The Forester uses a cartridge-style filter that sits on top of the engine, not a spin-on filter underneath

Subaru Foresters from 2009 onward use a cartridge oil filter mounted vertically on the top of the engine, rather than the spin-on canisters you might be familiar with from other vehicles. This design means you access it from above, not from underneath the car. The filter element itself is a pleated paper cylinder that slides into a plastic or metal housing, and you replace only the element — not the entire canister.

The exact location and part number depend on your model year and engine type. A 2015 Forester with a 2.5-liter engine uses a different filter than a 2020 model, and the newer turbocharged Foresters (2019 and later) have their own specifications. You can find the correct part number in your owner's manual under "Maintenance" or "Fluid Capacities," or by calling a Subaru dealer with your VIN.

Key Takeaways

  • Subaru Forester oil filters are cartridge-style elements accessed from the top of the engine, not spin-on filters underneath.
  • The correct filter part number varies by model year and engine size, so check your owner's manual or provide your VIN to a parts supplier.
  • Replacement takes about 10 to 15 minutes and requires an oil filter wrench, a drain pan, and a new crush washer for the drain plug.
  • OEM Subaru filters cost between $8 and $15, while aftermarket options from Fram, Mobil 1, or Bosch typically run $6 to $12.

Finding the correct filter part number for your year and engine

The easiest way to get the right part is to provide your vehicle identification number (VIN) to any auto parts store — RockAuto, AutoZone, O'Reilly, NAPA, and Advance Auto Parts all have lookup tools on their websites. Enter your VIN, select "Oil Filter" from the category, and the system will show you the compatible options. This eliminates guessing and ensures you do not buy the wrong size or thread pattern.

If you prefer to look it up yourself, your owner's manual lists the filter specification in the maintenance section. For example, a 2015 Forester 2.5L uses Subaru part number 15208AA051, while a 2020 Forester 2.5L uses 15208AA160. Turbocharged models (2019+) have a different part number again. Once you have the number, you can search it on any parts website to see pricing and availability across brands.

OEM versus aftermarket filters and what the difference costs

Genuine Subaru filters (OEM) typically cost $10 to $15 per unit and are made to Subaru's specifications. Aftermarket brands like Fram, Mobil 1, Bosch, and Purolator offer compatible cartridge filters for $6 to $12, depending on the brand and where you buy. Both types work in your Forester; the choice comes down to brand loyalty and budget.

Aftermarket filters from major manufacturers meet or exceed industry standards and carry the same warranty protection as OEM parts at most retailers. If you are doing your own oil changes and buying filters in bulk, aftermarket can save you $3 to $5 per change over the life of the vehicle. If you prefer the assurance of factory parts or have a dealer handle the service, OEM is the straightforward choice.

Step-by-step replacement process and tools you will need

You will need an oil filter wrench (a socket-style wrench sized for your filter housing cap — typically 86 mm or 90 mm for Foresters), a drain pan, a new crush washer for the drain plug, fresh oil, and a clean rag. Locate the filter housing on top of the engine — it is a cylindrical cap with a center bolt. Unscrew the housing cap using the filter wrench, turning counterclockwise. The old filter element will come out with it.

Drain the old oil from the housing into your pan, then inspect the rubber seal on the inside of the cap. If it is cracked or hardened, replace it (Subaru sells a seal kit for a few dollars). Install the new filter element into the housing, hand-tighten the cap back onto the engine, then snug it with the wrench — do not over-tighten. Refill the engine with the correct amount and grade of oil, start the engine, and check the oil pressure light. The whole job takes 10 to 15 minutes once you have the tools.

Where to buy filters and typical pricing by retailer

Online retailers like RockAuto and Amazon often have the lowest prices, especially if you buy multiple filters at once. RockAuto typically stocks both OEM and aftermarket options and ships quickly; Amazon offers Prime shipping on many filters. Local auto parts stores (AutoZone, O'Reilly, NAPA, Advance Auto Parts) let you pick up the same day and often price-match online competitors.

Subaru dealers stock OEM filters but usually charge a markup — expect to pay $12 to $18 for the same filter that costs $10 to $12 online. If you are having the dealer perform the oil change, the filter is included in the service cost, which typically runs $40 to $75 depending on location and oil type. For DIY work, buying online or at a local parts store saves money and gives you more brand choices.

Common mistakes to avoid during filter replacement

The most common error is over-tightening the filter housing cap, which can crack the plastic cap or strip the threads on the engine. Hand-tighten the cap first, then use the wrench to snug it another three-quarters of a turn — you do not need to crank it hard. Another mistake is forgetting to replace the crush washer on the drain plug; reusing an old washer can cause slow leaks. Always use a new washer every time you drain oil.

A third error is installing the filter element upside down or not seating it fully in the housing. The element should slide straight down into the cap and rest flat on the bottom. If it does not slide smoothly, check that you are not forcing it at an angle. Finally, do not forget to refill the oil after draining — running the engine dry will damage it. Check the dipstick or digital level after starting the engine to confirm you have the right amount.

Frequently Asked Questions

How often should I replace my Forester oil filter?

Subaru recommends replacing the oil filter every time you change the oil. For most Foresters, that is every 6,000 miles with conventional oil or every 10,000 miles with synthetic oil, depending on your model year and driving conditions. Check your owner's manual for the specific interval for your vehicle.

Can I use a spin-on filter instead of the cartridge filter?

No. Subaru Foresters use a cartridge-style filter mounted on top of the engine, and there is no direct spin-on equivalent. Attempting to modify the system or use an incompatible filter will cause leaks and engine damage. Stick with the cartridge filter specified for your model year.

What happens if I over-tighten the filter housing cap?

Over-tightening can crack the plastic cap or strip the threads where it screws onto the engine. If the cap cracks, you will need to replace it (usually $15 to $25 for the cap alone). Hand-tighten first, then use the wrench to snug it about three-quarters of a turn — that is all the pressure needed.

Is the crush washer on the drain plug really necessary?

Yes. The crush washer creates a seal that prevents oil from leaking around the drain plug. Reusing an old washer that has already been crushed will not seal properly. A new washer costs less than a dollar and takes two seconds to install — it is worth doing every time.

Can I take my Forester to any shop for an oil change, or does it need to be a Subaru dealer?

Any shop that works on cars can perform an oil change on your Forester, including independent mechanics and chain shops like Jiffy Lube or Valvoline. They just need to know you have a cartridge filter, not a spin-on. Dealer service is not required, though some owners prefer it for warranty documentation.