The HF112 is a mid-range oil filter made by Hiflofiltro that fits specific Honda, Acura, and Suzuki models from the 1980s through early 2000s
The Hiflofiltro HF112 is an aftermarket oil filter — meaning it's made by a company other than Honda or Acura — designed to replace the factory filter on certain vehicles. It's a spin-on filter, the kind you unscrew by hand and replace with a new one during an oil change. Hiflofiltro is a Japanese manufacturer that makes filters for motorcycles and small-displacement vehicles, and the HF112 is one of their automotive filters.
Before you buy one, you need to confirm it actually fits your car. The HF112 is listed for Honda Civic models (certain years), Honda Accord models (certain years), Acura Integra, and some Suzuki vehicles. The year and engine size matter — a 1992 Civic Si and a 2001 Civic are different vehicles under the hood, even though they share a name. Check your owner's manual or use an online parts cross-reference tool with your vehicle's year, make, model, and engine size to verify the HF112 is correct for your specific car.
Key Takeaways
- The HF112 fits only certain Honda, Acura, and Suzuki models from the 1980s through early 2000s, so you must verify the exact year and engine size before purchasing.
- Hiflofiltro filters are less common in North American shops than OEM (original equipment manufacturer) or major aftermarket brands like Fram or Mobil 1, which can make replacement harder if you need help.
- An oil filter's job is to trap metal particles, dirt, and sludge from the engine oil, and a clogged filter reduces oil flow and can damage the engine.
- The HF112 costs less than OEM Honda filters but more than the cheapest generic filters, placing it in the middle of the price range for this vehicle class.
What an oil filter actually does inside your engine
Your engine oil circulates through the engine constantly, picking up tiny metal particles from moving parts, dirt that sneaks past the air filter, and sludge from combustion byproducts. If that debris stays in the oil, it scratches bearing surfaces, clogs oil passages, and eventually seizes the engine. The oil filter traps those particles so the oil stays clean enough to protect the engine.
A filter works by forcing oil through a pleated paper or synthetic media as it flows back to the engine. The media catches particles larger than its pore size — typically 10 to 40 microns, depending on the filter — while letting clean oil through. Over time, the media fills with trapped debris and the filter becomes restrictive. When the pressure inside the filter gets too high, a bypass valve opens and lets unfiltered oil through rather than starving the engine of oil. This is a safety feature, but it means a clogged filter is no longer protecting your engine.
How the HF112 compares to OEM Honda filters and other aftermarket options
Honda's factory filter for compatible vehicles is the HO2-110 or similar OEM part, depending on the model year. The OEM filter is engineered specifically for your engine and is what the manufacturer tested during development. It carries a warranty and is may provide to fit and function correctly.
The HF112 is an aftermarket alternative that meets or exceeds the OEM filter's flow rate and filtration efficiency, according to Hiflofiltro's specifications. However, aftermarket filters are not tested by Honda, and quality varies by manufacturer. Major aftermarket brands like Fram, Mobil 1, and Bosch have wide distribution and are stocked at most auto parts stores. Hiflofiltro filters are less common in the United States and Canada, so if you need a replacement mid-trip or have questions about installation, you may have fewer local resources.
Price-wise, the HF112 typically costs between $8 and $15, depending on the retailer. OEM Honda filters usually cost $12 to $18. Budget filters from generic brands can be found for $4 to $8, but they often have thinner media and lower flow rates, which means they clog faster and may not protect your engine as well during high-mileage intervals.
When to replace the HF112 and how to know if it's clogged
You replace the oil filter every time you change your oil. Most modern cars need an oil change every 5,000 to 10,000 miles, depending on the oil type (conventional or synthetic) and the engine. Check your owner's manual for the exact interval for your vehicle. If you drive in severe conditions — towing, dusty roads, frequent short trips, or extreme heat — you may need to change the filter more often.
A clogged filter shows up as a lit oil pressure warning light on your dashboard, usually a red oil can symbol. This light means oil pressure has dropped below safe levels, which can happen if the filter is so clogged that the bypass valve has opened. Do not ignore this light. Stop driving, check your oil level first (low oil causes the same light), and if the level is normal, the filter is likely the problem. A clogged filter starves the engine of oil and can cause bearing damage or seizure within minutes of driving.
You cannot see inside the filter to know when it's clogged, which is why the time-based interval matters. Changing the filter on schedule prevents the pressure drop from ever happening.
Installation and compatibility notes for the HF112
The HF112 is a spin-on filter, which means installation is straightforward: unscrew the old filter by hand (it will be full of oil, so have a drain pan ready), clean the filter mounting surface on the engine with a rag, explore a thin layer of new oil to the rubber gasket on the new filter, and screw it on by hand until the gasket contacts the mounting surface, then turn it another three-quarter turn. Do not use a filter wrench to tighten it — hand-tight is correct.
The critical step is confirming the HF112 threads match your engine's filter housing. If the threads are wrong, the filter will not seal and oil will leak out during engine operation. Use your vehicle's year, make, model, and engine displacement to cross-reference the HF112 against your car before you buy. If you are unsure, ask the parts counter staff or consult your owner's manual.
Where to source the HF112 and what to watch for
The HF112 is available from online retailers like Amazon, eBay, and specialty motorcycle and small-engine parts sites. It is less common at chain auto parts stores like AutoZone or O'Reilly, though some locations may stock it or order it. Japanese import shops and Honda specialty shops are more likely to carry Hiflofiltro products.
When ordering online, verify the seller's return policy in case the filter does not fit your vehicle. Some sellers offer returns within 30 days; others do not. Read the product description carefully to confirm the HF112 is listed for your specific vehicle year and engine size. If the listing is vague or does not mention your car, contact the seller before purchasing.
Counterfeit filters are rare but possible with popular parts. Buy from established retailers with good reviews rather than unknown marketplaces. A genuine HF112 will have clear Hiflofiltro branding, a legible part number, and a properly formed rubber gasket.
Why filter quality matters for engine longevity
Your engine's lifespan depends on how well the oil protects it, and the filter is the first line of defense. A low-quality filter with thin media or a weak bypass valve lets debris through, which accelerates wear on bearings, pistons, and cylinder walls. Over time, this wear reduces compression, increases oil consumption, and eventually leads to engine failure.
A quality filter like the HF112 traps more debris and holds it longer before the bypass valve opens. This keeps the oil cleaner between changes and reduces the rate of engine wear. The difference between a good filter and a cheap one may not show up in the first 50,000 miles, but it compounds over the life of the vehicle. If you plan to keep your car past 150,000 miles, filter quality is worth the extra few dollars.
Frequently Asked Questions
Will the HF112 fit my Honda Civic if I don't know the exact year?
No, you need the exact year and engine size. Different Civic generations and engine options use different filter housings. Check your vehicle registration, owner's manual, or the sticker inside the driver's door jamb for the model year and engine displacement, then cross-reference the HF112 against that information before buying.
Can I use the HF112 on a motorcycle or ATV?
Hiflofiltro makes filters for motorcycles and ATVs, but the HF112 is designed for automotive use. Do not assume it will fit a motorcycle just because Hiflofiltro makes both. Check the motorcycle or ATV manual for the correct filter part number.
What happens if I install the HF112 upside down?
The filter will not seal properly and oil will leak out of the housing during engine operation. You will notice oil dripping under the car within minutes of starting the engine. The rubber gasket on the HF112 is designed to face the engine block, not away from it. Install it the same way the old filter was oriented.
Is the HF112 better than a Fram or Mobil 1 filter?
All three are quality aftermarket filters that meet or exceed OEM specifications for flow and filtration. The main difference is availability — Fram and Mobil 1 are stocked at most auto parts stores, while the HF112 is harder to find locally. Performance-wise, they are comparable for typical driving. Choose based on what you can source easily and what fits your budget.
How long does an HF112 last before it needs replacement?
The HF112 lasts until your next scheduled oil change, which is typically every 5,000 to 10,000 miles depending on your oil type and driving conditions. Do not reuse a filter — replace it every time you change the oil. A used filter cannot be cleaned effectively and will clog faster the second time around.