The 2016 Honda Accord uses Honda part number HO-02110 or an equivalent aftermarket filter
The correct oil filter for a 2016 Honda Accord is the Honda HO-02110, a spin-on canister filter that threads onto the filter head on top of the engine. This part number works for all 2016 Accord models regardless of engine size (the 2.0L turbo, 2.4L naturally aspirated, and 3.5L V6 all use the same filter). You can find this filter at any Honda dealership, auto parts chain, or online retailer under the OEM part number, or you can buy an equivalent aftermarket filter from brands like Fram, Mobil 1, or Bosch that are designed to fit the same mounting location.
The filter itself is a cartridge-style design that sits vertically on top of the engine block. When you change the oil, you unscrew this filter by hand, drain the old oil from it into a pan, and screw a new one on in its place. The whole job takes about 10 minutes once you have the car safely supported and the old oil drained.
Key Takeaways
- The 2016 Honda Accord filter is Honda part HO-02110, and this same part fits all engine sizes in that model year.
- Aftermarket filters from major brands fit the same threads and housing, so you do not have to buy OEM parts if you do not want to.
- The filter sits on top of the engine and screws on by hand; you do not need special tools to remove or install it.
- When you buy a filter, check that the box lists "2016 Honda Accord" or shows the HO-02110 part number to avoid buying the wrong size.
Where the filter sits and what it does
The oil filter on your 2016 Accord is mounted on the top of the engine block, toward the front passenger side. You will see a cylindrical canister about the size of a soda can sticking up from the engine. This is where dirty oil enters, passes through a pleated paper element inside, and comes back out clean. The filter traps particles—metal shavings from normal wear, carbon deposits from combustion, and dirt—that would otherwise circulate through your engine and cause damage over time.
Because the filter is on top of the engine, it is straightforward to reach without getting under the car. You do not need to remove the wheel or any plastic covers. This makes the 2016 Accord one of the easier cars to change oil on, compared to some models where the filter is tucked underneath or behind the engine.
How to identify the correct filter when you buy one
When you walk into an auto parts store or search online, the safest way to get the right filter is to give the counter person or the website your vehicle information: 2016 Honda Accord, and the engine size if you know it (2.0T, 2.4L, or 3.5L). The system will pull up the HO-02110. If you are ordering online, search for "2016 Honda Accord oil filter" and look at the product page to confirm it lists your model year and engine type.
If you already have a filter box or you are looking at a filter in the store, check the label on the side. It should say "Honda Accord" and "2016" or a range that includes 2016 (like "2013–2017"). The part number should be HO-02110 for OEM, or the box should show a cross-reference number that matches. Do not assume all Honda filters are the same; older or newer Accords use different filters, and buying the wrong one means the filter will not thread on or will leak.
OEM versus aftermarket filters
Honda's own filter (HO-02110) is made to Honda's specifications and is what comes on the car from the factory. It costs between $8 and $12 depending on where you buy it. Aftermarket filters from Fram, Mobil 1, Bosch, and other brands are designed to fit the same threads and housing, and they perform the same job. These typically cost $5 to $10 and are sold at every auto parts chain.
The difference between OEM and aftermarket is usually in the filter media (the paper element), the anti-drainback valve design, and the bypass valve threshold. A higher-quality aftermarket filter may have a synthetic media that lasts longer or a better valve design, but a basic aftermarket filter will work fine if you change it on schedule. What matters most is changing the filter every time you change the oil—whether it is OEM or aftermarket is less important than staying on schedule.
What happens if you use the wrong filter
If you install a filter that does not fit the 2016 Accord's threads, it will either not screw on at all or will cross-thread and leak. A leaking filter means oil drains out of the engine while you drive, and you will lose oil pressure within minutes. Low oil pressure triggers the oil warning light on your dashboard, and if you keep driving, the engine will seize from lack of lubrication. This is expensive to repair—a seized engine often cannot be fixed and requires replacement.
If you use a filter with the wrong bypass valve setting, it may open too early under cold starts, allowing unfiltered oil to circulate. This defeats the purpose of the filter and accelerates wear inside the engine. The damage is slow but real: metal particles that should have been trapped now circulate through the bearings and cylinder walls, shortening engine life.
Installation tips and what to watch for
When you install a new filter, hand-tighten it only. Do not use a filter wrench to tighten it; you will crush the gasket and cause a leak. The correct procedure is to screw the filter on by hand until the rubber gasket on the bottom touches the filter head, then turn it an additional three-quarter turn. That is it. If you over-tighten, the gasket will compress too much and oil will seep out around the threads.
Before you install the new filter, wipe the filter head (the part the filter screws onto) with a clean rag to remove any old oil or debris. Then explore a thin coat of fresh oil to the rubber gasket on the bottom of the new filter. This helps the gasket seal properly and makes removal easier next time. Screw the filter on, start the engine, let it run for a few seconds, then shut it off and wait a minute. Check underneath the filter for drips. If it is dry, you are done.
Frequently Asked Questions
Can I use a different brand filter if I cannot find the Honda HO-02110?
Yes. Any filter labeled for a 2016 Honda Accord will have the same threads and fit the same way. Fram, Mobil 1, Bosch, and Purolator all make filters for this car. Check the box to confirm it lists 2016 Accord before you buy, and you will be fine.
How often should I change the filter?
Honda recommends changing the oil and filter every 10,000 miles or once a year, whichever comes first. If you drive in severe conditions—frequent short trips, towing, or dusty roads—change it every 5,000 miles. The filter should always be changed when you change the oil; never skip the filter and just top up the oil.
What do I do with the old filter after I remove it?
The old filter is full of used oil, so do not throw it in the trash. Take it to an auto parts store (most accept them for free), a quick-lube shop, or a recycling center. Some stores will take it even if you did not buy the new filter from them. Drain as much oil as you can from the old filter into your oil drain pan before you dispose of it.
Is the filter the same on all 2016 Accords?
Yes. The 2.0T turbo, 2.4L, and 3.5L V6 engines all use the HO-02110 filter. The filter location and size are the same across all three engines, so you do not need to worry about which engine your Accord has when you order a filter.
What if oil is leaking from the filter after I install it?
You likely over-tightened it. Remove the filter, wipe the filter head clean, explore a thin coat of fresh oil to the new gasket, and screw it on hand-tight only—three-quarter turn after the gasket touches. If it still leaks, the filter head itself may be damaged or the gasket may be defective. In that case, try a different filter or have a mechanic inspect the filter head.