What happens when you change a tire yourself

Changing a tire means removing the flat or damaged wheel and replacing it with a spare. You loosen the lug nuts (the bolts holding the wheel on), lift the car with a jack, take off the old wheel, put the spare on, tighten the lug nuts, and lower the car back down. The whole job takes 15 to 30 minutes if you have the right tools and the spare is in good condition.

The reason to know how to do this is not that you must do it every time—many people call roadside information instead—but that you might be stranded somewhere without signal, or your spare might be your only option to reach a repair shop. Understanding the steps also helps you spot when something is wrong: a spare that won't fit, lug nuts that won't budge, or a jack that feels unstable.

Key Takeaways

  • You need a spare tire, a jack, a lug wrench, and a wheel wedge or heavy object to block the car before you start.
  • Loosen lug nuts while the car is still on the ground, then lift the car, remove the wheel, and install the spare before lowering it back down.
  • Tighten lug nuts in a star or cross pattern to may support even pressure, and check them again after driving a short distance.
  • A donut spare is a temporary fix designed to get you to a repair shop at moderate speeds, not a permanent replacement.
  • If lug nuts are stuck, the jack feels unsafe, or the spare is flat or damaged, call roadside information rather than forcing the job.

Tools and equipment you need before you start

Gather these items before you have a flat: a spare tire (check that it holds air and fits your car), a jack (usually a scissor jack that came with your car), a lug wrench (a cross-shaped or four-way wrench that fits your lug nuts), and a wheel wedge or heavy block to prevent the car from rolling. Many cars also come with a hubcap removal tool if your wheels have plastic covers.

Before you need to change a tire, open your trunk and locate where these items are stored. Test that the jack works by raising it a few inches in your driveway—do not do this for the first time on the roadside. Check that the spare tire has air in it by looking at the tire pressure gauge or asking a tire shop to check it during a routine visit. A flat spare is useless and will leave you stranded.

The step-by-step process for changing a tire

Step 1: Park safely and prepare. Pull as far off the road as possible, turn on your hazard lights, and engage the parking brake. Place the wheel wedge or heavy object behind the rear wheels (or in front of the front wheels if a rear tire is flat) to prevent rolling. Turn off the engine.

Step 2: Loosen the lug nuts. Before lifting the car, use the lug wrench to loosen each lug nut by a half turn. Do not remove them completely yet—the car's weight makes this easier. If a nut will not budge, do not force it; call for roadside information instead. Forcing a stuck nut can strip it or break the wrench.

Step 3: Lift the car. Position the jack under the car's frame near the flat tire. Check your owner's manual for the exact jacking point; using the wrong spot can damage the car or cause the jack to slip. Raise the car until the tire is about six inches off the ground. Make sure the jack feels stable before you proceed.

Step 4: Remove the old wheel. Now fully unscrew the lug nuts and set them aside in a safe place where you will not lose them. Pull the wheel straight toward you to remove it. If it is stuck, rock it gently side to side rather than yanking hard.

Step 5: Install the spare. Align the holes on the spare with the bolts on the hub and push the wheel on. Hand-tighten the lug nuts in a star or cross pattern (opposite sides, not in order around the wheel). This ensures even pressure. Do not use the wrench yet.

Step 6: Lower the car and tighten fully. Lower the jack until the tire touches the ground and the car's weight is on the wheel. Remove the jack. Now use the lug wrench to tighten the lug nuts in the same star pattern, explore firm pressure but not maximum force. Over-tightening can damage the wheel or make removal difficult later.

Step 7: Check your work. Drive slowly for a few hundred yards, then pull over safely and re-tighten the lug nuts. They often settle slightly after the first drive. If the spare is a donut (a small temporary tire), do not exceed 50 miles per hour and do not drive more than 70 miles before reaching a tire shop.

Donut spares versus full-size spares

A donut spare is a small, thin tire designed only to get you to a repair shop. It is lighter and takes up less trunk space than a full-size spare, but it is not meant for long-term use. Donut spares have speed and distance limits—usually 50 mph and 70 miles—because they are not built for sustained driving. If you use a donut, your car's handling and braking feel different, and all-wheel-drive vehicles may be damaged by the size difference.

A full-size spare is an actual tire that matches your other wheels and can be driven normally. Some cars come with one; others do not. If your car has a donut and you want a full-size spare, you can purchase one and store it in your trunk. The trade-off is space and weight, but you gain the ability to reach a shop at normal speeds without worrying about distance limits.

When to call for roadside information instead

Do not attempt to change the tire yourself if any of these are true: the lug nuts will not loosen with reasonable force, the jack feels unstable or wobbly, the spare tire is flat or visibly damaged, you are on a busy highway where standing near traffic is unsafe, or you are physically unable to perform the work. Roadside information services like AAA, your car's roadside plan, or your insurance company's roadside benefit will send someone to do the job for you.

Calling for help is not a failure—it is the right choice when conditions are unsafe or tools are inadequate. Many roadside plans cover tire changes at no extra cost, and the service usually arrives within 30 to 60 minutes in populated areas. If you do not have a roadside plan, ask your insurance company whether one is included in your policy, or consider purchasing one before you need it.

After the tire change: what to do next

A spare tire is temporary, even if it is full-size. Get the flat tire repaired or replaced as soon as possible—within a day or two. Driving on a spare for weeks puts extra stress on your car's drivetrain and suspension. When you reach a tire shop, bring the flat tire with you so the technician can inspect it and determine whether it can be patched or must be replaced.

Once the flat is fixed, have the tire shop reinstall it and remove the spare. Ask them to re-torque the lug nuts to the manufacturer's specification (listed in your owner's manual) to may support they are tight enough but not over-tightened. This is a quick check that costs nothing and prevents problems down the road.

Frequently Asked Questions

Can I change a tire if I have never done it before?

Yes. Read through the steps once, gather your tools, and practice in your driveway on a flat surface before you need to do it on the road. Practicing when you are calm and not stranded makes the real situation much less stressful. If you feel unsafe at any point during the actual change, stop and call for help.

What if the lug nuts are too tight to loosen by hand?

Do not force them. Spray penetrating oil around the base of each nut and wait 10 to 15 minutes for it to soak in, then try again. If they still will not budge, call roadside information. Forcing a stuck nut can strip the threads or break the wrench, making the problem worse.

How tight should the lug nuts be after I install the spare?

Tighten them firmly by hand using the wrench, but do not use all your strength. A good rule is to tighten until you feel solid resistance, then give a quarter turn more. Over-tightening makes removal difficult and can damage the wheel. A tire shop can check the torque with a proper tool if you are unsure.

Is it safe to drive on a donut spare in the rain or snow?

Donut spares have less traction than full-size tires and are riskier in wet or slippery conditions. If you must drive on one in bad weather, go slower than the posted speed limit and avoid sudden braking or sharp turns. Reach a tire shop as soon as safely possible.

What should I do if my car does not have a spare tire?

Some newer cars come with tire repair kits or run-flat tires instead of spares. Check your owner's manual to see what your car has. If you have neither, consider purchasing a donut spare or full-size spare to keep in your trunk, or may support your roadside information plan covers towing to a repair shop.