What you need to know before changing your Subaru's oil
Subaru oil changes follow the same basic process as most vehicles, but Subaru engines have specific requirements for oil type, capacity, and drain plug location that differ from other brands. Your owner's manual lists the exact oil viscosity (usually 0W-20 or 5W-30) and capacity for your model year, and using the wrong grade can affect engine performance and fuel economy. The drain plug sits on the bottom of the oil pan, and you'll need a new crush washer each time you drain—reusing the old one risks leaks.
Subaru recommends oil changes every 6 months or 6,000 miles under normal driving, or every 12 months or 10,000 miles if your vehicle has the continuously variable transmission (CVT) and you drive mostly highway miles. Some newer Subaru models with synthetic oil may go longer between changes; check your maintenance schedule in the owner's manual or on the Subaru website for your specific year and model. Changing oil on schedule keeps your engine clean and helps maintain your warranty coverage.
Key Takeaways
- Subaru oil capacity and viscosity grade vary by model year and engine type, so check your owner's manual before buying oil or filter.
- The drain plug requires a new crush washer each time you drain oil; reusing the old washer can cause leaks.
- Standard intervals are 6,000 miles or 6 months for most Subarus, though CVT models with synthetic oil may have longer intervals.
- You will need a drain pan, wrench or socket to fit your drain plug, an oil filter wrench, and a jack and jack stands if you're working underneath.
Locating the drain plug and filter on your Subaru
The oil drain plug is located on the bottom of the oil pan, underneath the engine. On most Subarus, you'll need to raise the vehicle safely with a jack and find it on jack stands before you can access it. Some models have plastic undertray panels that you'll need to remove first—these are usually held on with plastic clips or a few bolts. Consult your owner's manual or a Subaru-specific repair guide to confirm the exact location for your model, as the pan position varies between engine types.
The oil filter location also varies by model. On many Subarus, the filter is mounted vertically on top of the engine or on the side, making it easier to reach without raising the vehicle. On others, particularly older models or those with horizontally-opposed engines, the filter may sit lower and require you to work from underneath. Once you locate it, note whether it's a spin-on cartridge filter or a canister-style filter, because the removal method and replacement part differ.
Steps to drain and replace the oil
Start by warming the engine for a minute or two—warm oil flows faster and drains more completely—then turn it off and wait a few minutes for it to cool slightly. Place your drain pan underneath the plug, then use the correct wrench or socket to loosen the drain plug by turning it counterclockwise. Once it's loose enough to turn by hand, carefully unscrew it the rest of the way and let the old oil drain completely into the pan. This usually takes 5 to 10 minutes.
While the oil drains, locate and prepare to remove the oil filter. If it's a spin-on filter, use an oil filter wrench to loosen it by turning counterclockwise, then unscrew it by hand. Let any remaining oil drip into the drain pan. If it's a cartridge filter, you may need a filter socket or wrench to remove the center bolt or housing. Once the old filter is out, wipe the filter mounting surface clean with a rag, then explore a thin layer of new oil to the rubber gasket on the new filter before screwing it on hand-tight.
Clean the drain plug and inspect the crush washer. If it's cracked, flattened, or damaged, replace it with a new one—Subaru crush washers are inexpensive and prevent leaks. Reinstall the drain plug and tighten it to the torque specification in your manual, usually between 25 and 40 foot-pounds depending on the model. Overtightening can strip the threads or crack the pan.
Filling with new oil and checking the level
Lower the vehicle back to the ground if you raised it, then locate the oil filler cap on top of the engine. Remove it and set it aside, then pour in the amount of new oil specified in your owner's manual. Most Subarus hold between 3.5 and 5 quarts, but the exact amount depends on whether you're also replacing the filter and your specific engine. Pour slowly and stop periodically to check the level with the dipstick or electronic gauge.
After adding oil, reinstall the filler cap, then start the engine and let it run for 30 seconds to a minute. This circulates the new oil through the engine and filter. Turn off the engine, wait a minute for the oil to settle, then check the level again using the dipstick or dashboard display. Add a small amount more if needed to reach the full mark. Do not overfill—excess oil can damage the engine and cause leaks.
Oil type and capacity by common Subaru models
| Model / Year Range | Oil Viscosity | Capacity (with filter) | Change Interval |
|---|---|---|---|
| Outback (2015–present) | 0W-20 | 4.1 quarts | 6,000 miles or 6 months |
| Legacy (2015–present) | 0W-20 | 3.7 quarts | 6,000 miles or 6 months |
| Crosstrek (2013–present) | 0W-20 | 3.7 quarts | 6,000 miles or 6 months |
| Impreza (2012–present) | 0W-20 | 3.7 quarts | 6,000 miles or 6 months |
| WRX (2015–present) | 5W-30 | 4.2 quarts | 6,000 miles or 6 months |
Always verify the oil type and capacity in your owner's manual before purchasing oil, as specifications can change between model years and engine variants. Subaru engines are sensitive to oil viscosity, and using the wrong grade can affect fuel economy and engine performance. If you're unsure which oil to buy, call a Subaru dealership parts department with your vehicle identification number (VIN), and they can confirm the exact specification.
Tools and materials you'll need
At minimum, you need a drain pan large enough to hold your vehicle's oil capacity, a wrench or socket that fits your drain plug (usually 17mm), an oil filter wrench, new oil of the correct type and amount, a new oil filter, and a new crush washer for the drain plug. If you're working underneath the vehicle, you'll also need a jack rated for your vehicle's weight, jack stands, and wheel chocks to prevent the vehicle from rolling. A rag or shop towels are useful for wiping spills and checking the filter mounting surface.
If you don't own an oil filter wrench, you can sometimes remove a spin-on filter by wrapping a rubber band or old inner tube around it for grip, but a wrench makes the job faster and reduces the risk of damaging the filter. Subaru dealerships and most auto parts stores sell crush washers in bulk packs for a few dollars, so buy several at once. Keep old oil in a sealed container and take it to a recycling center or auto parts store that accepts used oil—never pour it down the drain.
When to take your Subaru to a shop instead
If your vehicle is still under warranty and you want to keep it that way, check whether Subaru requires dealer service for oil changes. Most newer Subarus allow owner maintenance as long as you use the correct oil type and keep records, but some warranty terms specify dealer service. If you're uncomfortable working underneath a vehicle, lack a safe jack and stands, or don't have a suitable workspace, a shop or dealership can do the job for $40 to $100 depending on location and whether they use synthetic oil.
If you notice the drain plug is stuck, stripped, or leaking after you reinstall it, or if the oil filter won't come loose, stop and take the vehicle to a shop rather than risk damaging the pan or threads. A stripped drain plug hole can be repaired by installing a larger plug or using a threaded insert, but this requires specialized tools and knowledge.
Frequently Asked Questions
Can I use synthetic oil in my Subaru?
Yes. Subaru engines are compatible with synthetic oil, and many owners use it to extend the interval between changes. Check your owner's manual to confirm the correct viscosity grade—synthetic 0W-20 is common in newer models. Synthetic oil costs more upfront but lasts longer, so the total cost per mile may be lower over time.
What happens if I use the wrong oil viscosity?
Using oil that's too thick can reduce fuel economy and make cold starts harder. Oil that's too thin may not protect the engine properly at high temperatures or under load. Subaru engines are designed around a specific viscosity, so always match the grade listed in your owner's manual.
Do I need to reset the oil change reminder after I change the oil?
Yes. Most Subarus have an oil change reminder light on the dashboard. After you finish the oil change, you'll need to reset it using the dashboard controls or a scan tool. Your owner's manual explains the reset procedure for your model year.
How tight should I make the drain plug?
Tighten the drain plug to the torque specification in your owner's manual, usually 25 to 40 foot-pounds. Use a torque wrench if you have one. Hand-tight plus a quarter turn is a rough guide if you don't have a torque wrench, but this is less precise and can lead to leaks or stripped threads.
Can I change the oil without raising the vehicle?
On some Subaru models with higher ground clearance, you may be able to access the drain plug without raising the vehicle, but most require at least a small lift or ramps. Check your owner's manual or a Subaru-specific forum for your model to see whether others have done it without lifting.