The bolt pattern on a Dodge Charger depends on the model year, and you must match it exactly when buying new wheels

A bolt pattern is the arrangement of holes on your wheel hub — the number of holes and the distance between them. For a Dodge Charger, this pattern varies by generation. Most 2006 to 2024 Chargers use a 5×115 mm bolt pattern (five holes, 115 mm apart), but some earlier models and specific trims differ. You cannot fit a wheel with the wrong bolt pattern onto your car; the wheel will not sit flush against the hub, and forcing it risks damage to both the wheel and the hub itself.

The bolt pattern is printed on your vehicle's door jamb label and in your owner's manual. You can also look it up by your exact model year and engine size, since some Charger variants have different patterns. Before you order wheels online or from a shop, confirm your pattern by checking these sources rather than assuming all Chargers are the same.

Key Takeaways

  • Most 2006–2024 Dodge Chargers use a 5×115 mm bolt pattern, but you must verify your specific year and trim because exceptions exist.
  • The bolt pattern is listed on your door jamb label and in your owner's manual; do not guess or rely on what worked for someone else's Charger.
  • Wheels with the wrong bolt pattern will not mount safely and can damage your hub and studs if forced.
  • When shopping for wheels, always confirm the bolt pattern matches before purchase, and ask the seller to verify if you are unsure.

Bolt patterns by Dodge Charger generation

The first-generation Charger (1966–1978) used a 5×4.5 inch bolt pattern, which is different from modern Chargers and rarely seen on new wheels today. If you own a classic Charger, specialty wheel shops that focus on vintage cars are your best resource.

The modern Charger began in 2006 with the LX platform. From 2006 through 2024, the vast majority of Chargers come with a 5×115 mm bolt pattern. This is Chrysler's standard for full-size rear-wheel-drive cars, and it is the pattern you will find on most aftermarket wheels designed for Dodge and Chrysler vehicles. Some 2006–2010 models with certain wheel options may have used 5×4.5 inch (5×114.3 mm) patterns, so checking your specific vehicle is still necessary.

The 2015 redesign did not change the bolt pattern for most trims. However, if your Charger came with a non-standard wheel size or was ordered with a special package, the pattern may differ. Always verify before ordering.

How to find your Charger's bolt pattern

Open your driver's side door and look at the door jamb — the vertical edge where the door closes. You will see a white or yellow label with vehicle specifications. This label lists tire size, load ratings, and sometimes wheel specifications including bolt pattern. Not all door jamb labels include bolt pattern, so this is a starting point, not a may provide.

Your owner's manual contains a specifications section that lists wheel and tire information. Look for a page titled "Wheels and Tires" or "Specifications." The manual will state the bolt pattern in both metric (mm) and inch formats.

If you cannot find the information in either place, you can measure the bolt pattern yourself. Count the number of holes on your wheel hub. Then measure the distance from the center of one hole to the center of the hole directly across from it (for an even number of holes) or to the second hole over (for an odd number). Write down both numbers — for example, 5 holes and 115 mm apart — and compare to known Charger patterns.

Why bolt pattern matters for safety and fit

The bolt pattern determines how the wheel sits on the hub. If the holes do not align, the wheel will rock or sit off-center. Driving on a misaligned wheel causes uneven pressure on the studs (the bolts that hold the wheel), which can bend or break them. A broken stud can cause the wheel to separate from the car while driving.

A wrong bolt pattern also affects how the wheel mounts. Even if you force the wheel onto the studs, the wheel will not be centered on the hub. This throws off the balance of the wheel, causes vibration at highway speeds, and puts stress on the suspension and steering components. Over time, this can damage the hub itself, requiring expensive repair.

Wheel shops and tire retailers will refuse to mount a wheel with the wrong bolt pattern because the liability is too high. If you order wheels online and they arrive with the wrong pattern, you cannot use them on your Charger.

Aftermarket wheels and bolt pattern compatibility

Most aftermarket wheel manufacturers offer wheels in 5×115 mm specifically for Dodge and Chrysler vehicles, making it straightforward to find options for a modern Charger. Popular brands like American Racing, Fuel, KMC, and Motegi all make wheels in this pattern. When you shop online or at a wheel shop, filter by "5×115 mm" or "5×4.5 inch" depending on your Charger's year.

Some wheel shops will help you verify your bolt pattern before you buy. If you are unsure, bring your Charger in or provide the year, model, and engine size, and they can look it up in their system. This takes five minutes and prevents an expensive mistake.

If you find a wheel you love but it is not available in your bolt pattern, do not buy it. There is no adapter or spacer that safely changes a bolt pattern. Adapters exist for other wheel specifications (like offset or center bore), but bolt pattern adapters are not safe for street driving and are illegal in many places.

Center bore and offset: other wheel measurements that matter

Bolt pattern is only one measurement. Center bore is the size of the hole in the center of the wheel that fits over the hub. Dodge Chargers typically have a center bore of 71.5 mm. If the wheel's center bore is too small, it will not fit. If it is too large, the wheel will not be centered, causing vibration.

Offset is how far the wheel sits in or out from the hub. It is measured in millimeters and affects how the wheel looks and how it clears the suspension and brake components. A wheel with the wrong offset can rub the inside of the fender or the suspension, or it can stick out too far and look unsafe. Most Chargers use an offset between +20 mm and +45 mm, depending on the trim and suspension setup.

When you order wheels, confirm the bolt pattern, center bore, and offset all match your Charger. Reputable wheel shops will list all three specifications on their product pages.

Frequently Asked Questions

Can I use wheels from a different Dodge model on my Charger?

Only if the bolt pattern matches. Some Dodge trucks and SUVs use different patterns. Always verify the pattern on the wheel itself or ask the seller before buying. Even if the wheel fits, the offset and center bore may not be correct for your Charger, so check all three measurements.

What does 5×115 mm mean?

The first number (5) is the number of holes on the wheel hub. The second number (115 mm) is the distance between the holes, measured from the center of one hole to the center of the hole directly across from it. Some sellers list this as 5×4.5 inches, which is the same measurement in inches.

My Charger is older — what bolt pattern does it have?

Check your door jamb label and owner's manual first. If your Charger is a 2006 or newer, it almost certainly uses 5×115 mm. If it is older than 2006, it may use 5×4.5 inch. Measure your current wheels or contact a Dodge dealer with your VIN to confirm.

What happens if I install wheels with the wrong bolt pattern?

The wheel will not mount safely. The holes will not align with the studs, and forcing the wheel on will bend the studs and damage the hub. The wheel will vibrate, the car will be unsafe to drive, and you risk the wheel separating while driving. Do not attempt this.

Where can I find the bolt pattern if my owner's manual is missing?

Check the door jamb label on the driver's side door. If that does not list it, contact a Dodge dealer with your VIN and model year — they can look it up in their system. You can also measure your current wheels yourself by counting the holes and measuring the distance between them.