The oil light reset process on a 2013 Ford Escape takes less than a minute and requires no tools — you do it from the driver's seat using the steering wheel controls and dashboard menu.
After you change the oil and filter, the oil change indicator light stays on until you manually reset it. Ford built the reset function into the vehicle's onboard computer, so you access it through the instrument cluster display. The steps are the same whether you changed the oil yourself or had a shop do it.
The 2013 Escape uses Ford's standard menu system for this reset. You will navigate using buttons on the steering wheel, not a separate key fob or computer. The whole process takes about 30 seconds once you know the sequence.
Key Takeaways
- Turn the ignition to the "On" position without starting the engine, then press the left arrow button on the steering wheel until "Oil Life" appears on the display.
- Once "Oil Life" is highlighted, press and hold the right arrow button for about three seconds until the display shows a confirmation message.
- The light will turn off when ready after the reset completes — you do not need to start the engine or drive the vehicle.
- If the reset does not work, check that you are in the correct menu and that the ignition is in the "On" position, not "Accessory" or "Start."
Step-by-Step Reset Instructions
Start by sitting in the driver's seat with the door closed. Turn the ignition key to the "On" position — this is the second click, where the dashboard lights come on but the engine does not start. Do not press the brake pedal or turn the key all the way to "Start."
Look at the instrument cluster (the display behind the steering wheel). You will see information like speed, fuel level, and engine temperature. On the left side of the steering wheel, you will find two arrow buttons. Press the left arrow button repeatedly until the display shows "Oil Life" or "Oil Change Due." This usually takes three to five presses.
Once "Oil Life" is highlighted on the screen, press and hold the right arrow button (on the right side of the steering wheel) for approximately three seconds. You will see the display change — it may show a percentage resetting to 100%, or it may show a message confirming the reset. Release the button once the change appears.
Turn the ignition back to the "Off" position. The oil change light on your dashboard should now be off. If it is still on, repeat the process from the beginning — the most common mistake is not holding the right arrow button long enough.
What to Do If the Reset Does Not Work
If the light remains on after you complete the steps, the most likely cause is that the ignition was in the wrong position. The reset only works when the key is in the "On" position — not "Accessory" (where the radio plays but the engine is off) and not "Start" (where the engine cranks). Turn the key back to "Off," wait five seconds, and try again with the key in the correct position.
A second possibility is that you did not hold the right arrow button long enough. The reset requires a sustained press of at least three seconds. If you tapped it quickly, the system did not register the command. Repeat the process and count to three while holding the button down.
If the light still does not reset after two or three attempts, the vehicle's computer may not have registered the oil change. This occasionally happens if the engine was running during the reset attempt. Turn off the engine completely, wait a few minutes, and try the process once more with the engine fully cooled and the ignition in the "On" position only.
Why the Oil Light Stays On After an Oil Change
The oil change indicator is a timer and mileage counter built into your Escape's computer, not a sensor that detects oil condition. It tracks how long it has been since the last reset and how many miles you have driven. When either the time interval or mileage limit is reached, the light comes on to remind you that service is due.
The light does not turn off automatically after you change the oil because the computer has no way to know you performed the service. You must tell it by resetting the indicator manually. This is true whether you changed the oil at a Ford dealership, an independent shop, or in your own driveway.
Resetting the Light at a Service Shop
If you had the oil changed at a dealership or tire shop, ask the technician to reset the light before you leave. Most shops do this as part of the service, but some require you to ask. It takes them the same 30 seconds it takes you, and they have done it hundreds of times.
If you pick up your vehicle and the light is still on, call the shop and ask them to reset it. Do not assume they forgot — some shops reset it only if you request it. A quick phone call will get it done, and you may not even need to return to the location if the shop can walk you through the process over the phone.
Frequently Asked Questions
Can I reset the oil light while the engine is running?
No. The reset only works when the ignition is in the "On" position with the engine off. If you try while the engine is running, the system will not recognize the command. Turn off the engine, wait a moment, and try again with the key in the "On" position.
What if my 2013 Escape has a push-button start instead of a key?
The process is the same. Press the start button once to put the vehicle in the "On" position without starting the engine, then follow the steering wheel button sequence. If you have a push-button start, your Escape may also have a touchscreen display, but the reset still uses the steering wheel controls.
Does resetting the light mean the oil is clean again?
No. Resetting the light only tells the computer to start counting down to the next service interval. It does not change the condition of your oil. Reset the light only after you have actually changed the oil and filter.
How often should I reset this light?
That depends on your driving habits and the oil type you use. Ford's maintenance schedule for the 2013 Escape recommends an oil change every 10,000 miles or 12 months for synthetic oil, or every 5,000 miles or 6 months for conventional oil. Check your owner's manual for the exact interval that applies to your vehicle.