What you need to change a tire yourself
A tire change requires four things: a spare tire (full-size, compact, or temporary donut), a jack to lift the vehicle, a lug wrench to remove the wheel bolts, and a wheel wedge or heavy object to block the wheels. Most vehicles come with at least a compact spare, a scissor jack, and a lug wrench in the trunk or under the rear seat. Check your owner's manual to confirm what came with your car and where it is stored.
You will also benefit from a flashlight or headlamp if you are changing a tire in low light, and work gloves to protect your hands from dirt and sharp edges. A tire pressure gauge is useful afterward to check that your spare is properly inflated — many compact spares lose pressure over time and may be underinflated when you need them. Some people keep a breaker bar (a longer wrench) in the car because lug nuts are often tight enough that a standard lug wrench requires significant force.
Key Takeaways
- You need a spare tire, jack, lug wrench, and wheel wedge; most vehicles include these, but check your owner's manual for their location.
- Loosen lug nuts while the wheel is still on the ground, then lift the vehicle, remove the wheel, and install the spare before lowering the car.
- Compact spares and temporary donuts have speed and distance limits — check the sidewall and your manual for the correct restrictions.
- After a tire change, have the flat tire repaired or replaced within a few days and check that your spare is properly inflated for next time.
- If the lug nuts are stuck, the jack fails, or you are in an unsafe location, call roadside information rather than risk injury.
The step-by-step process for changing a tire
First, move to a safe, flat location away from traffic if possible. Turn on your hazard lights. Locate the spare tire, jack, and lug wrench in your vehicle. Place the wheel wedge (or a heavy rock or block of wood) behind the wheels that will remain on the ground — this prevents the car from rolling while you work.
Loosen the lug nuts by a quarter turn while the wheel is still on the ground. This is the hardest step because the nuts are tight; do not remove them completely yet. Position the jack under the vehicle's frame near the flat tire — your owner's manual shows the correct jacking point, usually a reinforced area near the wheel well. Raise the vehicle until the flat tire is about six inches off the ground.
Now remove the lug nuts completely and set them in a clean spot where you will not lose them. Pull the flat tire straight toward you to remove it. Mount the spare tire onto the lug bolts and push it in until it seats against the hub. Hand-tighten the lug nuts, then use the lug wrench to tighten them in a star or cross pattern (opposite sides alternately) to may support even pressure. Lower the vehicle completely, then tighten the lug nuts again in the same star pattern using firm pressure.
Differences between full-size, compact, and temporary spares
A full-size spare is identical to your regular tires and can be driven at normal speeds indefinitely. Many newer vehicles no longer include one because they add weight and take up trunk space. If your car has a full-size spare, you can treat it like any other tire and drive normally until you repair or replace the flat.
A compact spare (sometimes called a "space-saver") is smaller and lighter than a regular tire. It is designed to get you to a repair shop, not to be a permanent replacement. The sidewall will state a maximum speed — often 50 mph — and a maximum distance, typically 50 to 70 miles. Driving faster or farther can damage the spare or cause it to fail. Check your owner's manual for your vehicle's specific limits.
A temporary donut spare is the smallest option and has the most restrictive limits. Maximum speeds are often 50 mph or lower, and distances are usually 50 miles or less. These are meant only to get you safely to the nearest tire shop. Do not take a temporary spare on a highway or long drive; call a tow truck instead if the repair shop is far away.
When to call for roadside help instead
If the lug nuts will not budge after reasonable effort, do not force them — you risk stripping the bolt or injuring yourself. If the jack fails or feels unstable, stop when ready and call for help. If you are on a busy highway or in an unsafe area, stay in the vehicle with hazard lights on and call roadside information rather than working roadside.
If your spare tire is flat or damaged, you cannot change the tire yourself. Call a tow truck to transport your vehicle to a repair shop. Similarly, if the wheel itself is bent or cracked, a spare tire will not solve the problem — you need professional service. Most auto insurance policies and roadside information memberships (AAA, roadside plans from your car manufacturer) cover towing at no cost or low cost.
What to do after the tire change
After you have installed the spare and lowered the vehicle, drive carefully to a tire repair shop within the distance and speed limits of your spare. Have the flat tire inspected — small punctures in the tread can often be repaired for $15 to $30, while sidewall damage or large punctures usually require replacement. A new tire typically costs $100 to $300 depending on the vehicle and tire quality.
Before you leave the shop, ask them to check the pressure in your spare tire and top it up if needed. Compact and temporary spares lose air over time and may be underinflated when you need them next. Check the pressure yourself every few months using a tire pressure gauge, which costs $10 to $20 and is a worthwhile tool to keep in your car.
Tools and supplies worth keeping in your vehicle
Beyond the jack and lug wrench that came with your car, a few inexpensive items make tire changes easier and safer. A breaker bar (a longer wrench, 18 to 24 inches) gives you more leverage on stuck lug nuts and costs $10 to $25. A tire pressure gauge ($10 to $20) lets you check your spare before you need it. Work gloves ($5 to $15) protect your hands from dirt and sharp edges.
A flashlight or headlamp ($15 to $40) is essential if you change a tire after dark. A wheel wedge or heavy rubber block ($15 to $30) is safer than improvising with rocks or wood. Some people also carry a tire plug kit ($10 to $20) for temporary repairs, though this is a short-term fix and you should still visit a shop within a few days. None of these items are required, but they reduce frustration and risk.
Frequently Asked Questions
How tight should the lug nuts be after I install the spare?
Tighten them firmly by hand using the lug wrench, but do not use all your strength — you should be able to loosen them again with reasonable effort. Over-tightening can strip the bolts or make them impossible to remove next time. If you have a torque wrench, your owner's manual lists the correct torque specification, usually between 80 and 120 foot-pounds depending on the vehicle.
Can I drive on a compact spare to work or run errands, or only to a tire shop?
You should drive only to a tire shop to have the flat repaired or replaced. Compact spares are temporary solutions with strict speed and distance limits for safety reasons. Driving beyond those limits risks tire failure, loss of control, or damage to your vehicle's drivetrain.
What if I do not have a spare tire in my car?
Some newer vehicles come with tire repair kits or sealant cans instead of spares. These allow temporary repairs that last long enough to reach a shop. If your car has neither a spare nor a repair kit, call roadside information or a tow truck — you cannot safely drive on a flat tire.
Do I need to have the flat tire balanced and aligned after it is repaired?
Tire repair shops will balance the tire as part of the repair process. You do not need a separate alignment unless you hit a pothole or curb hard enough to damage the suspension — in that case, a technician will tell you during the tire inspection.
How often should I check my spare tire pressure?
Check it every few months, or before a long road trip. Compact and temporary spares lose air naturally over time and may be underinflated when you need them. A properly inflated spare takes only a few minutes to verify and can prevent a second breakdown.