The oil change light resets differently depending on your Honda's year and model, but most owners can do it themselves in under a minute without any tools
Your Honda's oil change light (also called the maintenance reminder or wrench icon) is a message from your vehicle's computer telling you that the oil change interval has been reached. Once you've changed the oil and filter, the light needs to be manually reset — it won't turn off on its own. The reset process varies: some Hondas use a combination of dashboard button presses, others require the ignition key, and newer models with touchscreens have menu-based resets. Knowing which method applies to your car saves you a trip to the dealer and takes only a few minutes.
Key Takeaways
- Most Honda oil change lights reset through a sequence of ignition and button presses on the dashboard, with no tools required.
- Older Hondas (pre-2000s) often use the trip odometer reset button, while newer models use the select or menu button near the steering wheel.
- Touchscreen-equipped Hondas require navigating to the maintenance menu through the infotainment system rather than physical buttons.
- If the light returns when ready after reset, the computer may not have registered that the oil change was completed, or there may be a sensor fault.
- Your owner's manual contains the exact reset procedure for your specific model year and trim level.
Reset method for 2000–2015 Honda models
Most Hondas from this era reset the oil light using the trip odometer button, usually located on the instrument cluster or steering wheel stalk. Turn the ignition to the "On" position without starting the engine. Press and hold the trip odometer reset button (or the select/reset button on the steering wheel) until the oil change light begins to flash. This typically takes 5 to 10 seconds. Continue holding until the light goes out completely — you may see it flash once more before disappearing. Release the button and turn the ignition off.
If your Honda has a multi-function steering wheel with a select button, the process is similar: turn the key to "On", use the select button to navigate to the maintenance or oil life display on your instrument cluster, then press and hold select until the light resets. The exact button location and sequence varies by model, so check your owner's manual if the first attempt doesn't work.
Reset method for 2016–2023 Honda models with physical buttons
Newer Hondas without a full touchscreen typically use the menu or select button on the steering wheel to access the maintenance reset. Turn the ignition to "On" without starting the engine. Press the menu or select button repeatedly until you see "Oil Life" or "Maintenance" displayed on your instrument cluster screen. Once you've found the oil life menu, press and hold the select button for several seconds until a reset option appears. Select "Reset" or "Yes" when prompted, and the light should turn off when ready.
Some 2016–2020 models require you to scroll through a settings menu rather than hold a single button. If holding the button doesn't work, try pressing it multiple times in quick succession to cycle through menu options. The instrument cluster display will guide you through the steps once you're in the maintenance menu.
Reset method for Honda models with touchscreen infotainment
Hondas equipped with a central touchscreen (typically 2018 and newer, especially Accord, CR-V, and Civic models) reset the oil light through the vehicle settings menu. Turn the ignition to "On" without starting the engine. On the touchscreen, navigate to Settings or Vehicle Settings, then look for Maintenance or Service. Select Oil Life or Oil Change and choose Reset. The screen will confirm the reset, and the oil change light on your instrument cluster should disappear.
If you cannot find the maintenance menu on your touchscreen, check whether your Honda has a separate instrument cluster display with its own buttons. Some models allow you to reset through either the touchscreen or the steering wheel controls. If the touchscreen is unresponsive or the menu structure differs from what you expect, consult your owner's manual or the quick-reference guide in your glove compartment — Honda's menu layouts vary by model year and infotainment system version.
What to do if the oil light won't reset or returns when ready
If you've followed the correct reset procedure and the light either won't turn off or comes back on within a few days, the issue is usually not the reset itself but a sensor or computer problem. The most common cause is that the oil change wasn't fully registered by the vehicle's system — this can happen if the engine wasn't running long enough after the oil change for the computer to update, or if the battery was disconnected during service. Try starting the engine, letting it idle for 30 seconds, then turning it off and attempting the reset again.
A persistent or recurring oil light can also indicate a genuine fault: a faulty oil pressure sensor, a problem with the oil level, or a computer error. If the light returns after a successful reset and you know the oil was changed correctly, have the vehicle scanned with a diagnostic tool to check for sensor codes. A Honda dealership or independent shop with OBD-II scanning capability can identify whether the issue is a sensor malfunction or something else requiring attention.
Finding your specific reset procedure in the owner's manual
Your Honda's owner's manual contains the exact reset steps for your model year and trim level, and it's the most reliable source if the general procedures above don't match your vehicle. The manual is usually in your glove compartment; if not, you can read a PDF version from Honda's owner portal using your VIN (vehicle identification number), or search online for "[Your Model Year] Honda [Model Name] owner's manual PDF."
Look for sections titled "Maintenance Reminder," "Oil Change Light," "Service Reminder," or "Wrench Icon" in the index. The manual will show you exactly which buttons to press, how long to hold them, and what you should see on your display at each step. If you're still unsure after reading the manual, a quick call to your Honda dealer's service department can confirm the procedure — they can walk you through it over the phone at no cost.
Why the oil change light exists and what it means
The oil change light is a maintenance interval reminder based on time and engine running hours, not actual oil condition. Honda's system calculates when your next oil change is due based on your driving habits — the computer tracks engine load, temperature, and idle time to estimate how quickly your oil degrades. This is more accurate than a straightforward mileage counter, because stop-and-go city driving wears oil faster than highway miles.
The light turning on doesn't mean your oil is dirty or unsafe right now; it means the interval Honda recommends for your driving pattern has been reached. Resetting the light tells the computer to start counting down to the next service interval. If you ignore the light and continue driving, it will stay on as a persistent reminder, but it won't prevent the engine from running. However, ignoring oil changes damages the engine over time — the light exists because regular oil changes are one of the most important things you can do to keep your Honda reliable.
Frequently Asked Questions
Can I reset the oil light without changing the oil?
Yes, you can reset it — the light is just a reminder, not a safety lockout. However, resetting it without changing the oil defeats the purpose of the maintenance system. Your engine will continue to run, but you'll lose track of when the oil actually needs changing, which can lead to engine damage from old, degraded oil.
What if I don't know my Honda's model year or trim level?
Check your vehicle registration, insurance documents, or the door jamb label on the driver's side. You can also look at your VIN (17-character code on the dashboard or registration) — the 10th digit indicates the model year. Once you have the year and model name, search for your specific owner's manual online or call a Honda dealer with your VIN.
Does resetting the oil light erase any other maintenance reminders?
No. Resetting the oil change light only resets the oil interval counter. Other maintenance reminders (air filter, transmission fluid, coolant) operate on separate intervals and won't be affected by resetting the oil light.
Why does my Honda have both a wrench icon and an oil can icon?
Some Hondas display a wrench icon for general maintenance reminders and a separate oil can or oil drop icon specifically for oil changes. Both indicate that service is due, but they may reset separately or through different menu paths. Check your owner's manual to see which reminder applies to your vehicle and how each one resets.
Is it normal for the oil light to come back on a few weeks after an oil change?
No. Once reset, the light should stay off for months (depending on your driving). If it returns within weeks, the reset may not have taken, the battery may have been disconnected, or there could be a sensor fault. Try the reset procedure again, and if the light returns a second time, have the vehicle scanned for diagnostic codes.