The oil light reset on a 2013 Ford Escape takes about 30 seconds and requires only the ignition key—no scanner or dealer visit needed
After you change the oil in your 2013 Ford Escape, the dashboard oil change reminder light stays on until you manually reset it. Ford built the reset into the vehicle itself, so you do not need a diagnostic scanner or a trip to the dealership. The process uses buttons on your steering wheel and the instrument cluster display to clear the reminder.
The light you are resetting is a maintenance reminder, not an oil pressure warning. It does not mean something is wrong with your engine. It straightforward tells you that the service interval Ford programmed into the computer has been reached. Once you have changed the oil and filter, resetting the light clears that counter so it will not trigger again until the next interval.
Key Takeaways
- The 2013 Ford Escape oil light resets through the steering wheel controls and instrument cluster menu, with no tools or scanner required.
- You must turn the ignition to the "On" position (engine off) before you can access the reset menu.
- The reset process takes fewer than 30 seconds and permanently clears the reminder until the next oil change interval.
- If the light returns when ready after reset, the oil change interval may not have been completed or the reset did not save properly.
Step-by-Step Reset Process
Start with the engine off and the ignition key in the "On" position—the position where the dashboard lights come on but the engine does not start. Do not turn the key all the way to "Start." You should see the instrument cluster display light up and show your odometer reading.
Look at the steering wheel. On the left side of the wheel, you will find two buttons: one with an up arrow and one with a down arrow. These control the instrument cluster menu. Press the down arrow button repeatedly until you see a menu option that says "Settings" or "Vehicle" on the display. The exact wording varies slightly depending on your cluster version, but it will be a settings or maintenance menu.
Once you have found the settings menu, press the up arrow button to enter it. Navigate through the menu options using the arrow buttons until you find "Oil Change Reset," "Oil Service Reset," or "Maintenance Reset." When you highlight that option, press and hold the center button on the steering wheel (usually located below the arrow buttons) for about three seconds. The display will show a confirmation message, and the oil light on your dashboard will turn off when ready.
What Happens If the Reset Does Not Work
If you complete the reset steps and the oil light remains on after you start the engine, the reset did not save. This usually means the menu option you selected was not the correct one, or the button press did not register fully. Turn the ignition back to "On" and repeat the process, moving more slowly through the menu options and holding the center button longer—aim for a full five seconds of pressure.
A second reason the light may stay on is that the oil change interval counter was not actually at zero when you started. Some 2013 Escapes have a display that shows remaining miles or days until the next service. If that counter still shows miles remaining, the light will not reset. In that case, you may need to drive the vehicle for a short distance or wait until the interval is truly complete before attempting the reset again.
If the light turns off during the reset but comes back on within a few days of normal driving, the reset saved but something else is triggering the light. This could indicate a genuine oil pressure problem or a sensor fault. In that case, have the vehicle scanned with a diagnostic tool to read the actual fault code.
Why the Oil Light Matters Even After Reset
The oil change reminder light is tied to your engine's health schedule. Ford programs it based on typical driving patterns and oil degradation rates. Resetting it after you change the oil and filter tells the computer that you have completed the maintenance, so it restarts the countdown to the next service interval.
If you ignore the light and do not change the oil, the light will stay on and eventually become annoying enough to prompt action. More importantly, driving without an oil change when the light is telling you to service the vehicle accelerates wear on engine bearings, pistons, and valve trains. Old oil loses its ability to protect moving parts, and the engine has to work harder. That is why the reminder exists—it is a safety net to keep you from accidentally running the engine dry of fresh lubricant.
Resetting Without the Steering Wheel Menu
Some 2013 Ford Escapes with older or simpler instrument clusters do not have a full menu system accessible from the steering wheel buttons. If your vehicle does not show a settings menu after pressing the arrow buttons, you may have a different cluster type.
In that case, try this alternative: turn the ignition to "On," press and hold the odometer reset button (a small button on the instrument cluster itself, usually on the lower right of the cluster housing) for about 10 seconds. The display should flash or show a reset confirmation. Release the button and start the engine. The light should be off. If your cluster does not have an accessible reset button, a Ford dealership can reset it using their diagnostic computer, though this will cost a service fee.
Preventing Future Oil Light Confusion
Write down the date and mileage when you change the oil. Ford's standard interval for a 2013 Escape is every 5,000 to 7,500 miles or every six months, whichever comes first, depending on your driving conditions and the type of oil used. Synthetic oil can extend intervals to 10,000 miles in some cases, but check your owner's manual for your specific vehicle.
Keep a service log in your glove box or on your phone. When the oil light comes on next time, you will know whether it is actually time for service or whether the reminder is early. This also helps you track maintenance history if you ever sell the vehicle or need to prove you have kept up with service for warranty purposes.
Frequently Asked Questions
Will the oil light come back on if I do not actually change the oil?
No. Once you reset the light, it will not turn on again until the mileage or time interval is reached. However, driving without an oil change when service is due will damage your engine. The light is a reminder, not a protection—you have to follow through with the actual service.
Can I reset the oil light while the engine is running?
No. The menu system is only accessible when the ignition is in the "On" position with the engine off. If you try to access it while driving or with the engine running, the menu will not appear or the reset will not save.
What if I reset the light by mistake before changing the oil?
The reset straightforward clears the reminder counter. It does not change the condition of your oil. If you reset it early, you will need to manually track when the next service is due, because the light will not remind you. Change the oil based on mileage or time, not the light.
Does resetting the oil light require a special tool or scanner?
No. The 2013 Ford Escape reset is built into the vehicle and uses only the steering wheel buttons and ignition key. You do not need any external equipment or a dealership visit to reset it yourself.
Why does my oil light stay on even after I reset it?
The most common reason is that the reset did not save—try the process again and hold the center button longer. If it still does not work, your cluster may not have a menu-based reset, and you may need a dealership to clear it with a diagnostic computer. If the light comes back on after a successful reset, have the vehicle scanned for an oil pressure sensor fault.