The right oil filter for your Honda CR-V depends on your model year and engine type
Honda CR-V models use one of two filter types: a cartridge filter that sits inside a plastic housing on top of the engine, or a spin-on filter that screws onto the engine block. Most CR-Vs from 2007 onward use the cartridge style. The exact part number matters because using the wrong filter can restrict oil flow or cause leaks. Your owner's manual lists the correct filter for your specific year and engine, and that manual is the most reliable source — not the year alone.
If you do not have your manual, you can find the filter type and part number by entering your VIN (vehicle identification number) into Honda's parts lookup tool on their website, or by calling a Honda dealership with your VIN. Auto parts stores like AutoZone and O'Reilly also cross-reference by VIN when you visit or call. The filter cost typically ranges from $8 to $15 for OEM (original equipment manufacturer) Honda filters, with aftermarket options sometimes cheaper.
Key Takeaways
- Most Honda CR-Vs from 2007 onward use a cartridge oil filter housed in a plastic cap on top of the engine, not a spin-on filter.
- Your VIN is the fastest way to confirm the exact filter part number, and you can look it up on Honda's website or call any Honda dealership.
- OEM Honda filters cost $8 to $15 and are available at dealerships, auto parts chains, and online retailers.
- Using the wrong filter can restrict oil flow or cause leaks, so matching the part number to your model year and engine is essential.
Cartridge filters versus spin-on filters in CR-V models
The cartridge filter design became standard on CR-Vs starting with the 2007 model year. This filter sits inside a cylindrical plastic housing mounted on top of the engine. To change it, you unscrew the housing cap, pull out the old filter element, and drop in a new one. The housing itself stays in place. This design is cleaner than spin-on filters because the old filter does not drip oil onto your hands or the engine bay when you remove it.
If you own an older CR-V (2006 or earlier), your vehicle likely has a spin-on filter that screws directly onto the engine block. These filters are less common on newer CR-Vs but are still straightforward to replace — you unscrew the old one by hand and screw on the new one. The key difference is that spin-on filters contain all the filter media and housing in one unit, whereas cartridge filters separate the element from the housing.
Knowing which type you have matters because the part numbers are completely different. A cartridge filter for a 2015 CR-V will not fit a 2005 CR-V, and ordering the wrong type wastes money and time.
How to find your CR-V's correct filter part number
The most direct method is your owner's manual. Open it to the maintenance section, and you will find the filter part number listed alongside the oil capacity and change interval. If you do not have a physical manual, Honda publishes digital versions on their website that you can search by model year.
If you do not want to search a manual, enter your VIN into Honda's official parts lookup at parts.honda.com. You will need to select your model year and engine type, then navigate to the oil filter section. The system will display the correct part number and a photo of the filter so you can confirm it matches what you expect.
A third option is to call or visit a Honda dealership parts department with your VIN. They can tell you the part number over the phone and often have filters in stock. Auto parts chains like AutoZone, O'Reilly, and NAPA also accept VIN lookups in-store or online and will cross-reference to their own inventory, sometimes showing you compatible aftermarket options alongside the OEM part.
OEM Honda filters versus aftermarket alternatives
OEM Honda filters are manufactured to Honda's specifications and carry Honda's part number. For a CR-V, these typically cost $10 to $15 per filter. They are available at Honda dealerships, online retailers like Amazon and RockAuto, and some auto parts chains that stock OEM parts.
Aftermarket filters from brands like Fram, Mobil 1, and Bosch are usually cheaper — often $6 to $10 — and fit CR-Vs just as well if you match the part number correctly. The trade-off is that OEM filters have been tested specifically on your vehicle model, while aftermarket filters meet general industry standards. For most owners, either works fine. The more important factor is changing the filter on schedule: every 3,000 to 10,000 miles depending on your CR-V's year and whether you use synthetic or conventional oil.
If you are unsure whether an aftermarket filter will work, ask the auto parts store to confirm the part number matches your VIN before you buy. Do not assume that a filter labeled "fits CR-V" will work for your specific year — the part number is what matters.
Where to buy Honda CR-V oil filters
Honda dealerships stock OEM filters and can order them if they do not have your specific part in stock. Dealership prices are typically higher than other retailers, but you get the certainty that the part is correct and often the option to have the dealership install it during your service appointment.
Online retailers like Amazon, RockAuto, and Walmart offer both OEM and aftermarket filters with home delivery. Prices are often lower than dealerships, and you can read customer reviews to see how a filter performed on other CR-Vs. Shipping times vary — RockAuto and Amazon Prime can deliver within days, while some sellers take longer.
Local auto parts chains (AutoZone, O'Reilly, NAPA, Advance Auto Parts) stock filters in-store and can look up the correct part by VIN while you wait. Many offer same-day pickup if you order online. These stores also sell the tools and supplies you need to change the filter yourself, like an oil filter wrench and a drain pan.
What to check before you buy
Confirm your VIN and model year before ordering. The VIN is printed on your vehicle registration, insurance card, and the dashboard near the windshield. Write it down or take a photo so you have it when you contact a parts supplier.
Check the filter housing on your CR-V to see whether it is a cartridge or spin-on type. If you open the hood and see a cylindrical plastic cap on top of the engine with a large bolt in the center, you have a cartridge filter. If you see a metal canister screwed directly onto the engine block, you have a spin-on filter. This visual check takes 30 seconds and prevents ordering the wrong type.
When you receive the filter, compare the part number on the box to the part number in your manual or the parts lookup result. The numbers should match exactly. If they do not, contact the seller before you install it.
Frequently Asked Questions
Can I use any oil filter that says it fits a CR-V?
No. Many filters are labeled as fitting CR-Vs, but they may only fit certain model years or engine types. Always match the part number to your specific VIN and model year. A filter that fits a 2012 CR-V may not fit a 2018 CR-V, even though both are CR-Vs.
What happens if I install the wrong filter?
An incorrect filter can restrict oil flow to the engine, cause leaks at the connection point, or not seal properly. Any of these problems can damage your engine over time. If you realize you installed the wrong filter, drain the oil, remove the incorrect filter, and install the correct one when ready.
Do I need to replace the rubber gasket on a cartridge filter?
Yes. The rubber gasket sits between the filter element and the housing cap. When you replace the filter element, always replace the gasket as well. Most replacement filter elements come with a new gasket included. If yours does not, buy one separately — it costs $2 to $5.
How often should I change my CR-V's oil filter?
Most CR-Vs require an oil filter change every 3,000 to 10,000 miles, depending on your model year and whether you use synthetic or conventional oil. Check your owner's manual for the exact interval for your vehicle. Synthetic oil typically allows longer intervals than conventional oil.
Can I reuse the plastic housing on a cartridge filter?
Yes. The plastic housing stays on your engine permanently. You only replace the filter element inside it and the rubber gasket. The housing itself rarely needs replacement unless it cracks or the threads become stripped.