Rear view mirror replacement is usually a straightforward job you can do yourself or have a shop handle in under an hour

A rear view mirror can fail in several ways: the glass can crack or fall out of its housing, the mirror itself can detach from the mounting bracket, or the internal adjustment mechanism can break. Most replacements fall into one of three categories: replacing just the glass, replacing the mirror head (the whole assembly), or replacing the entire mounting bracket and arm. The cost and difficulty depend on which part failed and whether your mirror has power adjustment, heating, or a built-in camera or display.

You can often replace the glass or mirror head yourself with basic tools. Full bracket replacement usually requires drilling or unbolting from inside the door or cabin, which is more involved but still manageable. If you're not comfortable working with your car's interior panels or drilling, a body shop or dealership can do it in an hour or two.

Key Takeaways

  • Replacement glass inserts cost $15 to $50, mirror head assemblies run $40 to $150, and full bracket replacements with labor can reach $200 to $400 depending on whether the mirror has power features.
  • You can identify what failed by checking whether the glass is loose, the mirror head rocks on its bracket, or the entire arm moves when it shouldn't.
  • Replacement glass and mirror heads are available at auto parts stores, online retailers, and dealerships, and most fit multiple vehicle models if you match the shape and mounting type.
  • Removing the old mirror usually involves prying out the glass, unbolting the head from its bracket, or unbolting the bracket from the door or windshield frame.
  • Power mirrors, heated mirrors, and mirrors with integrated cameras require matching the connector type and may need reprogramming or recalibration after installation.

Identifying which part of your mirror needs replacement

Start by determining what actually failed. If the mirror glass is cracked, cloudy, or loose in its frame but the mirror head itself is solid and doesn't rock, you need only replacement glass. If the glass is fine but the entire mirror head moves or won't stay in position when you adjust it, the bracket holding the head is worn or broken. If the arm connecting the mirror to the door or windshield is bent, loose, or won't hold position, the mounting bracket itself has failed.

Check whether your mirror has power adjustment by looking for a small rocker switch or dial on the door panel. If it does, note whether the adjustment still works—a working motor with a loose mirror head is different from a failed motor. Similarly, check if your mirror has a heating element (usually indicated by a small grid pattern on the glass or a defroster button on the door panel) or an integrated camera or display. These features affect which replacement parts will work and whether you need to transfer components from the old mirror to the new one.

Replacement glass inserts and how to install them

Replacement mirror glass is the cheapest and easiest fix if only the glass itself is damaged. The glass sits in a plastic or metal frame that clips or glues into the mirror head. You can buy replacement inserts at auto parts stores, online retailers, or dealerships for $15 to $50 depending on whether the glass is heated or has a special coating.

To replace the glass, first try prying it out gently with a plastic trim tool or old credit card—many clips release with light pressure. If it's glued, you may need to carefully work a thin blade around the edge to break the adhesive. Once the old glass is out, clean any remaining adhesive or debris from the frame. The new glass usually clips in or comes with adhesive strips; follow the instructions that come with it. Press it firmly into place and let any adhesive cure for the time specified before using the mirror.

If your mirror is heated, the new glass must have the heating element already installed. If your old mirror had a special anti-glare or blue-tinted coating and you want to keep that feature, order the replacement glass with the same coating rather than plain glass.

Replacing the mirror head assembly

If the mirror head itself is damaged, cracked, or won't hold its adjustment, you can replace the entire head without touching the mounting bracket. The head bolts or clips to the bracket with one or two fasteners, usually accessible from behind the mirror or from inside the door panel. You'll need a socket set, screwdriver, or hex key depending on your vehicle.

First, locate the fasteners holding the mirror head to its bracket. On most vehicles, you can access them by reaching behind the mirror from outside the car or by removing the interior door panel. Unbolt or unclip the old head and set it aside. If your old mirror has power adjustment, a heating element, or a camera, you may be able to transfer these components to the new head, or you may need to buy a replacement head with the same features already installed.

Align the new mirror head with the bracket and bolt it in place. If the new head has power or heating features, connect the wiring harness before fully tightening the bolts. Test the adjustment and heating (if equipped) before closing up the door panel. Replacement mirror heads cost $40 to $150 depending on features and vehicle model.

Replacing the mounting bracket

A bent or broken mounting bracket requires more work because the bracket bolts to the door frame or windshield pillar from inside the vehicle. You'll need to remove interior trim panels to access the bolts, which usually means removing the door panel, the windshield trim, or both depending on where the bracket mounts.

On door-mounted mirrors, remove the interior door panel by prying off trim clips and unbolting the panel from the door frame. The bracket bolts will be visible on the inside of the door. Unbolt them (usually three to four bolts), disconnect any wiring for power or heating, and remove the old bracket. Install the new bracket in reverse order, ensuring it's aligned before fully tightening the bolts. On windshield-mounted mirrors, you'll need to remove windshield pillar trim to access the bolts from inside the cabin.

This job is more time-consuming than replacing just the glass or head, and if you're not comfortable removing interior panels, a body shop can do it in one to two hours. Labor costs typically run $100 to $200 on top of the bracket cost.

Power mirrors, heated mirrors, and integrated features

If your mirror has power adjustment, a heating element, or an integrated camera or display, the replacement part must match the original in connector type and feature set. A power mirror won't work if you install a manual mirror head, and a heated mirror requires the heating element to be present in the replacement glass.

When ordering a replacement, provide your vehicle's year, make, and model to may support you get the correct connector type. If you're replacing only the glass or head and transferring the old bracket, the new part must match the old one's wiring. If you're replacing the entire assembly, order a complete unit with all the features you need already installed.

After installation, power mirrors may need to be recalibrated or reprogrammed. Some vehicles do this automatically the first time you adjust the mirror; others require a specific button sequence or a diagnostic tool. Check your owner's manual or ask the shop performing the work whether recalibration is needed. Integrated cameras may also need to be recalibrated to the windshield frame for proper image alignment.

Where to buy replacement mirrors and parts

Replacement mirror glass, heads, and brackets are available from several sources. Auto parts chains like AutoZone, O'Reilly, and NAPA stock common replacement glass and heads for popular vehicles and can often have them in stock the same day. Online retailers like Amazon and RockAuto offer wider selection and sometimes lower prices, but you'll wait for shipping. Dealerships have the exact part for your vehicle but typically charge more than aftermarket suppliers.

When ordering, have your vehicle's year, make, model, and body style ready—mirror fitment varies between trim levels and generations. If you're unsure whether a part will fit, call the supplier or check the product listing for compatibility information. Some replacement mirrors are universal or fit multiple models, but these are less common and may not have all the features of your original mirror.

When to do it yourself versus when to use a shop

Replacing mirror glass or a mirror head is a job most people can do at home with basic tools and an hour of time. You need a screwdriver or hex key, possibly a plastic trim tool, and patience. If you're comfortable removing interior panels or reaching behind the mirror, you can handle it.

Full bracket replacement or work involving power mirror wiring is more involved. If you're not comfortable removing door panels or drilling holes, or if your mirror has complex wiring or integrated features, a body shop or dealership is the safer choice. Expect to pay $100 to $300 in labor depending on the job's complexity and your location. A dealership will charge more than an independent shop but can may provide the part and installation match your vehicle's specifications.

Frequently Asked Questions

Can I drive with a cracked rear view mirror?

Legally, it depends on your state, but most states require at least one working mirror to see behind you. A cracked mirror that still reflects an image is usually legal, but a mirror that's shattered or missing is not. Check your state's vehicle code or ask a local police officer. Regardless of legality, a damaged mirror reduces visibility and should be repaired soon.

How long does mirror replacement take at a shop?

Replacing just the glass or mirror head typically takes 30 minutes to an hour. Full bracket replacement takes one to two hours because the technician must remove interior panels and access bolts from inside the door or cabin. Power mirror wiring or recalibration may add 15 to 30 minutes.

Will a universal replacement mirror work on my car?

Universal mirrors are designed to fit multiple vehicle models by using adjustable brackets or common mounting patterns. They work, but they may not match your original mirror's appearance, features, or fit as precisely as an OEM or model-specific replacement. Check the product listing for your vehicle's compatibility before ordering.

Do I need to reprogram my mirror after replacing it?

Most manual mirrors need no programming. Power mirrors may need recalibration—some vehicles do this automatically when you first adjust the mirror, while others require a button sequence or a shop's diagnostic tool. Check your owner's manual or ask your technician. Integrated cameras almost always need recalibration to align properly with the windshield.

What if my mirror keeps falling off after I replace it?

The bracket may be bent, the bolts may not be tight enough, or the new mirror head may not be fully seated on the bracket. Tighten all bolts firmly and check that the head clips or bolts fully into place. If it still moves, the bracket itself may be damaged and need replacement rather than just the head.