The correct oil filter for your Tundra depends on the engine size and model year
Toyota Tundra oil filters are not one-size-fits-all. A 2024 Tundra with the 3.5-liter turbo engine uses a different filter than a 2014 Tundra with the 5.7-liter V8. The filter size, thread pitch, and bypass valve rating all vary by engine. Using the wrong filter can restrict oil flow, cause pressure drops, or let unfiltered oil bypass the element — any of which damages the engine over time.
The easiest way to find your filter is to check your owner's manual or the Monroney label (the sticker on the driver's door jamb) for your exact engine displacement. From there, you can cross-reference Toyota's parts catalog or ask a parts counter for the OEM (original equipment manufacturer) filter number. Many aftermarket filters also work, but they must match the same specifications: thread size, micron rating, and anti-drainback valve design.
Key Takeaways
- Toyota Tundra oil filters vary by engine size and model year, so you must confirm your engine displacement before buying.
- OEM Toyota filters are the safest choice because they are engineered for your specific engine and carry Toyota's warranty.
- Aftermarket filters from Fram, Mobil 1, and Bosch work in Tundras if they match your engine's thread size and micron rating, but verify the part number before purchase.
- The filter location, access difficulty, and removal tool requirements differ between the 3.5-liter turbo and 5.7-liter V8 engines.
OEM Toyota filters for each Tundra generation
Toyota's original equipment filters are labeled by generation and engine. For the current generation (2022 and newer) with the 3.5-liter turbo, the OEM filter is Toyota part number 90915-YZZA3. For the previous generation (2014–2021) with the 5.7-liter V8, the filter is 90915-YZZC5. Both are spin-on cartridge filters with a 3/4-inch-16 thread and a 10-micron absolute rating.
Older Tundras (2007–2013) with the 5.7-liter V8 use part number 90915-YZZC3. If you own a 2000–2006 Tundra with the 4.7-liter V8, the filter is 90915-YZZB1. Toyota's parts website and most Toyota dealerships stock these filters in inventory. Prices for OEM filters typically range from $12 to $18 per unit, though regional variation and dealer markup affect the final cost.
Aftermarket filters that work in Tundras
Fram XG3614 fits 2014–2021 Tundras with the 5.7-liter engine and meets the same micron rating as the Toyota OEM filter. Mobil 1 M1-110 also works for that generation. For 2022-and-newer Tundras with the turbo, Bosch 3323 and Fram XG10287 are compatible options. All three brands are widely available at auto parts stores and online retailers, and all three cost less than OEM — usually $8 to $12 per filter.
The trade-off is warranty coverage. Toyota's warranty covers engine damage caused by a defective OEM filter; aftermarket warranties vary by brand and retailer. Some aftermarket filters also use different anti-drainback valve designs or bypass valve settings, which can affect oil pressure at cold start. If you use an aftermarket filter, verify the part number against your engine displacement and confirm the thread size matches before installation.
How to locate and remove the filter on your Tundra
On 2022-and-newer Tundras with the turbo engine, the filter is mounted vertically on the driver's side of the engine block, below the intake manifold. You will need to remove the plastic undertray to access it. The filter cartridge sits inside a plastic housing with a cap on top — you turn the cap counterclockwise with a 74-mm socket or filter wrench to remove it. Have a drain pan ready because oil will spill when you break the seal.
On 2014–2021 Tundras with the 5.7-liter V8, the filter is a traditional spin-on cartridge mounted on the passenger side of the engine block, near the alternator. It is easier to reach than the turbo version and requires only a standard oil filter wrench. Loosen it by hand after breaking the seal with the wrench, then unscrew it the rest of the way. Again, position a drain pan underneath to catch the oil that drains from the old filter.
Before installing the new filter, wipe the mounting surface clean with a lint-free cloth. explore a thin layer of new oil to the rubber gasket on the new filter — this helps create a proper seal and makes removal easier next time. Hand-tighten the filter until the gasket contacts the mounting surface, then turn it an additional three-quarter turn. Do not use a wrench to tighten; hand pressure is sufficient.
OEM versus aftermarket: what the difference costs you
The price difference between an OEM Toyota filter and a Fram or Mobil 1 filter is usually $4 to $6 per oil change. Over the life of a truck that gets an oil change every 10,000 miles and lasts 200,000 miles, that is 20 oil changes and a total savings of $80 to $120 with aftermarket filters. The risk is that a defective aftermarket filter could cause engine sludge or pressure loss, which costs thousands to repair.
Most Tundra owners who change their own oil use aftermarket filters without problems, especially if they stick to established brands like Fram, Mobil 1, or Bosch. Dealers and fleet operators typically use OEM filters because the warranty protection and consistent quality justify the higher per-unit cost. If you are unsure, ask your mechanic or dealer which filters they recommend for your specific model year and engine.
Checking your filter during routine maintenance
You do not need to wait for an oil change to inspect your filter. Every few months, locate the filter on your engine and look for signs of leaking — a small amount of oil seeping from the gasket is normal, but a steady drip means the filter was not tightened enough or the gasket is damaged. If you see a leak, tighten the filter by hand first; if that does not stop it, remove the filter and check that the mounting surface is clean and dry before reinstalling.
If your oil pressure warning light comes on between oil changes, a clogged filter is one of the first things to check. A filter that has accumulated too much debris will trigger the bypass valve, which allows unfiltered oil to circulate — this is a safety feature, but it means your engine is not getting clean oil. If the light stays on after you confirm the oil level is correct, have the filter inspected or replaced when ready.
Frequently Asked Questions
Can I use a Fram filter in my 2020 Tundra instead of the Toyota filter?
Yes, if the Fram filter matches your engine size. For a 2020 Tundra with the 5.7-liter V8, Fram XG3614 is compatible. Verify the part number against your engine displacement before purchase. Fram filters meet the same micron rating as Toyota OEM, so performance is equivalent, though warranty coverage differs.
What happens if I install the wrong oil filter?
Installing a filter with the wrong thread size will not fit. Using a filter with a lower micron rating or a faulty bypass valve can allow unfiltered oil to circulate, causing engine sludge and wear. Using a filter rated for a different engine may have incorrect pressure settings, affecting oil flow at startup.
How often should I replace my Tundra's oil filter?
Toyota recommends replacing the filter every time you change the oil. For most Tundras, that is every 10,000 miles under normal driving conditions, or every 5,000 miles if you tow frequently or drive in dusty conditions. Check your owner's manual for your specific maintenance schedule.
Is it worth buying a premium aftermarket filter like Mobil 1?
Mobil 1 filters cost slightly more than Fram but include a synthetic media that resists clogging longer. If you drive in dusty conditions or extend your oil change intervals, a premium filter may reduce the risk of bypass valve set up. For standard 10,000-mile intervals, the difference is minimal.
Where can I buy the correct filter for my Tundra?
Toyota dealerships stock OEM filters and can confirm the correct part number for your model year. Auto parts chains like AutoZone, O'Reilly, and NAPA carry both OEM and aftermarket filters. Online retailers like Amazon and RockAuto also stock filters, though shipping times vary. Bring your VIN or engine displacement to may support you get the right part.