Where to find your tire size right now

Your tire size is printed on the sidewall of every tire on your vehicle. Look at the outer edge of any tire and you'll see a series of numbers and letters — something like 225/65R17 or P195/60R15. That entire code is your tire size. You don't need to remove the tire or use any tools; you can read it while the tire is on the car.

If you can't get close enough to read the sidewall clearly, or if you want a backup source, open your driver's side door and look at the door jamb (the vertical edge where the door closes). A white or yellow sticker there lists your vehicle's tire size, along with the correct air pressure and load capacity. This sticker is called the tire placard.

A third option is your vehicle's owner's manual, which lists the original tire size in the specifications section. If you've already replaced your tires with a different size, the manual will show what came from the factory, but the sidewall or door jamb will show what's actually on your car now.

Key Takeaways

  • Your tire size is printed on the sidewall of each tire and reads as a code like 225/65R17 — you can see it without removing the tire.
  • The tire placard on your driver's side door jamb shows the factory tire size and correct air pressure for your vehicle.
  • Each number and letter in the tire code means something specific: width, aspect ratio, construction type, and wheel diameter.
  • If you've replaced your tires with a different size, the sidewall shows what's on your car now, while the door jamb shows what the manufacturer originally specified.

What each part of the tire size code means

A tire size like 225/65R17 breaks down into four pieces of information. The first number (225) is the tire width in millimeters — how wide the tire is from sidewall to sidewall. The second number (65) is the aspect ratio, which is the height of the sidewall as a percentage of the width. So a 65 aspect ratio means the sidewall height is 65% of 225 millimeters.

The letter (R) tells you the tire's internal construction type. R stands for radial, which is the standard for nearly all passenger car tires made in the last 40 years. You may occasionally see D (diagonal) on older vehicles, but radial is what you'll find on modern cars.

The final number (17) is the wheel diameter in inches — the size of the metal wheel the tire fits onto. This is the measurement from one edge of the wheel to the other through the center. If you buy a replacement tire, it must match this number exactly, or the tire won't fit your wheel.

Why you need the correct tire size

Using the wrong tire size can affect how your vehicle handles, how accurate your speedometer reads, and how hard your engine and transmission work. A tire that's too small or too large changes the overall diameter of the wheel-and-tire assembly, which throws off your vehicle's calibration.

Your door jamb placard lists not just one tire size, but sometimes multiple approved sizes. These are all sizes the manufacturer has tested and approved for your specific vehicle. You can choose any of them, but you should not go outside that list. If you're unsure whether a tire size is approved for your car, ask the tire shop or check your owner's manual.

Mixing tire sizes on the same vehicle — for example, putting different sizes on the front and rear axles — can damage your transmission and all-wheel-drive system. All four tires should be the same size unless your vehicle's manual specifically allows otherwise.

How to read the tire placard on your door jamb

The tire placard is a small sticker mounted on the inside edge of your driver's side door, where the door closes against the frame. Open the door fully and look at the vertical surface — you'll see a white or yellow label with black text. This label shows the tire size the manufacturer originally installed, the correct tire pressure for your vehicle, and the maximum load each tire can carry.

The tire pressure listed on the placard is the cold pressure — the pressure when the tires have not been driven on recently and are at the same temperature as the air around them. This is the pressure you should set your tires to when you check them in the morning or after the car has sat for at least three hours. Do not use the maximum pressure printed on the tire sidewall itself; that's the absolute limit the tire can handle, not the pressure your vehicle needs.

If your vehicle has different tire sizes for summer and winter driving, the placard may list both. Some vehicles also have different pressures for front and rear tires, which the placard will show separately.

Finding tire size if the sidewall is worn or damaged

If the sidewall is too worn or damaged to read clearly, the tire placard on your door jamb is your most reliable source. That sticker doesn't wear out and will always show the factory tire size for your vehicle. You can also call a tire shop with your vehicle's year, make, and model, and they can tell you what size tires your car came with.

If you've already replaced your tires and need to know what size is currently on your car, but the sidewall is illegible, a tire technician can measure the tire or remove it to read the sidewall from the inside. This is usually a quick job and many shops will do it for free or a small fee.

Tire size versus wheel size — what's the difference

Tire size and wheel size are not the same thing. The tire size includes the wheel diameter as its last number (the 17 in 225/65R17), but the tire is the rubber part that goes around the wheel. The wheel is the metal part underneath. When someone asks for your wheel size, they're asking only for that last number — in this case, 17 inches.

If you're shopping for new wheels, you need to know both the wheel diameter and the wheel width (measured in inches). The tire size code doesn't tell you the wheel width. You can find wheel width on the wheel itself, stamped into the metal, or you can look it up in your owner's manual or ask a tire shop.

What to do once you know your tire size

Once you have your tire size, you can shop for replacement tires online or at a tire shop. You can also use your tire size to check your current tire pressure, because different sizes may have different recommended pressures (though most passenger vehicles use the same pressure front and rear). Write down your tire size and keep it somewhere accessible — many people take a photo of the door jamb placard and save it on their phone.

If you're planning to change your tire size — for example, to fit larger wheels — check your owner's manual or ask a tire professional which sizes are approved for your vehicle. Going outside the manufacturer's approved sizes can affect your warranty and may cause mechanical problems.

Frequently Asked Questions

Can I use a different tire size than what's on the door jamb?

Only if the manufacturer lists it as an approved alternative on the door jamb placard itself. Some vehicles have multiple approved sizes. Never use a size that's not on that list, because it can affect your speedometer accuracy, fuel economy, and transmission wear.

What does the "P" at the beginning of some tire sizes mean?

The P stands for passenger vehicle. Some tire codes start with P (P225/65R17) and some don't (225/65R17). Both mean the same thing for a standard car or SUV. You may also see LT (light truck) on truck tires, which are built differently and rated for heavier loads.

If I buy new wheels, do I need a different tire size?

Not necessarily. You can buy new wheels in the same diameter as your current ones and use the same tire size. However, if you buy larger wheels, you'll need a tire size that fits that wheel diameter. A tire shop can help you find approved sizes for your new wheel diameter.

Why is the tire pressure on the sidewall different from the pressure on the door jamb?

The sidewall shows the maximum pressure the tire can safely hold. The door jamb shows the correct pressure for your vehicle's weight and handling. Always use the door jamb pressure, not the sidewall maximum.

Where else can I find my tire size if I can't read the sidewall or door jamb?

Your owner's manual lists the factory tire size in the specifications section. A tire shop can also look up your tire size using your vehicle's year, make, and model. Some dealerships can provide this information over the phone.