Finding your Mopar oil filter starts with your vehicle's year, make, model, and engine size
A Mopar oil filter is the genuine filter made by Chrysler for Chrysler, Dodge, Jeep, and Ram vehicles. The right filter depends on what engine you have, not just the brand of your car. A 2015 Dodge Charger with a 3.6-liter V6 needs a different filter than a 2015 Charger with a 5.7-liter V8, even though they are the same year and model.
The fastest way to find your filter is to use the Mopar Parts Locator on the official Mopar website, or to call a Chrysler, Dodge, Jeep, or Ram dealership parts department with your vehicle identification number (VIN). Both will give you the exact part number in seconds. If you already know your engine size and year, you can also cross-reference that information against Mopar's published filter charts or ask an auto parts store to look it up in their system.
Key Takeaways
- The Mopar Parts Locator on mopar.com lets you enter your VIN and see the correct filter part number when ready.
- Your vehicle's engine size matters more than the model year—two engines in the same car model may need different filters.
- A dealership parts department can look up your filter by VIN over the phone and often has stock on hand.
- The correct Mopar filter part number is printed on the filter itself and in your owner's manual under maintenance schedules.
Using the Mopar Parts Locator website
Go to mopar.com and select "Parts Locator" from the main menu. You will be asked to enter your vehicle's VIN, which is a 17-character code found on your driver's side dashboard (visible through the windshield) or on your vehicle registration and insurance documents. The locator will pull up your exact engine configuration and show you the correct oil filter part number.
Once you have the part number, you can note it down and take it to any auto parts store, or order it online from Mopar's website, Amazon, eBay, or other retailers. Mopar filters are widely stocked because they fit Chrysler Group vehicles, which are common on the road. Prices typically range from $8 to $15 per filter, though this varies by retailer and whether you are buying a single filter or a multi-pack.
Calling a dealership parts department
If you do not want to look it up yourself, a Chrysler, Dodge, Jeep, or Ram dealership parts department will do it for you over the phone. Have your VIN ready. The parts staff will tell you the correct filter part number, the current price at that dealership, and whether they have it in stock. Many dealerships will hold a filter for you for a few days if you ask.
Dealership filters are usually more expensive than retail auto parts stores—sometimes by $3 to $5—but you are may provide to get the correct part and you support the service department that may work on your vehicle later. Some dealerships offer loyalty discounts or bundled pricing if you buy filters in bulk for scheduled maintenance.
Finding the filter information in your owner's manual
Your vehicle's owner's manual contains a maintenance schedule that lists the correct oil filter part number. Look for the section titled "Maintenance Schedule," "Service Intervals," or "Fluid Capacities." The filter part number will be listed alongside the oil capacity and the recommended oil change interval (usually every 3,000 to 10,000 miles, depending on your model year and engine).
If you have lost your physical manual, you can read a PDF version from mopar.com by entering your VIN, or search for your vehicle's manual on sites like manualzz.com or the manufacturer's archive. The manual is free to view online. This method works well if you are planning ahead and want to have the part number before you need the filter.
Understanding Mopar filter part numbers and cross-references
Mopar oil filter part numbers follow a pattern: they usually start with "68" or "05" followed by six digits (for example, 68065139 or 05281090). The part number is printed on the filter box and on the filter itself. If you are shopping at an auto parts store and the staff member is unsure whether a filter is correct, ask them to look up the part number in their system—most stores can cross-reference Mopar numbers to their own inventory codes.
Some aftermarket filters (made by Fram, Mobil, Purolator, or others) are designed to fit Chrysler vehicles and may be cheaper than Mopar filters. However, using the genuine Mopar filter ensures the filter housing, thread size, and bypass valve are calibrated for your specific engine. If you choose an aftermarket filter, verify that the auto parts store staff have confirmed it fits your exact engine before you buy it.
What happens if you use the wrong oil filter
Using the wrong filter can cause problems that range from minor to serious. If the filter is too small or has the wrong thread size, it may not seal properly and oil can leak out during operation. If the filter's bypass valve opens at the wrong pressure, dirty oil can circulate through your engine instead of being filtered, which speeds up wear on bearings and piston rings.
In rare cases, an incompatible filter can restrict oil flow if the internal design does not match your engine's oil passages, which can cause the oil pressure warning light to come on. This is why dealerships and experienced technicians always verify the part number before installation. Taking 30 seconds to confirm you have the right filter prevents a costly engine repair later.
Frequently Asked Questions
Can I use a non-Mopar filter in my Chrysler vehicle?
Yes, many aftermarket filters fit Chrysler vehicles and meet industry standards. However, you must confirm the part number matches your specific engine before you buy it. Mopar filters are engineered for your exact engine and are the safest choice if you want to avoid any guesswork.
Where is my VIN located?
Your VIN is on the driver's side dashboard, visible through the windshield at the base of the windshield. It is also printed on your vehicle registration, insurance card, and title. It is a 17-character code that includes letters and numbers.
Do I need to change my oil filter every time I change the oil?
Yes, the filter should be replaced every time you change the oil. A used filter cannot be cleaned and reused—it is designed to be discarded after one oil change cycle. Reusing a filter defeats the purpose of filtering and allows contaminants to circulate through your engine.
What if the auto parts store says my filter is out of stock?
Call a nearby dealership parts department or another auto parts chain to check their stock. Most Mopar filters are common items and are usually in stock somewhere in your area. If you are in a rural location, you can order online and have it shipped to your home or to the store for pickup within a few days.
Is there a difference between Mopar filters for different Chrysler brands?
Yes. A Dodge filter is different from a Jeep filter, and both are different from a Chrysler or Ram filter, even if the engines are similar. Always use the filter specified for your exact vehicle brand and model. The Mopar Parts Locator will show you the correct one for your VIN.