The Nissan Rogue uses a cartridge-style oil filter that sits on top of the engine
Unlike older spin-on filters that screw onto the side of the engine, your Nissan Rogue has a cartridge filter housed in a plastic canister on the valve cover. This design is common on modern Nissans and means you replace the filter element itself rather than the whole unit. The filter sits directly above the engine, making it relatively straightforward to access without removing other components.
The exact location and filter type depend on your model year and engine size. Rogues from 2014 onward use this cartridge system, while older models may have different configurations. Knowing which generation you own matters because the filter size and replacement procedure vary slightly.
Key Takeaways
- Nissan Rogue oil filters are cartridge-style elements housed in a plastic canister on top of the engine, not spin-on filters that screw to the side.
- Filter part numbers vary by engine size and model year, so confirm your specific Rogue generation before ordering a replacement.
- Replacement takes 10 to 15 minutes and requires an oil filter wrench, a drain pan, and the correct replacement cartridge and O-ring kit.
- OEM Nissan filters cost between $8 and $15, while aftermarket options from Fram, Mobil, or Bosch typically run $5 to $12.
Finding the correct filter part number for your Rogue
The filter you need depends on your engine. Most Rogues use either a 2.5-liter four-cylinder or, in some years, a 1.6-liter turbocharged engine. The OEM Nissan part number for the 2.5L filter is 15208-JA00C or 15208-JA00B, depending on year. Turbocharged models use a different cartridge. Your VIN and model year will narrow this down when ready.
The easiest way to confirm is to call a Nissan dealership parts department with your VIN, or check your owner's manual under the maintenance schedule. Many auto parts stores (AutoZone, O'Reilly, NAPA) can also look up the correct filter by entering your year, make, and model. Do not guess on this step — installing the wrong filter can restrict oil flow or cause leaks.
What you need to replace the filter yourself
You will need an oil filter wrench (a cup-style wrench that fits the canister), a drain pan to catch spilled oil, a new filter cartridge, and a replacement O-ring kit. Nissan sells the O-ring kit separately — this is important because reusing the old O-ring can cause leaks. You will also need fresh oil to top up after the filter change, though the filter itself holds only a small amount.
The wrench is the one tool you cannot skip. A 74mm or 86mm filter wrench works on most Rogues, but confirm the size before buying. If you do not own one, borrowing from a friend or renting from an auto parts store costs far less than a professional oil change. A torque wrench is not necessary — hand-tight plus a quarter turn is the correct tightness for the canister cap.
Step-by-step replacement process
Start with a warm engine (not hot enough to burn you, but warm enough that oil flows easily). Locate the filter canister on top of the engine — it is a plastic housing about the size of a soda can. Place your drain pan underneath, then use the filter wrench to turn the canister cap counterclockwise. It will loosen and unscrew by hand once the wrench breaks it free.
Once the cap comes off, lift out the old filter cartridge and O-ring. Wipe the inside of the canister clean with a lint-free cloth or paper towel. Install the new O-ring (from the kit) onto the new filter cartridge, then insert the cartridge into the canister. Screw the cap back on hand-tight, then turn it another quarter turn with the wrench. Do not over-tighten — this is a common mistake that damages the cap threads.
Start the engine and let it run for 30 seconds, then check the oil level on the dipstick. Top up if needed. Check under the engine for leaks after a few minutes of running. If you see drips, the cap may not be tight enough or the O-ring may not be seated correctly — remove the cap and reseat the O-ring, then reinstall.
OEM versus aftermarket filter options
Nissan OEM filters (part numbers starting with 15208) cost $8 to $15 at a dealership and are may provide to fit. Aftermarket brands like Fram, Mobil 1, Bosch, and Purolator make filters for the Rogue that cost $5 to $12 and meet the same performance standards. Both OEM and quality aftermarket filters will protect your engine equally well if they meet Nissan's specifications.
The real difference is availability and warranty. A dealership will have the OEM part in stock, while aftermarket filters are easier to find at big-box auto parts stores. Some aftermarket brands offer longer warranties (up to 10,000 miles versus the standard 5,000), though this matters less if you change your filter on schedule. For most owners, a mid-range aftermarket filter from a known brand is the better value.
When to replace your Rogue's oil filter
Nissan recommends changing the oil filter every time you change the oil. For most Rogues, that is every 3,000 to 5,000 miles with conventional oil, or every 7,500 to 10,000 miles with synthetic oil. Check your owner's manual for the exact interval for your model year, as Nissan has adjusted these recommendations over time. Synthetic oil extends the interval, so using it means fewer filter changes per year.
If you drive in severe conditions — towing, frequent short trips, dusty environments, or extreme heat — Nissan recommends the shorter interval regardless of oil type. Changing the filter more often than recommended does no harm and costs very little, so erring on the side of caution is reasonable if you are unsure about your driving pattern.
Frequently Asked Questions
Can I change just the filter without changing the oil?
Technically yes, but Nissan does not recommend it. The filter and oil work together — old oil loses its ability to protect the engine, and a new filter in old oil defeats the purpose. If you must change the filter alone, do it only as a temporary measure between scheduled oil changes, not as a regular practice.
What happens if I install the wrong size filter?
A filter that is too small may not seal properly and cause oil leaks. One that is too large will not fit in the canister. Either way, you risk restricted oil flow or engine damage. Always confirm the part number before installation and do not assume two Rogues of the same year use the same filter.
Do I need to pre-fill the new filter with oil?
No. Nissan cartridge filters do not need to be pre-filled. straightforward install the dry cartridge with the new O-ring, screw the cap on, and start the engine. The oil pump will fill the filter when ready.
How tight should the canister cap be?
Hand-tight plus one quarter turn with the wrench is correct. Over-tightening strips the threads and makes removal difficult next time. Under-tightening causes leaks. If you are unsure, err slightly loose — you can always tighten it more if you see drips.
Can I reuse the old O-ring?
No. O-rings degrade with heat and oil exposure and lose their seal. Always install a new O-ring from the replacement kit. Reusing the old one is the most common cause of oil leaks after a filter change.