stuck or does not move smoothly, the pivot rod may be bent or the connection may be loose. Try moving the lever gently back and forth; if it does not budge, do not force it. Corrosion or debris inside the mechanism can jam it, and forcing it may break the rod. A mechanic can disassemble and clean the mirror or replace it if the damage is permanent.
Electrochromic mirrors that do not darken may have a dead battery connection, a blown fuse, or a failed coating. Check your vehicle's fuse box for any blown fuses related to the mirror circuit—the owner's manual will show you which one. If the fuse is good but the mirror still does not work, the electrical connection at the mirror itself may be corroded or loose. If the mirror darkens unevenly or stays dark permanently, the coating has likely failed and the mirror will need to be replaced.
Maintenance and care
Keep your rear view mirror clean by wiping it gently with a soft, dry cloth. Do not use harsh chemicals or abrasive materials, especially on electrochromic mirrors, as these can damage the special coating. If you need to clean it thoroughly, use a glass cleaner designed for car windows and a microfiber cloth.
Avoid bumping or jarring the mirror, as this can loosen the electrical connections in electrochromic systems or bend the pivot rod in mechanical ones. If your mirror is damaged in a collision, have it inspected even if it still seems to work—internal damage may cause it to fail later. Most rear view mirrors can be replaced as a complete unit without major disassembly, and replacement is usually faster and cheaper than repair.
Frequently Asked Questions
Does the dimmer button affect how well I can see behind me?
No. The dimmer reduces brightness but does not block your view. You will still see vehicles, road signs, and lane markings behind you clearly—the light is just less harsh. If you cannot see clearly when the mirror is dimmed, the dimmer may be malfunctioning or set too dark.
Why does my electrochromic mirror take a moment to darken?
The chemical reaction in the coating takes a fraction of a second to complete. A delay of less than one second is normal. If the delay is longer or the mirror does not darken at all, the electrical circuit may be faulty.
Can I replace just the mirror glass, or do I have to replace the whole mirror?
Most modern rear view mirrors are sold as complete units, and replacing just the glass is not practical. The dimming mechanism—whether mechanical or electronic—is built into the assembly. Replacement mirrors are usually affordable and can be installed in under an hour.
What should I do if the dimmer lever breaks off?
If the lever snaps off a mechanical mirror, the mirror itself is still functional but you cannot adjust the dimming. You can continue to drive safely, but you may want to replace the mirror to restore the feature. Do not try to glue the lever back on, as it will not hold under repeated use.
Is the dimmer required by law?
No. The anti-glare dimmer is a safety feature, not a legal requirement. However, most vehicles sold in the United States have included one as standard equipment for decades because it genuinely reduces eye strain and improves night driving safety.