A remote oil filter kit moves your oil filter away from the engine to make changes easier

A remote oil filter kit is a plumbing system that relocates your vehicle's oil filter from its factory location (usually tucked against the engine block) to a spot that's easier to reach—often mounted on the frame, inner fender, or firewall. Instead of the filter screwing directly onto the engine, a hose carries oil from the engine to the remote filter housing and back. The filter itself stays cleaner and cooler because it sits away from engine heat, and you can change it without contorting yourself under the hood or removing other parts.

Remote filter kits are most common on trucks, SUVs, and performance vehicles where the factory filter location is cramped or where owners change oil frequently. They're optional—your vehicle runs fine without one—but they save time and frustration if you do your own maintenance or if your filter is genuinely hard to reach.

Key Takeaways

  • A remote oil filter kit moves your filter away from the engine block to a more accessible location on the frame or fender.
  • The kit includes a filter housing, hoses, fittings, and mounting brackets; you'll need basic tools and some mechanical confidence to install it.
  • Installation takes two to four hours and requires disconnecting the factory filter, running new lines, and securing the remote housing.
  • Remote filters run cooler and stay cleaner than factory-mounted filters, which can extend filter life slightly in some cases.
  • Cost ranges from $150 to $500 depending on vehicle type and kit quality; performance and truck-focused brands tend to be more expensive.

What comes in a remote oil filter kit

A complete kit includes a filter housing (the canister that holds the filter element), inlet and outlet hoses with fittings, mounting brackets, and hardware. Some kits come with the filter element itself; others don't. The housing is usually aluminum or steel and sized to match your engine's oil flow rate. Hoses are reinforced rubber or braided steel designed to handle oil pressure without leaking.

Quality varies by brand. Truck-focused manufacturers like AirDog, Wix, and Fram offer kits engineered for specific vehicles with detailed instructions. Generic kits from online retailers are cheaper but may require custom hose routing or adapter fittings. Before ordering, confirm the kit is designed for your vehicle's year, make, and engine size—a kit for a 5.7L engine won't work on a 3.5L.

How to install a remote oil filter kit

Installation requires you to disconnect the factory filter, cap the engine ports, run new hoses to the remote location, and find the housing. Start by warming the engine slightly (not hot) to thin the oil, then drain it completely. Remove the factory filter and clean the mounting surface. Install the adapter block or sandwich plate onto the engine—this is where the new hoses connect. Some kits use a plate that screws where the filter was; others use an in-line adapter in the oil line.

Route the inlet and outlet hoses from the engine to your chosen remote location, securing them away from heat sources, moving parts, and sharp edges. Mount the filter housing using the included brackets, ensuring it's level and won't vibrate against the frame. Connect the hoses to the housing with the provided fittings, hand-tighten them, then use a wrench to snug them—don't over-tighten, as that can crack the housing. Fill the engine with fresh oil, start it, and check for leaks around all connections. Let it idle for a minute, shut it off, wait five minutes, and check the level again.

The whole process typically takes two to four hours if you're comfortable working under a vehicle. If you've never done it, budget extra time and have a manual or video guide open. If you're unsure at any step, a shop can install it for $200 to $400 in labor.

Choosing a mounting location for the remote housing

Common spots are the inner fender, frame rail, firewall, or shock tower—anywhere that's accessible, away from exhaust components, and won't interfere with steering or suspension. Trucks often use the frame rail behind the cab or the inner fender near the wheel well. SUVs might use the firewall or shock tower. The goal is a location where you can reach the filter without removing other parts and where the hoses won't rub against moving components.

Before drilling or bolting anything, trace the hose route from the engine to your chosen spot and check for obstacles. Make sure the location doesn't sit directly above the exhaust manifold or turbo—heat will degrade the hoses and housing over time. If you're unsure, look at photos of the same kit on similar vehicles online or ask the manufacturer where others typically mount it.

Remote filters versus factory-mounted filters: what changes

A remote filter runs cooler because it's away from engine heat, which can extend the life of the filter media slightly. The cooler oil also flows more freely, which some owners report improves cold-start performance in winter. You'll spend less time under the hood at each change—no removing air boxes, belts, or other components to reach the filter.

The trade-off is that you're adding hoses and connections, which means more potential leak points if fittings aren't tight or if hoses degrade. A remote housing also takes up space somewhere else on the vehicle, and if you ever need to remove it, you'll have to drain and disconnect the lines again. For most owners, the convenience outweighs these concerns, especially on vehicles with notoriously cramped filter locations.

Cost and whether a remote kit makes sense for your vehicle

Kits range from $150 to $500 depending on brand, vehicle type, and whether the filter is included. Truck-specific kits from established manufacturers run higher; generic kits are cheaper but may require more troubleshooting during installation. Labor at a shop adds $200 to $400. Over the life of the vehicle, you'll save time on oil changes, but the upfront cost is real.

A remote kit makes the most sense if your factory filter is genuinely difficult to reach, if you change your own oil regularly, or if you're building a performance vehicle and want the cooler running temperature. If your filter is reasonably accessible and you change oil once a year at a shop, the kit probably isn't worth the expense. If you're on the fence, ask a mechanic whether your specific vehicle's filter location is actually a pain point or just inconvenient.

Maintenance and troubleshooting after installation

After installation, check all hose connections at your first few oil changes to make sure nothing has loosened. Hoses can weep slightly if fittings aren't quite tight enough. If you see a small drip, try tightening the fitting a quarter turn with a wrench—don't force it. If it still leaks, the hose may be damaged or the fitting may be cross-threaded; you'll need to disconnect and reseat it.

Over time, hoses can crack or become brittle from heat or UV exposure, especially if they're routed near the exhaust. Inspect them during each oil change. If you see cracks, bulges, or soft spots, replace the hose before it fails. Most kits use standard SAE hose sizes, so replacements are inexpensive and available from any auto parts store. Keep the filter housing clean and free of oil buildup so you can spot leaks early.

Frequently Asked Questions

Can I install a remote oil filter kit myself if I've never done it before?

Yes, if you're comfortable working under a vehicle and following detailed instructions. Watch a video for your specific kit first to see the full process. If any step—like routing hoses or tightening fittings—feels uncertain, stop and take it to a shop. A leak from a loose fitting can damage your engine, so it's worth getting it right.

Will a remote oil filter kit void my vehicle's warranty?

It depends on your warranty terms and whether the installation causes a problem. If the kit itself fails and causes engine damage, the manufacturer may deny a claim. If you install it cleanly and it has no connection to an unrelated failure, most dealers won't care. Check your warranty paperwork or ask your dealer before installing.

Do I need a special oil filter for a remote kit?

No. The filter element is the same size and type as your factory filter—the difference is the housing it screws into. Some kits come with a filter; others don't. When you buy replacements, just match the part number to your vehicle, not to the remote housing.

What happens if a hose comes loose while I'm driving?

You'll lose oil pressure quickly and the engine will shut down or seize. This is why checking connections at every oil change matters. If a hose does come loose, you'll see oil under the vehicle and a low-pressure warning light. Stop when ready and don't restart the engine—tow it to a shop.

Can I use a remote oil filter kit on any vehicle?

Kits are designed for specific vehicles or engine types. A kit for a truck with a 5.7L V8 won't work on a sedan with a 2.0L four-cylinder because the oil flow rates and port sizes are different. Always confirm the kit matches your year, make, model, and engine before ordering.