What the Dodge Charger Convertible is and when it was made
The Dodge Charger Convertible is a two-door, four-seat muscle car with a retractable soft top that Dodge produced from 1968 to 1971. It shares the same body platform and engine lineup as the hardtop Charger but adds the option to drop the roof. The convertible version was less common than the hardtop — Dodge built roughly 10,000 convertibles across those four model years, compared to tens of thousands of hardtops.
If you are shopping for a used Charger Convertible today, you are looking at a vehicle that is now 50+ years old. The market for these cars has grown steadily, and prices reflect their status as collectible American muscle cars. Condition, engine size, and originality matter far more than mileage when pricing a classic Charger.
Key Takeaways
- The Charger Convertible was built only from 1968 to 1971, making it rarer than the hardtop version and generally more expensive on the collector market.
- Engine options ranged from a 225-cubic-inch slant-six to a 440-cubic-inch big block, with the 440 and 426 Hemi commanding the highest prices and performance.
- The convertible top adds weight and reduces structural rigidity compared to the hardtop, which affects handling and can make the frame flex over time.
- Original documentation, matching numbers on the engine and chassis, and service records are the primary factors that determine value and authenticity.
- Rust in the floor pans, trunk, and around the convertible top frame is the most common structural problem on surviving examples.
Engine choices and what they mean for performance
Dodge offered five engine options across the Charger Convertible's production run. The base engine was a 225-cubic-inch slant-six that produced 145 horsepower — adequate for daily driving but not what buyers chose if they wanted performance. The next step up was a 318-cubic-inch V8 with 230 horsepower, followed by a 383-cubic-inch V8 with 280 to 330 horsepower depending on the year.
The performance engines were the 440-cubic-inch V8 and the legendary 426-cubic-inch Hemi. The 440 produced between 375 and 390 horsepower, while the 426 Hemi delivered 425 horsepower in street trim. The Hemi was the rarest and most sought-after option — fewer than 500 Charger Convertibles left the factory with a Hemi engine. If you are evaluating a Charger Convertible, the engine size is often the first thing to verify, because engine swaps are common and original matching-numbers engines are worth significantly more.
Structural differences between the convertible and hardtop
Removing the roof and adding a folding top mechanism required Dodge to reinforce the frame and floor pan to compensate for lost rigidity. The convertible has a heavier frame, thicker door panels, and a reinforced windshield frame compared to the hardtop. Despite these changes, a convertible will always flex slightly more than a hardtop, especially over rough roads or during hard cornering.
The convertible top mechanism itself is a potential repair point. The hydraulic cylinders that raise and lower the top can leak, the fabric can tear or fade, and the frame can rust where it connects to the body. A new convertible top for a classic Charger costs between $2,000 and $4,000 installed, depending on whether you choose original-style canvas or modern vinyl. The weight of the convertible top and reinforcement also means the car is roughly 150 to 200 pounds heavier than a comparable hardtop, which slightly reduces acceleration and fuel economy.
Common rust and structural problems
The Charger Convertible's age means rust is the primary concern on any example you inspect. The most vulnerable areas are the floor pans (especially under the rear seats), the trunk floor, the door bottoms, and the convertible top frame where it meets the body. Water can pool in the convertible top mechanism and drip into the interior, accelerating rust in areas that are hard to reach and expensive to repair.
The frame rails and subframe can also rust from the inside out, which is why a pre-purchase inspection by a mechanic familiar with classic cars is essential. Surface rust can be cleaned and treated, but rust that has eaten through metal requires welding or panel replacement. A Charger Convertible with solid floor pans and no frame damage is significantly more valuable than one requiring structural work. If you are considering a car with rust, get a detailed estimate from a restoration shop before committing to the purchase.
Interior and electrical systems in a 50-year-old car
The interior of a 1968–1971 Charger Convertible was built to standards that are now decades old. The dashboard is metal and plastic, the seats are vinyl or cloth, and the wiring is cloth-insulated copper that can become brittle and fail. The electrical system is 12-volt negative ground, which is standard, but the components themselves — alternator, starter, voltage regulator — are original equipment on most cars and may need replacement.
Air conditioning systems in these cars used refrigerant (R-12) that is no longer manufactured and illegal to vent in most states. If the original A/C system is non-functional, converting it to modern refrigerant (R-134a) requires a new compressor and condenser, costing $1,500 to $3,000. Many owners straightforward leave the A/C inoperative or remove it entirely. The heater, defroster, and window regulators are mechanical and often work fine if they have been maintained, but replacement parts can be hard to source.
Fuel economy and running costs
A Charger Convertible with a big-block engine will consume fuel at a rate that reflects its age and size. A 440 or Hemi typically returns 8 to 12 miles per gallon in mixed driving, depending on how the car is driven and maintained. The slant-six and 318 V8 will do somewhat better — roughly 12 to 15 miles per gallon — but still far below modern standards. These cars require regular-grade gasoline (87 octane), though the Hemi and 440 can benefit from premium fuel.
Insurance for a classic Charger Convertible is usually cheaper than for a modern car of equivalent value, because specialty insurers offer agreed-value policies that do not penalize you for the car's age. However, you will need to budget for maintenance: new tires, brake fluid, coolant, and oil changes are routine. Parts availability varies — common items like belts, hoses, and filters are straightforward to find, but trim pieces, weatherstripping, and interior components can require searching specialty suppliers or salvage yards.
How to verify authenticity and original specifications
The most important document for a classic Charger Convertible is the original window sticker (also called a Monroney label), which lists the factory options and engine. If the sticker is missing, the next best source is the build sheet, a factory document that was sometimes left in the car. The VIN (Vehicle Identification Number) can be decoded to confirm the model year, engine code, and assembly plant, but it does not tell you whether the engine is original to the car.
The engine block itself carries a casting date and a production code that can be cross-referenced to verify it is correct for the year and model. A Hemi engine will have "426 HEMI" cast into the block. If you are buying a car claimed to have a Hemi or 440, have a mechanic verify the engine code before you complete the purchase. Service records, old registration documents, and photographs from previous owners all help establish provenance. A Charger Convertible with documented history and matching numbers will command a premium over one with unknown origins.
Frequently Asked Questions
How much does a Dodge Charger Convertible cost?
Prices vary widely based on condition, engine, and originality. A Charger Convertible in fair condition with a 318 or 383 engine typically sells for $25,000 to $45,000. A well-restored example with a 440 or Hemi can exceed $75,000. Original, unrestored cars with low mileage and matching numbers command the highest prices, sometimes exceeding $100,000 for a Hemi model.
Is the convertible top reliable?
The hydraulic mechanism is the weak point. Cylinders can leak, hoses can crack, and the pump can fail. If the top operates smoothly and the fabric is intact, you are in good shape. If it moves slowly, makes noise, or does not seal properly, budget $1,500 to $2,500 for repair or replacement of the hydraulic system.
Can I drive a Charger Convertible in winter?
Yes, but it requires care. The convertible top provides less insulation than a hardtop, and the car will be cold inside. Road salt will accelerate rust, so wash the undercarriage regularly and store the car in a garage if possible. Many owners keep these cars garaged during winter months to minimize exposure to salt and moisture.
What should I look for during a test drive?
Listen for engine knock or rough idle, which can indicate carburetor or ignition problems. Check that the convertible top opens and closes smoothly without grinding or hesitation. Feel for play in the steering wheel and listen for clunks over bumps, which suggest worn suspension components. The brakes should feel firm and responsive, not soft or spongy.
Are parts still available for a 1968–1971 Charger?
Common mechanical parts like belts, hoses, filters, and gaskets are available from auto parts stores. Trim, weatherstripping, interior panels, and body hardware are harder to find and often require specialty suppliers or salvage yards. Engine and transmission parts are available but can be expensive. Before buying, confirm that any parts you might need are obtainable.