You can replace a flat tire yourself if you have a spare, a jack, and a lug wrench — the job takes 15 to 30 minutes and requires no special skills
A flat tire is fixable on the roadside if the damage is a puncture you can patch, or if you have a usable spare tire. If the sidewall is torn, the tire is too old, or you do not have a spare, you will need a tow or roadside service. The fastest path depends on what caused the flat and what equipment you have with you.
Most cars come with either a full-size spare (identical to your other tires) or a temporary spare (smaller, marked for speeds under 55 mph and distances under 70 miles). Some newer vehicles have no spare at all and rely on run-flat tires or a tire repair kit. Check your owner's manual or the inside of your trunk lid to see what you have.
Key Takeaways
- A puncture in the tread can sometimes be patched and driven on; sidewall damage means the tire cannot be repaired and must be replaced.
- If you have a spare and a jack, you can change the tire yourself in 15 to 30 minutes using the lug wrench from your trunk.
- Loosen lug nuts before you jack the car up, then tighten them again after the wheel is back on the ground.
- A temporary spare is safe only up to 55 mph and 70 miles — drive straight to a tire shop to have it replaced with a full-size tire.
- If you have no spare, a torn sidewall, or you are on a highway, call roadside information or a tow service rather than attempting the change yourself.
What to check before you start changing the tire
Pull over to a flat, stable surface away from traffic if you can. Turn on your hazard lights. Inspect the tire to see whether it is punctured (a nail or screw visible in the tread) or damaged (a bulge, crack, or tear in the sidewall). A puncture in the tread may be repairable; sidewall damage is not, and the tire must be replaced.
Open your trunk and locate your spare tire, jack, and lug wrench. If you do not have all three, or if your spare is flat or visibly damaged, do not attempt the change — call a tow service or roadside information instead. If you are on a highway or in heavy traffic, it is safer to call for help even if you have the equipment.
The step-by-step process for changing a tire
Step 1: Loosen the lug nuts. Before you jack the car up, use the lug wrench to loosen (but do not remove) each lug nut by a quarter turn. The car's weight makes this easier than trying to loosen them after the wheel is in the air. Turn counterclockwise.
Step 2: Position the jack. Consult your owner's manual for the exact jacking point on your vehicle — it is usually a reinforced spot on the frame near the flat tire. Place the jack there and raise the car until the tire is about six inches off the ground.
Step 3: Remove the lug nuts and wheel. Now fully unscrew the lug nuts and set them aside in a cup or container so you do not lose them. Grip the wheel with both hands and pull it straight toward you to remove it. Set it flat on the ground nearby.
Step 4: Install the spare. Lift the spare tire and align the holes with the wheel bolts. Push it straight onto the bolts until it seats fully. Hand-tighten the lug nuts in a star or cross pattern (not in a circle) — this keeps the wheel centered. Do not use the wrench yet.
Step 5: Lower the car and tighten the lug nuts. Lower the jack until the car is fully on the ground and the jack is no longer supporting weight. Use the lug wrench to tighten the lug nuts in the same star pattern, turning clockwise. Tighten firmly but do not over-tighten, which can strip the bolts.
Step 6: Stow the flat tire and tools. Place the flat tire, jack, and lug wrench back in your trunk. If you installed a temporary spare, drive directly to a tire shop — do not exceed 55 mph or travel more than 70 miles.
When to call for roadside help instead
Do not attempt to change the tire yourself if you are on a highway, in heavy traffic, or in unsafe weather. Do not change it if the sidewall is torn, the spare is flat or damaged, or you do not have a jack and lug wrench. Call roadside information, your insurance company's roadside service, or a tow truck.
If you are a member of AAA, your membership includes roadside service — call the number on your card. If your car insurance includes roadside information, call that number. If not, search for a local towing company or use a service like Uber Eats' roadside information feature (available in some areas) or GasBuddy's roadside help.
Patching a puncture versus replacing the tire
A small puncture in the tread (the part that touches the road) can sometimes be patched or plugged at a tire shop for $10 to $25. The tire must be removed from the wheel, the hole cleaned and sealed, and the tire remounted. This is a temporary repair and is not safe for highway driving in some states — check your local traffic laws.
Sidewall punctures, bulges, cracks, or tears cannot be repaired and require a new tire. Tires also cannot be repaired if the puncture is larger than a quarter-inch, if there are multiple punctures, or if the tire is already worn below 2/32 of an inch of tread depth. A tire shop can assess the damage and tell you whether repair is an option.
How to avoid flats and extend tire life
Check your tire pressure once a month using a tire gauge — the correct pressure is printed on a sticker inside your driver's door jamb, not on the tire itself. Underinflated tires wear faster and are more prone to punctures. Rotate your tires every 5,000 to 7,000 miles to even out wear.
Inspect your tires visually for cracks, bulges, or objects embedded in the tread. Avoid potholes and debris when possible. Replace tires when the tread depth reaches 2/32 of an inch — you can test this with a penny: insert it into the tread with Lincoln's head upside down; if you can see the top of his head, the tread is too shallow.
What to do after you have replaced the tire
If you installed a temporary spare, drive directly to a tire shop to have it replaced with a full-size tire. Do not exceed 55 mph or travel more than 70 miles on a temporary spare. If you installed a full-size spare, you can drive normally, but have the flat tire repaired or replaced as soon as possible so you have a spare again.
After any tire change, have the lug nuts rechecked at a tire shop within a few miles of the change. Lug nuts can loosen slightly as the tire settles, and a shop can verify they are tight enough. This is a quick check and usually costs nothing.
Frequently Asked Questions
Can I drive on a temporary spare tire for long distances?
No. Temporary spares are designed for speeds under 55 mph and distances under 70 miles. Driving faster or farther risks damage to the spare and loss of control. Drive straight to a tire shop to have it replaced with a full-size tire.
What if I do not have a spare tire in my car?
Some newer vehicles come with a tire repair kit (a sealant canister and compressor) instead of a spare. Follow the kit's instructions to seal the puncture, then drive to a tire shop. If you have neither a spare nor a kit, call roadside information or a tow service.
How tight should I make the lug nuts?
Tighten them firmly in a star pattern until they are snug, but do not use all your strength — over-tightening can strip the bolts and make them impossible to remove later. If you have a torque wrench, your owner's manual lists the correct torque specification. A tire shop can verify the tightness after you drive there.
Is it safe to change a tire on the shoulder of a highway?
It is risky. Passing traffic can be unpredictable, and you are focused on the tire rather than your surroundings. If you must change it, turn on hazard lights, stay alert, and consider calling roadside information instead — the cost is usually worth the safety gain.
Can a tire with a nail in it be driven on temporarily?
A tire with a nail or screw in the tread may hold air for a while, but the puncture will usually worsen as you drive. Do not rely on it to reach a tire shop — change to your spare or call for help. Driving on a leaking tire can damage the wheel rim and make the repair more expensive.