Skyjacker is an aftermarket suspension brand that lifts your vehicle and changes how it handles
Skyjacker makes suspension components — primarily lift kits, shocks, and springs — designed to raise a truck or SUV higher off the ground than it came from the factory. The company has been in business since 1974 and focuses mainly on trucks and Jeeps. A Skyjacker lift kit replaces or modifies your factory suspension to add height, typically between 2 and 6 inches depending on the kit you choose.
The core trade-off is straightforward: you gain ground clearance and a more aggressive stance, but you also change how your vehicle rides, steers, and stops. Skyjacker kits are not a bolt-on-and-forget modification. They require professional installation, affect your alignment, and can impact your warranty. Whether a Skyjacker suspension makes sense depends on what you actually do with your vehicle and how much you are willing to spend.
Key Takeaways
- Skyjacker lift kits range from 2 to 6 inches of height and cost between $800 and $3,000 before installation labor, which typically runs $1,000 to $2,500.
- Lifting your suspension changes your vehicle's center of gravity, which affects braking distance, cornering stability, and fuel economy — usually making all three worse.
- Skyjacker makes both coil spring and leaf spring kits, and the right choice depends on your vehicle's factory suspension type and how you plan to use it.
- Professional installation is required; attempting a lift kit yourself can damage your vehicle's steering, braking, and drivetrain components.
- A lifted vehicle may not fit in standard parking spaces or under low clearances, and some states have regulations about how high you can lift a truck.
How Skyjacker lift kits work and what they replace
A Skyjacker lift kit raises your vehicle by replacing or modifying the springs and shocks that support your vehicle's weight. The most common type is a coil spring lift, which replaces your factory coil springs with taller ones and pairs them with longer shocks. This is the standard approach for most modern trucks and SUVs. The second type is a leaf spring lift, used on trucks with leaf spring rear suspensions, which adds additional leaves or replaces the entire spring pack.
Some Skyjacker kits are "spacer lifts," which insert a spacer between your factory spring and the frame to add height without replacing the spring itself. These are cheaper but offer less control over how your vehicle rides. Most Skyjacker kits sold today are full coil spring replacements, which give you more adjustability and a smoother ride than spacers.
The installation process involves removing your wheels, disconnecting your factory suspension, installing new springs and shocks, and then having your alignment reset. This is not a weekend project for a home mechanic. A shop will charge $1,000 to $2,500 in labor depending on your vehicle and the kit complexity. Some shops bundle the kit and labor into a single price; others charge separately.
Cost breakdown: kit price, installation, and hidden expenses
A Skyjacker lift kit itself costs between $800 and $3,000, depending on how much height you want and whether you are lifting the front, rear, or both. A basic 2-inch kit for a common truck might run $800 to $1,200. A 4-inch kit for the same truck could be $1,500 to $2,200. A full 6-inch system with premium shocks can exceed $3,000.
Installation labor typically adds $1,000 to $2,500. A few shops offer flat rates; most charge hourly labor. The total out-of-pocket cost for a moderate lift — say, 3 inches — usually lands between $2,500 and $4,000 installed.
Beyond the kit and labor, budget for alignment ($150 to $300), new tires if your current ones no longer fit ($600 to $1,500 for a set), and potentially new brake lines or extensions if your lift is more than 4 inches ($200 to $500). If your vehicle is still under warranty, a lift kit will void the suspension and drivetrain portions of that warranty. Some shops offer warranties on their installation work, but Skyjacker does not cover damage caused by off-road use or poor maintenance.
How lifting changes your vehicle's handling, braking, and fuel economy
Raising your vehicle's center of gravity makes it less stable in corners and more prone to body roll. This is physics, not opinion. A lifted truck will lean more in a turn than a stock truck, and at highway speeds this can feel unsettling. Skyjacker kits with quality shocks and sway bars help mitigate this, but they do not eliminate it. If you drive mostly on highways and rarely off-road, a lift kit is a trade-off you are making for appearance rather than function.
Braking distance increases slightly with a lift kit, especially if you also install larger tires. Your vehicle has more mass to stop, and the higher center of gravity means weight transfers forward more aggressively during braking. The difference is usually 5 to 10 percent longer stopping distance, which matters most in emergency stops. Fuel economy typically drops 1 to 3 miles per gallon, depending on the height of the lift and the aerodynamics of your new tire and wheel setup.
Steering feel also changes. A lifted vehicle sits higher, which can make the steering feel less responsive and more vague. Quality Skyjacker kits with adjustable shocks and proper alignment can minimize this, but it is not something you can fully eliminate. If you value precise steering and tight handling, a lift kit is working against you.
Skyjacker kits for different vehicle types and suspension styles
Skyjacker makes kits for most common trucks and SUVs: Ford F-150, Chevrolet Silverado, Dodge Ram, Jeep Wrangler, and Toyota Tacoma are among the most popular. Before you buy, confirm that a kit exists for your specific year and model. A kit for a 2020 F-150 will not fit a 2015 F-150; suspension geometry changes year to year.
The type of kit you need depends on your vehicle's factory suspension. Trucks with coil springs (most modern full-size trucks) use coil spring lift kits. Trucks with leaf springs (some older trucks and some current models) need leaf spring kits. Jeeps and some SUVs use different suspension designs, and Skyjacker makes kits tailored to each. Installing the wrong kit type will not work and can damage your vehicle.
Skyjacker also offers different shock options within the same lift height. A basic kit comes with standard shocks; a premium kit comes with adjustable shocks that let you fine-tune ride height and damping. The adjustable shocks cost more but give you better control over how your vehicle rides and handles. If you plan to tow or carry heavy loads, adjustable shocks are worth the extra cost.
Installation requirements and why DIY is not recommended
A Skyjacker lift kit requires specialized tools and knowledge to install correctly. Your suspension supports your entire vehicle's weight and connects to your steering and braking systems. If any component is installed incorrectly, your vehicle can become unsafe to drive. Improper installation can cause uneven tire wear, steering problems, brake failure, or drivetrain damage.
A professional shop will have a lift, alignment equipment, and experience with your specific vehicle. They can identify problems during installation — like a bent frame or worn components — that a home mechanic might miss. They will also reset your alignment after installation, which is essential. Skyjacker does not recommend DIY installation, and most shops will not warranty a kit that was not professionally installed.
If you are considering installation yourself, the cost savings are not worth the risk. A mistake can cost thousands to fix and make your vehicle unsafe. Use a shop that specializes in suspension work and has experience with Skyjacker kits on your vehicle type.
Legal and practical limits on how high you can lift
Some states and counties have regulations on how much you can lift a vehicle. These rules vary widely. Some states cap lift height at 4 inches; others allow up to 6 inches or more. A few states have no limit. Before you buy a 6-inch kit, check your state's vehicle code or call your local DMV to confirm what is legal where you drive.
Beyond legality, practical limits exist. A lifted vehicle may not fit in standard parking garages, under low overpasses, or in some car washes. If you park in a garage or drive under low clearances regularly, a 4-inch lift is the practical maximum. A 6-inch lift is best suited to trucks that spend most of their time on open roads and in open parking areas.
Insurance companies may also flag a lifted vehicle. Some insurers charge higher premiums for lifted trucks; others require notification before you lift. Call your insurer before you buy the kit to confirm their policy. A few insurers will not cover a lifted vehicle at all, so this is worth checking.
Frequently Asked Questions
Will a Skyjacker lift kit void my vehicle's warranty?
Yes, it will void the suspension and drivetrain portions of your factory warranty. Other systems — engine, transmission, electrical — remain covered unless the lift kit directly caused the failure. Some aftermarket warranties cover Skyjacker kits, but you need to purchase them separately and they are not as comprehensive as a factory warranty.
Can I install a Skyjacker kit myself if I have suspension experience?
Skyjacker does not recommend DIY installation, and most shops will not warranty a kit you install yourself. Suspension work requires alignment equipment and specialized knowledge. A mistake can make your vehicle unsafe. Professional installation costs $1,000 to $2,500, but it is worth it for safety and warranty coverage.
How much will my fuel economy drop after a lift kit?
Most owners report a 1 to 3 mile-per-gallon decrease, depending on lift height and tire size. A 2-inch lift with stock tires has minimal impact; a 6-inch lift with 35-inch tires can drop fuel economy by 3 to 5 mpg. Over a year, this adds up to several hundred dollars in extra fuel costs.
Do I need new tires after lifting my truck?
Not always. A 2-inch lift usually fits your factory tires. A 4-inch lift may require tires one size larger. A 6-inch lift almost always requires larger tires. Larger tires cost more, wear faster, and reduce fuel economy further. Factor tire cost into your total lift budget.
What is the difference between a Skyjacker coil spring kit and a spacer lift?
A coil spring kit replaces your factory springs with taller ones, giving you a smoother ride and better control. A spacer lift inserts a spacer between your factory spring and frame, adding height without replacing the spring. Spacer lifts are cheaper but ride harsher and offer less adjustability. Most modern Skyjacker kits are coil spring replacements.