What Superlift suspension does to your truck
Superlift is a brand that makes complete suspension kits designed to lift the frame of your truck higher off the ground. A Superlift kit replaces your factory springs, shocks, and related components with heavier-duty parts that sit taller, raising your truck's ride height by 4 to 6 inches depending on which kit you choose. The result is more ground clearance under the frame and axles, which lets you fit larger tires and navigate rough terrain without the undercarriage scraping.
The company manufactures kits for specific truck models—mainly Ford, Chevrolet, GMC, and Dodge—and each kit is engineered to work with that truck's frame geometry and weight distribution. Superlift kits are not universal bolt-ons; they are model-specific systems that include new coil springs or leaf springs, shock absorbers, control arms, track bars, and sometimes new brake lines and driveshaft components to account for the changed angles.
Key Takeaways
- Superlift kits raise your truck's frame 4 to 6 inches and require replacement of springs, shocks, control arms, and related steering components—not just a spacer or spring swap.
- Installation takes 8 to 16 hours at a shop and involves realigning the suspension geometry, which affects how your truck handles and wears tires.
- A lifted truck will have a higher center of gravity, which increases rollover risk in sharp turns and reduces braking stability on slopes.
- Superlift kits cost between $1,500 and $4,000 for parts alone, plus labor, and you will need new tires, wheels, and possibly a driveshaft to match the new height.
- Lifting changes your truck's warranty status, affects insurance rates, and may violate local vehicle height or bumper regulations depending on your state.
How the suspension geometry changes when you lift
When you raise the frame, every angle in the suspension changes. The control arms—the metal links that connect the wheel hub to the frame—no longer sit at the factory angle. The track bar, which controls side-to-side movement of the axle, also changes angle. The steering linkage, which connects the steering box to the wheels, is now at a different pitch. If you do not correct these angles, your truck will pull to one side, your tires will wear unevenly, and your steering will feel loose or unresponsive.
Superlift kits include new control arms and track bars that are longer or angled differently than the factory parts, so the suspension geometry stays close to the original design intent. After installation, a shop must perform a wheel alignment—measuring and adjusting the camber (tilt of the wheel), caster (forward or backward lean), and toe-in (whether the wheels point straight ahead)—to bring these angles back into spec. Without alignment, you will burn through tires in 10,000 to 15,000 miles instead of 50,000.
What changes about how your truck drives
A lifted truck handles differently than a stock truck, and the difference is most noticeable in turns and on slopes. The higher your frame sits, the higher your center of gravity becomes. In a sharp turn at highway speed, that higher center of gravity makes the truck more likely to roll. The weight of the vehicle is now farther from the ground, so the same turn that felt stable in a stock truck can feel unstable in a lifted one. This is not a theoretical risk; rollover is a real consequence of lifting, especially on two-lane roads with tight curves.
Braking also changes. When you brake hard, the weight of the truck shifts forward, compressing the front suspension. In a lifted truck with stiffer springs, that compression is less pronounced, which means the front end does not squat as much. This can make the rear wheels more likely to lock up on a slope or slippery surface, reducing your control. Superlift kits use heavier springs and shocks designed to handle the extra weight and height, but they do not eliminate these physics—they just manage them better than a spacer lift would.
Installation, labor, and what happens to your warranty
Installing a Superlift kit is not a backyard job. The work involves removing the frame from the vehicle, unbolting the entire suspension, installing new springs and shocks, installing new control arms and track bars, reconnecting brake lines and the driveshaft, and then aligning the wheels. A shop with experience in suspension work will charge 8 to 16 hours of labor, depending on the truck model and whether complications arise. Some shops charge $100 to $150 per hour, so labor alone can run $800 to $2,400.
Installing a Superlift kit will void the suspension and steering portions of your factory warranty. Some dealers will refuse to work on the truck at all once a lift is installed, because the changed suspension geometry can affect how other systems perform. Your truck's ride height also affects your speedometer accuracy (taller tires roll a larger circumference, so your actual speed is slightly higher than the speedometer reads) and your engine's emissions readings. Check your state's vehicle inspection rules before lifting; some states have maximum bumper height or overall vehicle height limits that a lifted truck might exceed.
Tires, wheels, and drivetrain components you will need
A Superlift kit raises your frame, but it does not automatically give you bigger tires. The factory wheels and tires will fit in the new wheel wells, but most people lift their truck specifically to fit larger tires for off-road capability or appearance. Larger tires cost $150 to $300 each, and new wheels cost $200 to $600 each depending on material and finish. A full set of four tires and wheels can easily run $2,000 to $3,000.
The driveshaft—the spinning shaft that connects the transmission to the rear axle—may need to be shortened or replaced when you lift the truck. As the frame rises, the angle between the transmission output and the rear axle input changes. If the driveshaft is too long, it will bind or vibrate at certain speeds. A custom driveshaft costs $400 to $800. Some Superlift kits include driveshaft modifications in the box; others require you to order it separately or have a driveshaft shop make one.
Cost breakdown and insurance impact
A Superlift kit for a full-size truck costs between $1,500 and $4,000 depending on the model and how many components are included. Add $800 to $2,400 for installation labor. Add $400 to $800 for a driveshaft. Add $2,000 to $3,000 for new tires and wheels if you want to go larger. A complete lift job, from kit to tires to installation, typically runs $5,000 to $10,000 or more.
Your insurance company should be notified of the lift. Some insurers will not increase your premium; others will add 5 to 15 percent to your collision and comprehensive coverage because the truck is now worth more and is at higher risk of rollover. Some insurers will deny a claim if you were in an accident and did not disclose the lift. Call your agent before you order the kit and ask whether the lift will affect your rate or coverage.
Superlift versus other lifting methods
A Superlift kit is a body lift or suspension lift depending on the model. A body lift raises only the truck's cab and bed, leaving the frame and axles in place; it is cheaper and simpler but does not increase ground clearance under the axles. A suspension lift, which is what most Superlift kits are, raises the entire frame and axles by replacing the springs and suspension components. This gives you real ground clearance gains and is necessary if you plan to do serious off-roading.
Other brands make suspension lifts too—Rough Country, BDS, Fabtech, and Icon are common alternatives. Superlift kits are generally considered well-engineered and durable, with good customer support, but they are not the cheapest option. A budget lift kit from Rough Country might cost $1,000 to $1,500 less, but it may use lighter-duty components or require more tuning to ride smoothly. A high-end kit from Icon or BDS might cost $2,000 to $3,000 more but will include adjustable shocks and finer geometry control.
Frequently Asked Questions
Will a Superlift kit make my truck ride rougher?
Not necessarily. Superlift kits include shocks designed for the new ride height and spring rate, so the ride quality can be similar to stock if the kit is installed correctly and aligned properly. However, stiffer springs do transmit more road vibration to the frame, so some roughness is typical. Aftermarket shocks with adjustable damping can smooth this out but add cost.
Can I install a Superlift kit myself?
If you have a lift and a full suspension tool set, yes, but it is not recommended. The work requires removing the frame, precise torque specifications on critical fasteners, and a wheel alignment afterward. A mistake can result in poor handling, tire wear, or brake failure. Most people have a shop do it.
Do I need to replace my driveshaft when I lift?
Depends on the lift height and your truck model. A 4-inch lift often requires a driveshaft modification; a 2-inch lift might not. Check the Superlift kit documentation for your specific truck, or ask the shop during the estimate.
Will lifting my truck affect its resale value?
It depends on the buyer. Some truck buyers want a lifted truck and will pay more; others see it as a modification that voids warranty and increases wear. A well-done lift with quality parts and documentation usually holds value better than a cheap one.
What is the difference between a Superlift and a spacer lift?
A spacer lift uses rubber or metal spacers between the spring and the frame to raise the truck without replacing the springs. It is cheaper ($300 to $800) but does not improve suspension geometry or ground clearance under the axles. A Superlift is a full suspension replacement and costs more but handles and performs better.