How to match a Briggs and Stratton oil filter to your engine

The fastest way to find the correct oil filter is to look up your engine's model number on the Briggs and Stratton website or in your owner's manual, then cross-reference it to the filter part number listed there. Briggs and Stratton publishes official cross-reference charts that match engine models directly to filter part numbers — this is more reliable than trying to match by engine size or type alone, because the same displacement engine can use different filters depending on the year and specific model variant.

If you have lost your manual or cannot locate the model number on your engine, you can also bring the engine itself to a small-engine dealer or an auto parts store that stocks Briggs and Stratton filters. They can identify the engine visually and pull the correct filter from their system. Many Briggs and Stratton dealers keep cross-reference books on hand for this reason.

Key Takeaways

  • Your engine's model number is the most reliable way to find the correct filter — it appears on a label or stamped into the engine block.
  • Briggs and Stratton publishes official cross-reference charts on their website and in owner's manuals that match model numbers to filter part numbers.
  • Common aftermarket filters like Fram, Kohler, and Wix publish their own cross-reference charts, but always verify against the Briggs and Stratton official list first.
  • If you cannot locate your model number, a small-engine dealer or auto parts store can identify your engine and provide the correct filter part number.

Where to find your Briggs and Stratton engine model number

The model number is usually stamped or printed on a label attached to the engine block, most often on the side or back of the engine near the fuel tank or air filter housing. On older engines, the label may be faded or partially worn away. Look for a series of numbers that typically includes the engine displacement (like 190cc or 350cc) and a model code.

Write down the complete model number exactly as it appears — do not abbreviate or guess at worn digits. You will need this number to search the Briggs and Stratton cross-reference database or to ask a dealer for help. If the label is completely illegible, take a clear photo of the engine from multiple angles and bring it to a dealer; they can often identify the engine from the design and any remaining visible markings.

Using the official Briggs and Stratton cross-reference

Briggs and Stratton maintains a searchable parts database on their website (briggsandstratton.com) where you can enter your model number and see the correct oil filter part number, along with other maintenance parts like spark plugs and air filters. The database also shows you the filter's specifications — the thread size, bypass valve rating, and whether it is a spin-on or cartridge style.

Your owner's manual also contains a cross-reference table in the maintenance section. If you do not have the physical manual, you can read a PDF version from the Briggs and Stratton website by entering your model number. The manual's cross-reference is identical to the online database, so either source will give you the same answer.

Aftermarket filter cross-references and compatibility

Fram, Wix, Kohler, and other aftermarket manufacturers publish their own cross-reference charts that list Briggs and Stratton model numbers alongside their equivalent filter part numbers. These charts are usually available on the manufacturer's website or printed on the filter packaging. Aftermarket filters are often less expensive than genuine Briggs and Stratton filters and work reliably in most cases, but you should always verify the cross-reference against the official Briggs and Stratton specification first.

The reason for verification is that an aftermarket filter may be listed as compatible with your engine model, but the thread size or bypass valve rating might differ slightly from the original specification. A filter with the wrong thread size will not fit, and a filter with an incorrect bypass valve rating can allow unfiltered oil to circulate if the filter clogs. Check the specifications on both the Briggs and Stratton manual and the aftermarket filter packaging to confirm they match before you buy.

Spin-on versus cartridge filters and which your engine uses

Briggs and Stratton engines use one of two filter styles: spin-on filters, which screw onto a threaded port on the engine and are replaced as a complete unit, or cartridge filters, which slide into a housing and require you to replace only the filter element while reusing the housing. Your model number and owner's manual will tell you which style your engine has.

Spin-on filters are more common on larger engines and are easier to change — you straightforward unscrew the old filter and screw on the new one. Cartridge filters are typical on smaller engines and require you to open the housing, remove the old element, and install a new one. The two styles are not interchangeable, so you must use the correct type for your engine. If you buy the wrong style by mistake, it will not fit at all.

What to do if you cannot find your model number

If the model number label is missing or completely illegible, take the engine to a Briggs and Stratton authorized dealer or a local small-engine repair shop. Bring the equipment the engine powers (lawn mower, generator, pressure washer, etc.) if possible, because the dealer can cross-reference the equipment model to the engine model. Many dealers keep cross-reference books and can identify engines by sight alone.

You can also contact Briggs and Stratton customer service directly with a photo of your engine and a description of the equipment it powers. They may be able to narrow down the model based on the engine's appearance and the year and type of equipment. This process is slower than looking up the model number yourself, but it is a reliable fallback if other options are not available.

Common mistakes when matching filters

The most common error is assuming that two engines of the same displacement use the same filter. A 190cc Briggs and Stratton from 2015 may use a different filter than a 190cc model from 2010, even though they are the same size. Always use the model number, not just the displacement, to find the correct filter.

Another mistake is buying a filter based on what fits another piece of equipment you own. Just because a filter works on your neighbor's mower does not mean it will work on yours, even if the mowers look similar. The only reliable source is your own engine's model number and the official cross-reference.

Frequently Asked Questions

Can I use a different brand of oil filter if it is the same size?

Size alone is not enough — the thread size, bypass valve rating, and filter element material all matter. An aftermarket filter may physically fit but allow unfiltered oil to circulate if the bypass valve is rated differently. Always check the specifications against your owner's manual before substituting brands.

What if the cross-reference shows multiple filter options for my model?

Briggs and Stratton sometimes lists more than one compatible filter for a single engine model, usually because the filter design was updated or multiple suppliers provide equivalent parts. Any filter listed in the official cross-reference for your model number is correct. Choose based on price and availability.

Do I need to use a genuine Briggs and Stratton filter or can I always use an aftermarket one?

Aftermarket filters that match your engine's specifications work reliably and are often cheaper. However, always verify the cross-reference and specifications first. Genuine Briggs and Stratton filters are may provide to meet the original design, which matters if you are unsure about the aftermarket filter's quality.

Where can I buy the correct filter once I have the part number?

Auto parts stores, online retailers like Amazon, small-engine dealers, and big-box hardware stores all stock Briggs and Stratton filters. Search for the part number to compare prices. Small-engine dealers often have the filter in stock when ready and can answer questions about installation.

What if my engine uses a cartridge filter and I cannot find a replacement?

Cartridge filters are less common but still widely available through Briggs and Stratton dealers and online retailers. If your local store does not have it, order it online or contact a dealer. Do not attempt to substitute a spin-on filter for a cartridge filter — they are not compatible.