The Motorcraft FL-500S is Ford's spin-on oil filter for mid-size and full-size Ford trucks and SUVs built between 1992 and 2010

The Motorcraft FL-500S is a spin-on filter — the kind you twist off by hand and replace during an oil change. Ford designed it specifically for engines in F-150, F-250, and Expedition models from the 1990s through early 2000s. It fits engines ranging from 4.6L to 7.3L, depending on the year and model you own.

If you own a Ford truck or SUV from that era, checking your owner's manual or the filter canister itself will tell you whether this is the right part. The part number is printed on the filter itself, so you can match it before you buy. Motorcraft is Ford's own parts brand, so this filter meets Ford's original specifications — it is not an aftermarket equivalent.

The FL-500S has been out of production for years, but you can still find it through Ford dealers, online retailers, and some auto parts stores that stock older inventory. Prices typically run between $8 and $15 per filter, depending on the seller.

Key Takeaways

  • The Motorcraft FL-500S fits Ford F-150, F-250, and Expedition models from 1992 to 2010, but you should verify the part number in your owner's manual before ordering.
  • This is a spin-on filter that you remove by hand and replace yourself or have a technician replace during an oil change.
  • The FL-500S is discontinued but still available through Ford dealers and online retailers, usually for $8 to $15 per filter.
  • If you cannot find the FL-500S, Motorcraft and other manufacturers make current-production filters that fit the same engines, though you will need to confirm the part number.

How to confirm the FL-500S is the right filter for your truck

The easiest way is to look at your owner's manual — it will list the correct filter part number for your engine and model year. If you do not have the manual, check the filter canister itself if you have already removed the old one. The part number is stamped or printed on the side of the filter.

You can also call a Ford dealer with your vehicle identification number (VIN) and ask them to confirm which filter your truck needs. They will look it up in Ford's system and tell you the correct part number. This takes five minutes and costs nothing.

Do not assume all Ford trucks from that era use the same filter — engine size, year, and model all matter. A 1995 F-150 with a 4.6L engine may use a different filter than a 1998 F-250 with a 7.3L diesel, even though both are Fords.

What to do if you cannot find the FL-500S in stock

Since the FL-500S is no longer in production, stock can be spotty. If a retailer does not have it, you have two options: order it online and wait for delivery, or find a current-production filter that fits your engine.

Motorcraft still makes filters for those older Ford engines under different part numbers. An auto parts store employee or Ford dealer can cross-reference the FL-500S to a current Motorcraft filter that will work in your truck. This usually takes a phone call or a quick online search.

Other manufacturers like Fram, ACDelco, and Bosch also make filters that fit those engines. The key is matching the filter size and thread type, not the brand name. Any filter with the correct specifications will work — Motorcraft is not required, though it is the original Ford part.

Spin-on filters versus cartridge filters

The FL-500S is a spin-on filter, which means the entire filter element and housing come off as one piece. You unscrew it by hand, throw it away, and screw a new one on. This is the most common type of oil filter on consumer trucks and SUVs.

Some Ford trucks, especially diesels, use cartridge filters instead — a replaceable element that sits inside a housing that stays on the engine. If your truck has a cartridge filter, the FL-500S will not fit, and you will need a different part number. Your owner's manual or a dealer can tell you which type your truck has.

Spin-on filters are simpler to replace yourself because you do not need to open a housing or deal with an O-ring seal. You just twist, drain, and install the new one.

How often to replace the FL-500S

Ford's recommended oil change interval for trucks using the FL-500S was typically 5,000 miles or six months, whichever came first. Newer Ford trucks have moved to 10,000-mile intervals, but older trucks with this filter usually follow the 5,000-mile schedule.

If you drive in severe conditions — towing, dusty roads, or frequent short trips — Ford recommended changing the oil and filter more often, sometimes every 3,000 miles. Check your owner's manual for the specific interval for your truck and driving habits.

The filter itself does not wear out on a schedule — it clogs as it traps dirt and metal particles from the engine. Changing it at the recommended interval keeps the engine from working harder to push oil through a dirty filter.

Motorcraft versus aftermarket filters for older Fords

Motorcraft filters meet Ford's original specifications and are made to the same standards as the filters that came on your truck from the factory. They cost a few dollars more than some aftermarket brands but are the safest choice if you want to match the original part exactly.

Aftermarket filters from Fram, ACDelco, Bosch, and others are usually cheaper and work fine in older trucks. The difference is usually not in performance but in build quality and how long the filter media lasts before it clogs. Motorcraft filters tend to last the full interval without clogging early, while some cheaper aftermarket filters may clog faster in dusty conditions.

For a truck that is 15 to 30 years old, the choice between Motorcraft and a quality aftermarket filter matters less than changing the filter on schedule. A $10 Fram filter changed every 5,000 miles will protect your engine better than a $15 Motorcraft filter changed every 10,000 miles.

Where to buy the Motorcraft FL-500S

Ford dealers stock the FL-500S or can order it for you, usually within one to three business days. Prices at dealers are typically higher than online retailers, but you get the may provide that the part is genuine and correct for your truck.

Online retailers like RockAuto, Amazon, and eBay often have the FL-500S in stock at lower prices, with shipping to your home or a local pickup point. Shipping usually takes three to seven days depending on the seller and your location.

Local auto parts stores like AutoZone and O'Reilly may have the FL-500S in stock or can order it. Call ahead to check availability before you drive to the store.

Frequently Asked Questions

Can I use a different Motorcraft filter if the FL-500S is not available?

Yes, if you confirm the part number with a Ford dealer or your owner's manual. Motorcraft makes several filters for Ford trucks from that era, and a dealer can tell you which one is a direct replacement for the FL-500S on your specific engine and model year.

What is the difference between the FL-500S and the FL-500?

The FL-500S is the spin-on version. Ford also made a cartridge-style filter called the FL-500 for some engines. They are not interchangeable — you need to know which type your truck has. Check your owner's manual or the old filter you removed.

How do I know if my filter is clogged?

A clogged filter usually triggers the oil pressure warning light on your dashboard, which looks like an oil can. If the light comes on while driving, stop and check your oil level first — low oil is the most common cause. If the level is normal, the filter may be clogged and needs replacement when ready.

Can I reuse the FL-500S if I just rinse it out?

No. Oil filters are designed to be replaced, not cleaned and reused. The filter media breaks down and cannot trap particles effectively once it has been used. Reusing a filter risks engine damage from unfiltered oil.

Is the FL-500S compatible with synthetic oil?

Yes. The FL-500S works with conventional, synthetic blend, and full synthetic oils. The type of oil you use does not change which filter you need, only how often you change it — synthetic oil typically lasts longer between changes.