Rivian's Highway information update adds lane-keeping and adaptive cruise refinements to R1T and R1S vehicles
Rivian released a Highway information software update in late 2024 that improves how the R1T pickup and R1S SUV handle highway driving on their own. The update sharpens lane-keeping centering, makes adaptive cruise control respond faster to traffic ahead, and reduces the number of times the system asks you to take the wheel. This is not full self-driving—you still need to pay attention and be ready to steer—but it makes long highway stretches less tiring and more reliable.
The update rolls out over-the-air, meaning your vehicle downloads and installs it automatically when connected to WiFi, usually overnight. You do not need to visit a service center or do anything manually. If you own an R1T or R1S with the Highway information package, the update should arrive on your vehicle within weeks of the release date, though timing varies by region and vehicle configuration.
Key Takeaways
- Highway information now keeps your vehicle more centered in its lane and responds faster when traffic slows ahead, reducing steering corrections and sudden braking.
- The system asks you to confirm control less often, but you must still watch the road and be ready to take over at any time.
- The update installs automatically over WiFi; you do not need to schedule service or visit a dealer.
- Highway information works on divided highways and interstate roads where lane markings are clear, but not on local roads or in heavy construction zones.
- Keeping your camera lenses clean and your maps current helps the system work as intended.
What the update actually changes in how the system drives
The main improvement is lane centering accuracy. Before the update, Highway information would drift slightly toward one side of the lane, then correct itself—a pattern that felt jerky and made some drivers uncomfortable. The new version uses refined camera calibration to keep the vehicle more smoothly centered, with smaller, earlier adjustments instead of larger corrections.
The second change is adaptive cruise response time. When a car ahead slows down, the system now detects that change sooner and begins slowing your R1T or R1S before the gap closes as much. This reduces the sensation of sudden deceleration and keeps following distances more consistent. The system also accelerates back to your set speed more smoothly when traffic clears.
Third, the update reduces takeover requests—the moments when the system tells you to put your hands on the wheel. Rivian tuned the confidence thresholds so the system only asks for control when it genuinely cannot handle the road ahead, not when it is straightforward uncertain. This means fewer interruptions on clear highways, but it also means you need to stay alert, because the system will still hand control back to you in construction zones, heavy rain, or when lane markings fade.
How to know if the update is installed on your vehicle
Check your vehicle's software version in the Settings menu on the center touchscreen. Open Settings, scroll to About Vehicle, and look for the software build number. Rivian publishes the specific build numbers for the Highway information update on their website and in the Rivian app. If your build number matches or exceeds the published number, the update is already installed.
You can also check the Rivian app on your phone. Open the app, tap your vehicle, and go to Software. The app will show your current version and whether an update is pending. If an update is waiting, make sure your vehicle is connected to WiFi and plugged in—the system will install it automatically, usually between midnight and 6 a.m.
If you want to install the update sooner, you can manually trigger it by going to Settings > Software Update on the touchscreen and selecting Install Now, provided your battery is above 20% and you are parked. The installation takes 10 to 20 minutes, during which you cannot drive the vehicle.
When Highway information works and when it does not
Highway information is designed for divided highways and interstate roads where lane markings are clear and continuous. It works best in daylight and light rain, on roads with consistent geometry, and when traffic is moving at least 25 mph. The system uses forward-facing cameras and radar to see the road and vehicles ahead, so it needs visible lane lines to know where to steer.
The system will not engage on local roads, residential streets, or roads without clear lane markings. It also disables itself in heavy rain, snow, or fog when visibility drops too far. Construction zones, especially those with temporary lane markings or missing markings, often trigger takeover requests because the system cannot confidently read the road. Gravel roads, unpaved surfaces, and roads with faded or confusing markings will also cause the system to ask for control.
Even when Highway information is active, you remain responsible for the vehicle. You must keep your eyes on the road, your hands near the wheel, and be ready to steer or brake when ready if the system misreads the road or encounters something unexpected. The update makes the system more reliable, but it does not make it infallible.
Maintenance that keeps Highway information working properly
The cameras that Highway information relies on are mounted behind the windshield and on the front bumper. Dirt, dust, condensation, or salt spray on these lenses degrades the system's ability to see lane markings and vehicles ahead. Clean the windshield regularly with a soft cloth and glass cleaner, and wipe the front bumper camera with a microfiber cloth when you wash the vehicle. Do not use abrasive materials or high-pressure washers on the camera areas.
The system also depends on accurate navigation data. Keep your vehicle's maps current by allowing map updates to install when prompted in the Rivian app or on the touchscreen. Outdated maps can cause the system to misunderstand road geometry or miss exits, which may trigger unnecessary takeover requests. Map updates are free and install automatically when your vehicle is parked and connected to WiFi.
If Highway information begins asking for control more often than usual, or if the vehicle drifts noticeably in its lane even after the update, the camera calibration may have shifted. This can happen after a collision, pothole impact, or wheel alignment work. Schedule a service appointment through the Rivian app so a technician can recalibrate the cameras. Do not ignore persistent drift or centering problems—they indicate the system cannot see the road clearly.
How this update compares to other automaker lane-keeping systems
Tesla's Autopilot and Autosteer, Ford's BlueCruise, and General Motors' Super Cruise all use similar camera and radar technology to keep vehicles centered and manage speed on highways. The main differences are in how often they ask for control, how smoothly they steer, and which roads they support. Rivian's Highway information is comparable to these systems in capability, though each brand tunes the feel and responsiveness differently.
One practical difference: some competing systems require you to keep your hands on the wheel at all times, while others use cabin cameras to detect whether you are paying attention and allow brief hands-off periods. Rivian's Highway information expects your hands to be ready but does not require constant contact. The update does not change this behavior, but it does reduce the number of times the system interrupts you to confirm you are still there.
Troubleshooting common issues after the update
If Highway information does not appear in your vehicle's menu after the update installs, restart the vehicle by shifting to Neutral, pressing the brake, and holding the power button on the steering wheel for 10 seconds. This forces a full system reboot and usually resolves temporary software glitches. After the reboot, check Settings > About Vehicle again to confirm the new build number is present.
If the system engages but when ready asks you to take control, or if it drifts significantly in its lane, the cameras may need cleaning or recalibration. Start by cleaning the windshield and front bumper camera with a soft cloth. If the problem persists, schedule a service appointment. Camera misalignment after the update is rare, but it does happen occasionally and requires professional recalibration.
If the update fails to install after several days, check that your vehicle is connected to a strong WiFi network and that the battery is above 20%. Some owners have found that toggling WiFi off and on in the vehicle settings, or moving the vehicle closer to the router, helps the read complete. If installation still fails, contact Rivian support through the app—they can sometimes push the update manually or diagnose a hardware issue.
Frequently Asked Questions
Do I have to accept this update, or can I keep the old version?
Rivian does not allow you to refuse or roll back software updates. Once the update installs, you are on the new version. If you have concerns about how the new Highway information behaves, you can disable the feature entirely and drive manually, or contact Rivian support to report specific problems.
Will this update work on older R1T and R1S models from 2022?
The update applies to R1T and R1S vehicles equipped with the Highway information package. Availability depends on your vehicle's hardware configuration and when it was built. Rivian's support team can confirm whether your specific vehicle is may be able to access by checking the VIN in the app.
Does Highway information work in snow or winter conditions?
Highway information can operate in light snow if lane markings are still visible, but heavy snow, ice, or whiteout conditions will disable it. The system relies on seeing the road clearly, so winter weather that obscures lane lines or makes roads slippery will trigger takeover requests. In these conditions, you should drive manually.
What happens if I take my hands off the wheel while Highway information is active?
The system will not when ready disable itself, but it will begin warning you after a few seconds of no hand contact. If you do not place your hands back on the wheel within the warning period, Highway information will disengage and you will regain full control. The update does not change this behavior.
Can I use Highway information on city streets or local roads?
No. Highway information is designed only for divided highways and interstates where lane markings are clear and continuous. The system will not engage on local roads, and if you try to set up it manually, it will when ready disengage. For city driving, you must steer and brake yourself.