The Goodyear Wrangler TrailRunner AT is a light-truck all-terrain tire built for trucks and SUVs that see both highway and unpaved roads

The Goodyear Wrangler TrailRunner AT (the "AT" stands for all-terrain) is designed for owners who drive on pavement most of the time but need grip on gravel, dirt, and light off-road surfaces. It sits between a highway tire and a heavy-duty off-road tire — it will handle a forest service road or a muddy job site, but it is not engineered for rock crawling or extreme terrain. The tread pattern is more aggressive than a standard all-season tire, with larger blocks and deeper grooves to bite into loose surfaces and shed mud.

This tire comes in sizes for light trucks, mid-size SUVs, and some full-size pickups. It is not a universal fit — you need to match the size code on your vehicle's door jamb or owner's manual. Installing the wrong size can affect your speedometer reading, fuel economy, and how your brakes and suspension perform.

Key Takeaways

  • The TrailRunner AT is built for vehicles that split time between paved roads and unpaved terrain, not for daily highway driving alone.
  • All-terrain tires wear faster on pavement than highway tires do, so expect shorter tread life if you drive mostly on asphalt.
  • You must match the tire size to your vehicle's specifications — the size code is printed on your door jamb, not on the old tire.
  • All-terrain tires are noisier on the highway than standard tires because of the aggressive tread design.
  • Proper inflation and rotation every 5,000 to 7,000 miles extend the life of any all-terrain tire and keep wear even.

How all-terrain tread design affects grip and wear

The TrailRunner AT has larger tread blocks and wider gaps between them than a highway tire. Those gaps allow the tire to grip gravel and dirt by letting loose material pack into the tread, then release it as the tire rolls. On pavement, those same gaps mean less rubber is in contact with the road at any moment, which reduces grip in wet conditions and increases rolling resistance — the force your engine has to overcome to keep the tire moving.

This trade-off is why all-terrain tires wear faster on highways. The tread blocks flex more as they roll over pavement, generating heat and wearing rubber away quicker than a stiffer highway tire would. If you drive mostly on interstates and city streets, a highway or all-season tire will last longer and cost less over time. If you regularly drive unpaved roads, the TrailRunner AT's durability on those surfaces justifies the shorter highway life.

The sidewalls of all-terrain tires are also thicker and stiffer than highway tires to resist punctures from rocks and sharp debris. This adds weight and stiffness, which you will feel as a slightly rougher ride on smooth pavement — another reason these tires are a compromise rather than a perfect fit for highway-only driving.

Noise and fuel economy on pavement

All-terrain tires are noticeably louder on the highway than highway or all-season tires. The noise comes from the larger tread blocks slapping the pavement as they roll. Some drivers find this acceptable; others find it tiring on long drives. Test drive a vehicle equipped with TrailRunner ATs before you commit if highway noise matters to you.

Fuel economy typically drops 2 to 5 percent compared to a highway tire, depending on your vehicle and driving habits. The thicker sidewalls and stiffer construction increase rolling resistance, which means your engine works harder to maintain speed. Over a year of driving, this can add up to real fuel cost — calculate whether the terrain you drive justifies the fuel penalty.

Matching the tire size to your vehicle

Your vehicle's correct tire size is printed on a label inside the driver's door jamb, on the fuel door, or in your owner's manual. The label shows a code like LT245/75R16. Each part means something: LT means light truck, 245 is the width in millimeters, 75 is the sidewall height as a percentage of width, R means radial construction, and 16 is the wheel diameter in inches.

Installing a different size changes how your speedometer reads, how your brakes and suspension respond, and how much weight the tire can safely carry. A tire that is too small may not support your vehicle's weight; a tire that is too large can rub the suspension or fender. Always match the size code exactly. If you want a different size — for example, to fit larger wheels — consult a tire professional or your vehicle's manufacturer first.

The TrailRunner AT comes in sizes ranging from 15 to 20 inches in wheel diameter, but not every size is available for every vehicle. Check the Goodyear website or a tire retailer to confirm the TrailRunner AT is made in the size your vehicle needs.

Load rating and speed rating matter for safety

Every tire has a load index and a speed rating printed on the sidewall. The load index is a number that corresponds to the maximum weight the tire can carry at full pressure — for example, a load index of 121 means the tire can carry 1,550 pounds. Your vehicle's door jamb label tells you the minimum load index required. Never install a tire with a lower load index than specified.

The speed rating is a letter (H, T, S, etc.) that indicates the maximum speed the tire is designed for. The TrailRunner AT typically carries an H or T rating, meaning it is safe for highway speeds. This does not mean you should drive at that speed in bad conditions — it means the tire is engineered to handle that speed safely under normal conditions.

Exceeding either the load or speed rating can cause the tire to overheat, fail suddenly, and cause loss of control. If your vehicle is heavily loaded — towing, carrying cargo, or loaded for a trip — check that your tire's load index is adequate for the total weight.

Rotation, inflation, and maintenance extend tire life

Rotate your TrailRunner ATs every 5,000 to 7,000 miles to wear them evenly. All-terrain tires wear unevenly if left in one position because the tread blocks flex differently depending on whether the tire is on the front or rear axle. Uneven wear shortens the life of the tire and can create vibration or noise.

Check tire pressure monthly and before long trips. The correct pressure is printed on your door jamb label, not on the tire sidewall — the sidewall shows the maximum pressure, which is higher than the recommended pressure. Under-inflated tires wear faster, generate heat, and reduce fuel economy. Over-inflated tires wear in the center and reduce grip. Use a reliable pressure gauge; gas station gauges are often inaccurate.

Inspect the tread depth regularly using the penny test: insert a penny upside down into the tread. If you can see the top of Lincoln's head, the tread is at 2/32 of an inch, which is the legal minimum for highway driving. At that depth, the tire has lost most of its grip in wet conditions and should be replaced. Many drivers replace tires at 4/32 of an inch for better safety margin.

When the TrailRunner AT is the right choice

Choose the TrailRunner AT if you regularly drive unpaved roads — forest service roads, ranch roads, construction sites, or similar terrain — and you want a tire that handles those surfaces better than a highway tire would. The improved grip on loose surfaces and puncture resistance in the sidewalls justify the trade-offs in highway wear and noise.

Do not choose the TrailRunner AT if you drive only on pavement and paved parking lots. A highway or all-season tire will last longer, cost less over time, and provide better fuel economy and a quieter ride. The TrailRunner AT is a tool for a specific job; using it for a different job wastes money.

If you are unsure whether your driving patterns justify an all-terrain tire, track your trips for a month. Count how many miles you drive on unpaved roads versus pavement. If unpaved driving is less than 10 percent of your total miles, a highway or all-season tire is probably the better choice. If it is 20 percent or more, the TrailRunner AT makes sense.

Frequently Asked Questions

Can I use the TrailRunner AT in snow?

All-terrain tires provide better traction in snow than highway tires because of the larger tread blocks and stiffer sidewalls. However, they are not winter tires. Winter tires have a different rubber compound that stays flexible in cold, plus finer sipes (thin cuts in the tread) that grip ice. In heavy snow or ice, winter tires outperform all-terrain tires. In light snow and cold rain, the TrailRunner AT is adequate if you drive carefully.

How long do Goodyear Wrangler TrailRunner ATs last?

Tread life depends on your driving habits, road surfaces, and maintenance. On pavement, expect 30,000 to 50,000 miles. On mixed pavement and unpaved roads, expect 25,000 to 40,000 miles. Goodyear offers a treadwear warranty on the TrailRunner AT; check the warranty document for the specific mileage covered on your purchase.

Do I need to balance and align my wheels when I install new tires?

Yes. Balancing corrects weight imbalances that cause vibration. Alignment ensures your wheels point straight and your suspension is square to the road. Both affect how evenly your new tires wear. Have both done when you install new tires, and have alignment checked annually or whenever you notice pulling or uneven wear.

What is the difference between the TrailRunner AT and other Goodyear all-terrain tires?

Goodyear makes several all-terrain lines — the TrailRunner AT, the Wrangler TrailRunner AT, and others — each with different tread patterns and compounds. The TrailRunner AT is positioned as a mid-range all-terrain tire, balancing highway comfort with off-road capability. Compare the tread design and warranty of each model to see which fits your needs and budget.