Shock strut replacement typically runs $300 to $1,000 per strut at a shop, depending on your vehicle and which part fails

A shock strut is a single assembly that combines the shock absorber and the spring into one unit, common on front suspensions. When one fails, you usually replace the whole strut rather than just the internal shock. The total bill depends on three things: whether you're replacing one or both sides, what your vehicle costs to work on, and whether the shop finds related damage while it's apart.

Most shops charge between $150 and $400 per strut in labor, plus the part itself at $150 to $600 depending on whether you choose an original manufacturer part, an aftermarket equivalent, or a rebuilt unit. A typical two-strut job on a sedan runs $600 to $1,200 total. Luxury vehicles, trucks, and all-wheel-drive cars often cost more because the work takes longer or the parts are pricier.

Key Takeaways

  • Labor for one strut replacement usually costs $150 to $400 at a shop, and the part itself ranges from $150 to $600 depending on quality level.
  • Most vehicles need both front struts replaced at the same time, even if only one has failed, because the other is usually worn and will fail soon after.
  • Rebuilt struts cost less upfront but may have a shorter lifespan than new aftermarket or OEM parts, so compare warranty length when getting quotes.
  • Shops often discover additional suspension work needed once the strut is removed, such as replacing the strut mount or bearing, which adds $100 to $300 per side.

Why both struts usually need replacement at once

Struts wear at roughly the same rate on both sides of the vehicle. If the left front strut has failed, the right front strut is typically near the end of its life too. Replacing only one side leaves you with uneven suspension performance and can cause handling problems or uneven tire wear within weeks.

Shops will often recommend replacing both at once, and most mechanics will do so without asking. If a shop quotes you for a single strut, ask whether they recommend doing both and why. The extra cost of a second strut is usually $300 to $600 more than a single replacement, which is far cheaper than returning for the second one a few months later.

How part choice affects your total cost

You have three options when ordering the strut itself: original equipment manufacturer (OEM), aftermarket new, or rebuilt. OEM parts carry the vehicle maker's name and typically cost the most—$400 to $600 per strut—but come with the longest warranty, often three years or unlimited miles. Aftermarket new parts from brands like Monroe or KYB run $200 to $400 and usually carry a one- to three-year warranty. Rebuilt struts cost $150 to $250 but may have a warranty of only one year or 12,000 miles.

The cheapest option isn't always the worst choice if you plan to sell the car soon or keep it only a few more years. But if you own the vehicle long-term, the difference between a $250 rebuilt strut and a $350 aftermarket new one often pays for itself in peace of mind and fewer repeat visits. Ask the shop what warranty comes with each option and whether they stand behind it if the part fails.

Additional work discovered during strut replacement

Once a strut is removed, the shop can see parts that were hidden before. The strut mount—the bearing that lets the strut rotate with steering—often needs replacement at the same time, adding $100 to $200 per side in parts and labor. The sway bar link or control arm bushing may also be worn and visible only once the strut is out.

This isn't a trick to inflate your bill; these parts genuinely wear together and are easier to replace while the strut is already apart. Before authorizing extra work, ask the shop to show you the worn part or take a photo. A reputable shop will explain why the part needs replacement and what happens if you skip it. If you're uncomfortable, you can decline and have the shop reinstall the old part, though this is rare.

Labor costs vary widely by vehicle type and location

A strut replacement on a Honda Civic takes a shop about one hour per side, while the same job on a BMW or Audi may take two to three hours because of the car's design or the need to remove additional components. Shops charge either a flat rate per job or an hourly rate, typically $75 to $150 per hour depending on the region and shop type.

Location matters significantly. A dealership in a major city may charge $150 to $200 per hour, while an independent shop in a smaller town might charge $75 to $100. Chain shops like Firestone or Midas usually fall in the middle. Get quotes from at least two shops before committing, and ask each one how long they estimate the job will take so you can compare labor rates fairly.

When to replace struts versus when to wait

Struts typically last 50,000 to 100,000 miles, though this varies by driving conditions and vehicle. Signs of failure include a bouncy or floating ride, clunking noises over bumps, uneven tire wear, or visible fluid leaking from the strut itself. If you notice any of these, have the strut inspected soon—a failed strut can affect braking distance and handling in an emergency.

If a shop recommends strut replacement but you don't notice any symptoms, ask them to show you the wear or explain the specific problem they found. Some shops recommend replacement as preventive maintenance, which may or may not be necessary depending on your vehicle's age and mileage. You can also get a second opinion from another shop if you're unsure.

Comparing shop types and getting accurate quotes

Dealerships, chain shops, and independent mechanics all do strut work, and the cost difference can be substantial. Dealerships typically charge the most but use OEM parts and have factory training for your specific vehicle. Chain shops offer middle-ground pricing and usually stock common aftermarket parts. Independent shops often charge less in labor but may have longer wait times.

When you call for a quote, provide your vehicle's year, make, model, and current mileage. Ask whether the quote includes both struts or just one, what brand of part they use, what warranty comes with the work, and whether they've found any additional suspension issues during inspection. A written quote is better than a phone estimate because it locks in the price and lets you compare apples to apples across shops.

Frequently Asked Questions

Can I replace just one strut instead of both?

Technically yes, but it's not recommended. The unworn strut on the other side will likely fail within weeks or months because it's already aged to match the failed one. You'll end up paying for labor twice. Most shops will advise against it, and some won't do it at all.

What's the difference between a strut and a shock absorber?

A shock absorber is just the damping part that controls bouncing. A strut combines the shock absorber, spring, and steering knuckle mount into one assembly. Most modern cars use struts on the front and shocks on the rear. You can't swap one for the other.

How long does a strut replacement take?

Most shops need one to three hours per side, depending on the vehicle. A straightforward two-strut job on a common sedan might take two to three hours total, while a luxury car or truck could take four to six hours. Ask the shop for their time estimate when you get a quote.

Should I choose rebuilt struts to save money?

Rebuilt struts cost less upfront but may fail sooner than new aftermarket or OEM parts. If you plan to keep the car only a few more years, rebuilt may be fine. For longer ownership, the extra $100 to $150 per strut for a new aftermarket part often makes sense because the warranty is longer and failure is less likely.

What if the shop finds the strut mount also needs replacement?

The strut mount is the bearing that lets the strut rotate with steering, and it wears along with the strut. Replacing it at the same time costs $100 to $200 per side but is usually worth it because you avoid a second trip to the shop. Ask the shop to show you the worn part before you approve the extra work.