What a motorcycle oil change kit actually contains

A motorcycle oil change kit is a bundle of the items you need to drain old oil and install new oil in one purchase. Most kits include an oil filter, a crush washer or O-ring for the drain plug, and sometimes a small amount of fresh oil—though not always enough for a full change. The exact contents vary by kit and by motorcycle model, so you need to check what's in the box before you start work.

The oil filter is the main component. Motorcycle filters are smaller and shaped differently than car filters—some screw on like a car's, others slide into a cartridge housing on top of the engine. The crush washer or O-ring prevents leaks at the drain plug. Some kits skip the oil entirely and assume you'll buy it separately; others include a quart or two. Neither approach is wrong, but it changes what you still need to buy.

Key Takeaways

  • A motorcycle oil change kit typically includes the filter and drain plug washer, but you must verify the oil quantity is enough for your bike before you start.
  • You will need to buy fresh oil separately if the kit does not include it, and the correct weight and type depend on your motorcycle's manual, not the kit label.
  • Motorcycle filters vary by model—some thread on, others drop into a cartridge—so confirm your kit matches your bike's filter type before purchase.
  • You will also need an oil filter wrench, a drain pan, and a way to dispose of old oil; these are not usually in the kit.

Checking your motorcycle manual for the right oil amount and type

Your motorcycle's owner manual tells you exactly how much oil the engine holds and what weight and type to use. This is not optional information—using the wrong oil weight or type can damage the engine or cause it to run poorly. The manual also tells you whether your bike needs conventional, synthetic, or a blend, and whether it has a separate transmission that needs its own oil.

Many motorcycles hold between 2.5 and 4 quarts of oil, but some hold less and some hold more. If your kit includes oil, check the label to see how much is in the box. If it says one quart and your bike needs four, you will need to buy three more quarts of the same brand and weight. If the kit includes no oil at all, you will buy the full amount separately. Write down the weight and type from your manual before you go to the parts store—this prevents buying the wrong thing.

Tools and supplies the kit does not include

Beyond what is in the box, you will need an oil filter wrench to remove the old filter. This wrench grips the filter and turns it off without crushing it. The size depends on your filter diameter, so bring your old filter to the store or look up the size online. You will also need a drain pan large enough to hold all your old oil without spilling—a five-quart pan is standard and costs under ten dollars.

You will need a way to dispose of the old oil. Most auto parts stores and many gas stations accept used oil for free, and some will take the old filter too. Call ahead to confirm they accept motorcycle oil and ask whether they want the oil in a sealed container or a jug. Do not pour old oil down a drain or into the ground—it is illegal in most places and harms the environment.

A socket wrench or box wrench sized to your drain plug is also necessary. Drain plugs vary by bike, but most are between 14 and 17 millimeters. Check your manual or look at the plug itself to find the size. You may also want rags or paper towels to wipe spilled oil and to clean around the filter housing before you install the new filter.

Comparing kits: what changes between brands and models

Some kits are sold by motorcycle manufacturers and matched to specific models—a Honda kit for a CB500, for example. These kits are more likely to include the exact filter your bike needs and the correct oil weight. Aftermarket kits sold by parts retailers are often generic and may not include oil at all, or may include oil that is not the right weight for your bike.

Price varies widely. A basic kit with just a filter and crush washer might cost twelve to twenty dollars. A kit that includes oil, filter, and washer can run thirty to sixty dollars depending on the oil brand and quantity. Buying the items separately is sometimes cheaper, especially if you already have a drain pan and filter wrench at home. Compare the total cost of a kit against buying a filter, oil, and washer individually before you decide.

Confirming your kit matches your motorcycle's filter type

Before you buy or open a kit, confirm that the filter type inside matches what your motorcycle uses. Some bikes have a spin-on filter that threads onto the engine like a car's filter. Others have a cartridge filter that sits inside a housing on top of the engine—you remove a bolt, lift off the housing, and drop the filter out. A few older or smaller bikes use a screen-type filter that you clean rather than replace.

Check your owner manual or look at your current filter to see which type you have. If you buy a kit with the wrong filter type, you will not be able to install it and will have to return it. Manufacturer-specific kits are less likely to have this problem, but generic kits sometimes mix filter types in the same product line.

What to do if your kit is missing something or has the wrong oil

If you open the kit and find it does not include oil, or includes the wrong amount or weight, you have options. If you have not started the oil change yet, you can return the kit and buy a different one, or buy the missing oil separately. If you have already drained the old oil, you will need to buy the correct oil before you can refill the engine—do not start the engine without oil in it.

If the kit includes oil but the weight does not match your manual, do not use it. Return it or set it aside and buy the correct weight. Using the wrong oil weight can cause poor performance, increased wear, or engine damage over time. The few dollars saved by using the wrong oil is not worth the risk.

Frequently Asked Questions

Can I use a car oil filter on my motorcycle?

No. Motorcycle filters are smaller and shaped differently, and they thread on or fit into housings designed for motorcycle filters. Using a car filter will not fit your bike's filter housing and can cause leaks or damage. Always use a filter matched to your motorcycle model.

Do I need to buy a new crush washer every time I change the oil?

Yes. The crush washer is a soft metal ring that seals the drain plug. It flattens when you tighten the plug and cannot seal again if you reuse it. Most kits include a new washer, but if yours does not, buy one separately—they cost less than a dollar.

What if the kit includes more oil than my motorcycle needs?

Use only the amount your manual specifies. Extra oil in the engine can damage the engine or cause it to smoke. Store the leftover oil in a sealed container in a cool place and use it for the next oil change, or dispose of it at a parts store or gas station that accepts used oil.

How do I know if a kit is for my specific motorcycle?

Check the kit label or product description for your motorcycle's year, make, and model. Manufacturer kits usually list the models they fit. Generic kits may not specify, so look up your bike's filter size and oil weight in your manual and compare them to what the kit includes before you buy.

Can I mix different oil brands if my kit does not include enough oil?

Yes, as long as the weight and type match what your manual requires. Mixing brands is safe if they are both the same weight—for example, two different brands of 10W-40 synthetic. Do not mix conventional and synthetic oil unless your manual says it is safe for your bike.