You can replace most key fob batteries yourself with a coin and a new battery from any pharmacy or supermarket
A dead key fob battery is one of the easiest car problems to fix yourself. The battery inside your fob is a small, coin-shaped cell—usually a CR2032, CR2025, or similar—that costs between $3 and $8. You do not need tools beyond a coin or flathead screwdriver, and the whole job takes about five minutes. The fob will work exactly as it did before once the new battery is in.
The real challenge is knowing which battery your fob uses and how to open the case without breaking it. Different manufacturers design their fobs differently, so the steps vary slightly. But the principle is always the same: pry the case open, remove the old battery, drop in the new one, and snap it closed.
Key Takeaways
- Most key fob batteries are CR2032 or CR2025 cells available at any pharmacy, grocery store, or dollar store for under $10.
- You can open most fobs by inserting a coin into a slot on the edge and twisting gently, or by prying with a flathead screwdriver.
- The battery sits in a small metal holder; note which side faces up before you remove it so you install the new one the same way.
- If your fob does not open easily or you cannot find a seam, check your owner's manual or search your vehicle's year, make, and model online for fob-specific instructions.
Find out what battery your fob needs
The fastest way to know which battery to buy is to open the fob and look at the old battery itself. The battery type is printed on the flat side—CR2032, CR2025, CR2016, or similar. If the battery is completely dead and you cannot open the fob yet, check your owner's manual. Most manuals list the battery type in the key fob section or in a quick-reference table at the back.
If you do not have the manual, search online for "[your year] [make] [model] key fob battery." You will find the answer in forums, YouTube videos, or the manufacturer's website. Once you know the type, buy a replacement at a pharmacy, supermarket, dollar store, or online. Avoid the cheapest generic brands; a quality battery from Energizer, Duracell, or Panasonic costs only a dollar or two more and lasts longer.
Open the fob without damaging the case
Look at the edge of your fob for a small slot or seam. Most fobs have a slot on one side where you can insert a coin—usually a quarter or dime works best. Insert the coin into the slot and twist gently, as if you were opening a battery compartment on a flashlight. Do not force it; if it does not turn easily, you may be twisting the wrong way or looking at the wrong edge.
If there is no slot, look for a seam running around the fob's edge. You can use a flathead screwdriver or a plastic pry tool to gently separate the two halves. Start at one corner and work your way around, explore steady pressure rather than sudden force. The case will pop open once the clips inside release. Some fobs are glued rather than clipped; if yours does not budge after gentle prying, stop and look up your specific model online rather than risk cracking the plastic.
Remove the old battery and install the new one
Once the fob is open, you will see a small metal holder with the battery sitting in it. The battery is usually held in place by the metal tabs of the holder, not glued. Before you remove it, note which side is facing up—the flat side with the printed numbers, or the smooth domed side. This matters because the battery will only work if it is installed the correct way.
Gently pry the battery out using your fingernail or the edge of the coin you used to open the fob. Drop the new battery into the holder with the same side facing up as the old one. You should hear or feel a small click as it seats into place. If it does not sit flat or feels loose, remove it and try again; the battery should fit snugly without any wiggling.
Close the fob and test it
Align the two halves of the fob and press them together firmly until you hear a click. If your fob opened via a coin slot, you can twist the coin in the reverse direction to lock it closed. If it opened by prying, the clips should snap back into place on their own once the halves are pressed together.
Stand a few feet away from your car and press a button on the fob. The lights should flash or you should hear the locks click. If nothing happens, open the fob again and check that the battery is seated correctly and facing the right direction. If the fob still does not work after you have confirmed the battery is installed correctly, the problem may be with the fob's circuit board rather than the battery, and you will need a replacement fob from your dealer or a locksmith.
What to do if the fob still will not open
Some fobs are designed to be opened only by a dealer or locksmith, or they are sealed so tightly that prying risks breaking them. If you have tried gentle prying and twisting without success, stop. Forcing it will crack the plastic or damage the internal circuit board, and then you will need to replace the entire fob instead of just the battery.
Search online for your vehicle's year, make, and model plus "key fob battery replacement" to see if there are videos or instructions specific to your fob. If you find nothing or the instructions look difficult, contact your car's dealer or a local locksmith. Many locksmiths will replace the battery for $10 to $20, which is reasonable insurance against breaking a $200 fob.
Why key fob batteries die and how often to replace them
Key fob batteries die because you use them. Every time you press a button, the fob sends a radio signal to your car's receiver. Over months and years, this drains the battery. Most fob batteries last between three and four years under normal use, though some last longer and some shorter depending on how often you use the fob and the quality of the battery.
You cannot prevent a battery from dying, but you can extend its life slightly by not leaving the fob in direct sunlight or extreme heat, and by not dropping it or exposing it to moisture. Once the battery is dead, replacing it is the only solution. There is no way to recharge a disposable fob battery, and leaving a dead battery in the fob for months can cause it to leak and damage the circuit board inside.
Frequently Asked Questions
Can I use a different battery type if I cannot find the exact one?
No. Different battery types have different voltages and sizes. A CR2032 and a CR2025 look similar but are not interchangeable. Using the wrong battery can damage the fob's circuit board or cause it to malfunction. Buy the correct type; it is inexpensive and widely available.
What if the battery is stuck in the holder and I cannot pry it out?
Do not force it. If the battery is corroded or stuck, try using a plastic spoon or a plastic pry tool instead of your fingernail or a metal coin. If it still will not budge, leave it alone and take the fob to a locksmith or dealer. Damaging the metal holder inside the fob can make the fob unusable.
Do I need to reprogram my fob after replacing the battery?
No. The battery powers the fob, but it does not store the programming code. Your car's receiver already knows your fob's code, so once the battery is replaced and the fob turns on, it will work when ready without any reprogramming.
Is it safe to handle the battery with my bare hands?
Yes. Coin-cell batteries are safe to touch with bare hands. You do not need gloves. Avoid touching the battery contacts with dirty or wet fingers, as this can cause corrosion, but normal handling is fine.
What should I do with the old battery?
Take it to a battery recycling program or drop it off at a retailer that accepts batteries, such as Best Buy or Home Depot. Many pharmacies and supermarkets also have battery recycling bins near the customer service desk. Do not throw it in the trash.