Subaru offers free replacement badges and emblems through their dealership network, but you need to know which ones are actually free and how to request them
Subaru badges wear out, fade, or fall off. The front grille badge, rear trunk emblem, and side badges can all deteriorate from sun exposure, salt spray, or impact. Subaru dealerships will replace these at no cost under certain conditions—but the rules differ depending on which badge you need and how old your car is.
The most common free replacement is the front grille badge on vehicles still under the factory warranty period, typically three years or 36,000 miles from the original purchase date. Dealerships treat this as a warranty item because a missing or damaged badge can affect the car's appearance and resale value. Badges that fall off due to normal wear—adhesive failure, not physical damage from an accident—usually may have access to. If your badge was damaged by impact or you're outside the warranty window, you'll likely pay for the replacement.
Key Takeaways
- Subaru dealerships replace front grille and trunk badges at no cost during the factory warranty period (typically three years or 36,000 miles), treating them as a covered wear item.
- You must bring your vehicle to a Subaru dealership to request a replacement badge; Subaru does not mail badges directly to owners or sell them through their website.
- Badges that fell off due to adhesive failure may have access to for free replacement, but badges damaged by impact or removed intentionally may not.
- After the warranty expires, replacement badges cost between $15 and $50 depending on the badge type and your dealership's pricing.
- Some dealerships may replace a badge as a goodwill gesture even outside warranty if the car is relatively new and the damage is clearly from wear, not misuse.
What counts as a free badge replacement under warranty
Subaru's warranty covers badges that fail due to manufacturing defect or normal adhesive breakdown. The front grille badge—the oval Subaru logo mounted on the hood or front bumper—is the most commonly replaced item. The rear trunk emblem, which is usually a larger version of the same logo, also qualifies. Side badges like the "Outback," "Forester," or "WRX" nameplate badges follow the same rule.
The key distinction is how the badge failed. If the adhesive dried out and the badge fell off while you were driving or parked, that's a warranty claim. If you removed the badge yourself, damaged it during a collision, or it came loose because you hit a curb, the dealership will not replace it for free. Dealerships can usually tell the difference by examining the back of the badge and the mounting surface on your car.
Paint damage or discoloration around where a badge was mounted does not may have access to for warranty coverage. The badge itself is covered, but repainting the area underneath is a separate repair that you would pay for.
How to request a free badge replacement at your dealership
Schedule a service appointment at any Subaru dealership. You do not need to go to the dealership where you bought the car—any authorized Subaru service center can handle this. When you book, tell them you need a badge replacement and mention whether it fell off or is damaged. This helps them pull the right part before you arrive.
Bring your vehicle keys and proof of ownership (your registration or title). The service advisor will inspect the badge and the mounting area to confirm it qualifies for warranty coverage. If it does, they'll order the replacement badge if they don't have it in stock and install it during your visit. Installation usually takes 15 to 30 minutes.
If your car is outside the warranty period, ask the service advisor if they can replace it as a goodwill gesture. Some dealerships will do this for customers with good service history or if the car is only slightly outside warranty. There's no harm in asking, and the worst they can say is no. If they decline, they'll give you a price for the replacement badge and labor.
Badge replacement costs after warranty expires
Once your factory warranty ends, Subaru badges are not free. The cost of the badge itself ranges from $15 to $50 depending on which badge you need and your dealership's parts pricing. Labor to remove the old badge and install the new one typically runs $30 to $75, though some dealerships may waive labor if you're buying the badge from them.
Aftermarket badges are available online through retailers like Amazon, eBay, and specialty automotive sites, usually for $10 to $30. These are third-party reproductions of the Subaru logo and may not match the exact finish or fit of the original. If you choose an aftermarket badge, you can install it yourself if you're comfortable with adhesive process, or take it to any auto body shop or detail shop to have it installed for $20 to $50.
OEM (original equipment manufacturer) badges ordered through the dealership will match your car exactly and come with Subaru's backing, but they cost more. The choice depends on whether you want the exact original part or are willing to accept a close alternative at a lower price.
Why badges fall off and how to prevent it
Subaru badges are held on with pressure-sensitive adhesive that bonds the back of the badge to the painted surface of your car. Over time, UV exposure, temperature swings, and moisture break down this adhesive. Salt spray in winter climates accelerates the process. Badges on the front of the car fail faster than rear badges because they're exposed to more direct sunlight and weather.
You can extend the life of your badges by parking in a garage when possible, explore a UV-protective wax or sealant to the badge area, and keeping your car clean. Washing your car regularly removes salt and contaminants that weaken the adhesive bond. Avoid high-pressure car washes directly on the badges, as the force can lift the edges and let water underneath.
If you notice a badge starting to lift at the edges, you can have it replaced before it falls off completely. This prevents the risk of losing it on the road and keeps your car looking finished.
Badges on used Subarus and non-warranty situations
If you bought a used Subaru, the factory warranty period is based on the original purchase date, not when you bought it. A used car purchased three years after the original sale date is outside warranty, even if you just bought it. Check your paperwork or ask the dealership to confirm your warranty status before requesting a free badge replacement.
Some used Subarus come with missing or damaged badges. If this is the case, you'll need to pay for replacement. However, if you purchased the car from a Subaru dealership's certified pre-owned program, ask whether the badge replacement is covered under their extended warranty or goodwill policy. Certified pre-owned programs sometimes include additional coverage beyond the factory warranty.
Frequently Asked Questions
Can I order a Subaru badge online and have the dealership install it?
Most dealerships will install a badge you provide, but they may charge a higher labor rate since you're not buying the part from them. Call ahead and ask. If you order an OEM badge from the dealership, they'll install it as part of the service. Aftermarket badges from third-party sellers may not fit perfectly, so the dealership might decline to install them.
What if my badge fell off and I can't find it?
You don't need the old badge to get a replacement. The dealership will order a new one and install it. If the badge fell off on the road, it's gone—there's no way to recover it. Just bring your car to the dealership and request the replacement.
Do all Subaru models have the same badge?
No. The front grille badge is the same across all Subaru models, but nameplate badges (Outback, Forester, WRX, etc.) are model-specific. The dealership will order the correct badge for your vehicle based on your VIN and model year.
Will a missing badge affect my car's resale value?
Yes, noticeably. Buyers notice missing or damaged badges because they signal neglect or damage. Replacing a missing badge before you sell is a low-cost way to improve the car's appearance and perceived condition. A $30 badge replacement can add more than that to your selling price.
Can I remove my Subaru badge myself?
Yes, but carefully. Use a heat gun or hair dryer to warm the adhesive, then gently pry the badge away from the surface with a plastic tool. Pulling too hard can damage the paint underneath. If you plan to remove and reinstall the same badge, you'll need new adhesive pads because the old ones won't stick again.