A key fob battery usually lasts three to four years before it stops holding a charge
When your key fob stops working, the battery is almost always the culprit. The battery inside a fob is a small coin-cell battery — typically a CR2032, CR2025, or CR2016 — that costs between $3 and $8 and takes about two minutes to swap out. You do not need a dealer or a technician. Opening the fob, removing the old battery, and installing a new one is something you can do at home with no special tools.
The exact steps depend on how your fob is designed, but the process is the same: pry it open, note which side of the battery faces up, take out the old one, and slide in the new one the same way. Most fobs use a small slot or seam you can open with a coin or a plastic pry tool. Some have a screw you remove first.
Key Takeaways
- Key fob batteries are inexpensive coin-cell batteries (usually CR2032, CR2025, or CR2016) that you can buy at any pharmacy, grocery store, or hardware store for $3 to $8.
- You can replace the battery yourself by prying open the fob, removing the old battery, and inserting a new one in the same orientation — no tools or special knowledge required.
- Before you buy a replacement battery, check your owner's manual or look inside the fob to see which type your car uses, since different models use different sizes.
- If the fob still does not work after you replace the battery, the problem is likely a worn button contact or internal damage, and you will need a replacement fob from your dealer.
Finding out which battery your fob needs
The easiest way is to open your fob and look at the battery already inside. The battery itself is stamped with a code — CR2032, CR2025, CR2016, or similar. Write down that code and buy the same type. If you do not want to open it yet, check your owner's manual, which usually lists the battery type in the key fob section.
If you cannot find the manual, search online for your car's year, make, and model plus "key fob battery." Most common cars use CR2032, which is the most widely stocked size. You can also call your car's dealer parts department and give them your vehicle identification number (VIN) — they will tell you the exact battery type in seconds.
How to open your key fob
Most fobs have a small slot or seam running around the edge where the two halves meet. Insert a coin (a dime or penny works) or a plastic pry tool into the slot and gently twist to separate the halves. Do not force it — if it does not budge, you may be in the wrong spot. Look for a small notch or line that marks the seam.
Some fobs have a screw on the back or inside the battery compartment. If you see one, use a small Phillips or flathead screwdriver to remove it before you try to pry the fob open. A few newer fobs use a push-button release on the side — press it and the battery cover slides out. Check your owner's manual if you are unsure which type you have.
Removing and replacing the battery
Once the fob is open, you will see the battery sitting in a small metal holder. Note which side is facing up — the positive side (marked with a + symbol) or the negative side. Use your fingernail or a plastic tool to gently pry the battery out of its holder. Do not use a metal tool, which can damage the holder or create a spark.
Slide the new battery into the holder with the same side facing up as the old one. The battery should sit flat and click into place. Close the fob by pressing the halves together until you hear a click, or replace the screw if your fob has one. Test the fob by pressing a button — it should work when ready.
Where to buy a replacement battery
Key fob batteries are sold at pharmacies (CVS, Walgreens), grocery stores, hardware stores (Home Depot, Lowe's), and online retailers. You can also buy them at car parts stores like AutoZone or O'Reilly. Prices are usually the same everywhere — $3 to $8 per battery. Buy two or three at once since they are cheap and you may need one later.
If you are buying online, search for the battery code (CR2032, for example) and "key fob battery" to find the right product. Avoid buying very cheap batteries from unknown sellers, as they may not hold a charge as long as name brands. Duracell, Energizer, and Panasonic are reliable choices.
What to do if the fob still does not work
If you replaced the battery and the fob still does not respond, the problem is usually inside the fob itself — worn button contacts, water damage, or a broken circuit board. These problems cannot be fixed at home. You will need to buy a replacement fob from your car's dealer or from an aftermarket seller who programs fobs for your car's make and model.
Before you buy a new fob, try one more thing: clean the battery contacts inside the fob with a dry cloth or a pencil eraser. Sometimes dirt or corrosion on the metal contacts prevents the battery from making good electrical contact. If that does not work, a replacement fob is your next step. Dealer fobs usually cost $200 to $500 depending on your car, while aftermarket fobs cost $50 to $150 and may require programming at a locksmith or dealer.
Programming a new fob after battery replacement
In most cases, you do not need to reprogram your fob after you replace the battery. The fob will work when ready once you close it back up. Programming is only necessary if you buy a completely new fob that has never been paired to your car.
If you do need to program a new fob, the process varies by car. Some cars let you program a fob yourself by sitting in the driver's seat, turning the key to the "On" position without starting the engine, and pressing buttons on the fob in a specific sequence. Others require a dealer or locksmith to program it using special equipment. Your owner's manual will explain the process for your car, or you can call your dealer's service department for instructions.
Frequently Asked Questions
Can I use a different battery size if I cannot find the exact one?
No. Different battery sizes have different voltages and dimensions, and using the wrong size can damage the fob or cause it to malfunction. Always use the exact battery type stamped on the old battery or listed in your manual. If you cannot find it locally, order it online — it will arrive in one or two days.
How long does a new key fob battery last?
A new battery typically lasts three to four years in normal use. Heavy use — pressing buttons many times per day — can shorten that to two or three years. If you use your fob less often, the battery may last five years or longer. When it starts to fail, you will notice the fob only works when you hold it close to the car.
What if I drop the fob in water?
Water damage can corrode the battery contacts and circuit board inside the fob. If your fob gets wet, remove the battery when ready and let both the fob and battery dry completely for 24 hours in a warm, dry place. Then reinstall the battery and test it. If it still does not work, the internal damage is likely permanent and you will need a replacement fob.
Do I need to reprogram my car after I replace the fob battery?
No. Replacing the battery does not erase the fob's programming. Your car will recognize the fob as soon as the new battery is installed. Reprogramming is only necessary if you buy a brand-new fob that has never been paired to your car before.
Can I replace the battery in a smart key or push-button fob?
Yes, the process is the same. Smart keys and push-button fobs contain the same coin-cell batteries as traditional fobs. Open the fob the same way, replace the battery, and close it back up. The fob will work when ready without any reprogramming needed.