Change a spare tire in about 15 to 30 minutes with basic tools

You can change a spare tire yourself if you have a jack, a lug wrench, and a spare tire that holds air. The process takes 15 to 30 minutes depending on how tight the lug nuts are and whether you've done it before. You do not need special training or expensive equipment — just the tools that usually come with your vehicle.

The hardest part is often breaking the lug nuts loose, which can require real force if they were installed with power tools at a shop. Once you know the sequence and have done it once, the second time is noticeably easier.

Key Takeaways

  • Loosen the lug nuts while the tire is still on the ground, then jack up the vehicle, remove the wheel, and install the spare.
  • A spare tire is a temporary fix — get your punctured tire repaired or replaced within a few days, because driving long distances on a spare can damage your vehicle.
  • Keep your jack, lug wrench, and spare tire in your vehicle at all times, and check that the spare holds air at least once a month.
  • If the lug nuts will not budge, do not force them — call roadside information rather than risk stripping them or injuring yourself.

Gather your tools and find a safe location

Pull over to a flat, stable surface away from traffic — a parking lot is better than the shoulder of a highway. Turn on your hazard lights and engage the parking brake. If you are on a slope, turn the steering wheel away from the road so the vehicle will not roll toward traffic if the jack fails.

Locate your jack, lug wrench, and spare tire. Most vehicles store these in the trunk or under the cargo floor. Check that your spare tire has air in it — a flat spare is useless. If you are not sure how to check tire pressure, look for the tire pressure gauge in your vehicle's toolkit or use a portable one you keep at home.

Loosen the lug nuts before jacking up the vehicle

This step is critical and straightforward to skip — do not skip it. Place the lug wrench on each lug nut and turn counterclockwise to loosen them about a quarter turn. You are not removing them yet, just breaking them loose so they will turn freely once the wheel is off the ground. If a lug nut is very tight, put your full weight on the wrench or ask another person to help.

If a lug nut will not budge after real effort, stop. Forcing it risks stripping the nut or the bolt underneath, which is expensive to fix. Call roadside information instead — they have power tools and experience with stuck fasteners.

Jack up the vehicle and remove the wheel

Locate the jacking point on your vehicle — this is usually a reinforced spot on the frame near the wheel, marked by a small notch or tab. Consult your owner's manual if you cannot find it; jacking at the wrong spot can damage the vehicle or cause the jack to slip. Position the jack under this point and raise the vehicle until the tire is about six inches off the ground.

Now finish removing the lug nuts by hand and set them somewhere you will not lose them — a cup or small container works well. Grip the tire near the center and pull it straight toward you to remove it from the hub. Set the flat tire aside.

Install the spare tire and hand-tighten the lug nuts

Lift the spare tire and align the holes with the bolts on the hub. Push it straight onto the bolts until it sits flush against the hub. Insert the lug nuts by hand and turn them clockwise until they are snug — you should feel resistance but not need tools yet. This keeps the spare from falling off when you lower the jack.

Lower the vehicle slowly by turning the jack handle counterclockwise. Once the tire touches the ground and the vehicle's weight is on the spare, you can remove the jack completely.

Tighten the lug nuts in a star pattern

Use the lug wrench to tighten the lug nuts in a star or cross pattern — if the wheel has five lugs, tighten the top one, then the bottom-left, then the right, then the bottom-right, then the left. This distributes pressure evenly and prevents the wheel from sitting crooked. Tighten each nut firmly, but do not use all your strength; you can overtighten and strip the bolt.

A good rule: tighten until you feel solid resistance, then give the wrench a quarter turn more. If you have a torque wrench at home, most vehicles need lug nuts tightened to between 80 and 120 foot-pounds, but check your owner's manual for the exact number.

Get the flat tire repaired or replaced soon

A spare tire is temporary. Full-size spares are designed for normal driving, but compact spares are meant only for short trips to a repair shop — driving more than 50 to 70 miles on a compact spare can overheat it and damage your vehicle's transmission or differential. Even with a full-size spare, get the punctured tire to a shop within a few days.

A tire repair shop can patch most punctures for $10 to $25 if the hole is in the tread and smaller than a quarter-inch. If the sidewall is damaged, the tire cannot be repaired and must be replaced. Keep the receipt and ask the shop to inspect your other tires for wear while you are there.

Maintain your spare tire and tools

Check your spare tire's air pressure once a month, the same way you check your other tires. A spare that sits unused can lose air slowly, and a flat spare will not help you when you need it. If the pressure is low, inflate it at a gas station or tire shop.

Keep your jack and lug wrench in your vehicle at all times. Some newer vehicles come with a tire repair kit instead of a spare — if yours does, learn how to use it before you need it, because the process is different and the kit has an expiration date.

Frequently Asked Questions

What if I do not have a spare tire?

Some vehicles come with a tire repair kit or sealant instead. These work by sealing small punctures from the inside, but they only work on holes in the tread, not sidewall damage. If your vehicle has a kit, read the instructions before you need it. If you have neither a spare nor a kit, call roadside information.

Can I drive on a spare tire for a long distance?

Compact spares should only be used for short trips to a repair shop — usually 50 to 70 miles maximum. Full-size spares can handle normal driving, but get your punctured tire fixed within a few days. Driving long distances on a spare, especially a compact one, can damage your transmission or differential.

What if the lug nuts are stuck and I cannot loosen them?

Do not force them — you risk stripping the bolt or injuring yourself. Call roadside information or a towing service. They have power tools and can remove stuck lug nuts without damage. It is worth the cost to avoid a much more expensive repair.

Do I need to tighten the lug nuts again after driving?

Yes. After driving a few miles on a newly installed wheel, stop and re-tighten the lug nuts in the star pattern. The wheel settles slightly as you drive, and the nuts can loosen. This is especially important with a spare tire, which you will be replacing soon anyway.

How do I know if my spare tire is full-size or compact?

A full-size spare is the same diameter as your other tires. A compact spare is noticeably smaller and thinner. Check your owner's manual or look at the spare itself — the sidewall usually says "temporary" or "compact" if it is not full-size. Compact spares are lighter and take up less space but have strict mileage limits.