What Roadmaster Active Suspension Does

Roadmaster Active Suspension is a supplemental air suspension system made by Roadmaster Inc., designed to level a towed vehicle behind an RV or motorhome. It uses air springs and an onboard compressor to automatically adjust the suspension height as the towed vehicle is loaded or as road conditions change, keeping the towed vehicle level with the tow vehicle and reducing strain on both the towing and towed vehicles.

The system works by monitoring the height of the towed vehicle in real time. When weight shifts — whether from cargo being loaded, passengers getting in, or the road surface changing — the air springs inflate or deflate to maintain a level ride. This prevents the towed vehicle's nose from sagging or the rear from rising excessively, which can damage the frame, affect braking, and put dangerous stress on the tow hitch connection.

Roadmaster Active Suspension is not the same as a standard trailer suspension. It is an aftermarket addition that sits between the towed vehicle's frame and its wheels, replacing or supplementing the factory suspension components. It requires professional installation and is typically used for flat-towing (dinghy towing) behind motorhomes, though some RV owners use it for other towing setups.

Key Takeaways

  • Roadmaster Active Suspension automatically levels a towed vehicle by inflating or deflating air springs in response to weight changes and road conditions.
  • The system reduces frame stress, improves braking performance, and protects both the tow vehicle and towed vehicle from damage caused by uneven weight distribution.
  • Installation requires professional work and involves replacing or modifying the towed vehicle's factory suspension components.
  • The system needs periodic maintenance, including air filter checks and compressor servicing, to function reliably over time.
  • Cost varies widely depending on the vehicle and installer, and not all vehicles are compatible with the system.

How the System Monitors and Adjusts Suspension Height

The Roadmaster Active Suspension system uses height sensors mounted on the towed vehicle's frame to continuously measure the distance between the frame and the wheels. When the sensors detect that the vehicle is no longer level — either because weight has been added, removed, or the road surface has changed — they send a signal to the onboard compressor and control module.

The compressor then inflates or deflates the air springs to restore the vehicle to its target height. This happens automatically and continuously while the vehicle is being towed. The system maintains the towed vehicle at the same height as the tow vehicle, which is critical for safe towing because an uneven connection can cause sway, reduce braking effectiveness, and put excessive stress on the hitch and frame.

The compressor is powered by the towed vehicle's battery or by a dedicated power source connected to the tow vehicle's electrical system. Most systems include a manual override switch so the driver can make adjustments if needed, though the automatic system handles most situations without intervention.

Why Suspension Leveling Matters for Towed Vehicles

When a vehicle is towed without active suspension leveling, its weight distribution changes as soon as it is loaded or as road conditions shift. If the towed vehicle's nose sags too low, the hitch connection angles downward, which can reduce the tow vehicle's braking power and cause the towed vehicle to push or sway. If the rear of the towed vehicle rises too high, the frame can bend or crack over time, and the brake lines and electrical connections can be damaged.

A level connection also improves braking performance. When the towed vehicle is level, its brakes work more effectively because the weight is distributed evenly across all four wheels. An uneven connection can cause one set of brakes to work harder than the other, leading to uneven wear and reduced stopping power in an emergency.

Long-term, an unlevel towed vehicle can develop frame damage, suspension component failure, and alignment problems that are expensive to repair. Roadmaster Active Suspension prevents these issues by maintaining a level connection throughout the towing journey, regardless of how the vehicle is loaded or what road surface it encounters.

Installation and Compatibility Considerations

Roadmaster Active Suspension is not a bolt-on system that a vehicle owner can install at home. It requires professional installation by a technician familiar with RV towing systems, usually at an RV service center or a shop that specializes in towing equipment. The installation process involves removing the towed vehicle's factory suspension components, installing the air springs and height sensors, connecting the compressor and control module, and running electrical lines to power the system.

Not all vehicles are compatible with Roadmaster Active Suspension. The system is designed for specific vehicle models and years, and compatibility depends on the vehicle's frame design, suspension geometry, and available mounting points. Before purchasing the system, you need to confirm that your towed vehicle is on Roadmaster's compatibility list. Your RV dealer or a Roadmaster-certified installer can check this for you.

The installation typically takes several hours to a full day, depending on the vehicle and the complexity of the work. Labor costs vary by region and shop, but installation is usually a significant portion of the total cost. Once installed, the system becomes part of the towed vehicle's suspension and remains in place even when the vehicle is not being towed.

Maintenance and Troubleshooting

Roadmaster Active Suspension requires regular maintenance to function reliably. The most common maintenance task is checking and replacing the air filter on the compressor, which should be done annually or more often if the vehicle is towed frequently or in dusty conditions. A clogged air filter reduces the compressor's efficiency and can cause the system to fail to level the vehicle properly.

The air springs themselves are durable but can develop leaks over time, especially if the vehicle is towed over rough terrain or exposed to extreme temperatures. If you notice that the towed vehicle is no longer leveling properly, or if the compressor runs constantly without achieving the target height, the air springs may need to be inspected or replaced. This is a job for a professional, as it involves depressurizing the system and working with sealed components.

The electrical connections and control module should also be inspected periodically, especially before and after the towing season. Corrosion, loose connections, or damaged wiring can prevent the system from functioning. If the system stops responding or the height sensors are not reading correctly, a technician can diagnose the problem using diagnostic equipment and repair or replace the faulty component.

Cost and Long-Term Value

The cost of Roadmaster Active Suspension varies depending on the vehicle model, the installer, and your location. The system itself typically ranges from $2,000 to $4,000, and installation can add another $1,000 to $2,000 or more. Some RV dealers bundle the system with the towed vehicle purchase, which may offer a slight discount compared to aftermarket installation.

While the upfront cost is significant, many RV owners view it as an investment in the longevity of their towed vehicle. By preventing frame damage, suspension wear, and brake problems, the system can save thousands of dollars in repairs over the life of the vehicle. It also improves safety and ride quality during towing, which is valuable for long-distance RV travel.

If you are considering Roadmaster Active Suspension, compare the cost against the potential repair costs if the vehicle is towed without it. For vehicles that will be towed frequently or over long distances, the system often pays for itself through reduced maintenance and repair expenses.

Alternatives to Roadmaster Active Suspension

If Roadmaster Active Suspension is not compatible with your towed vehicle or if the cost is prohibitive, there are other options to consider. Some RV owners use passive air suspension systems, which use air springs but do not automatically adjust height — instead, they require manual adjustment before towing. These systems are less expensive but require more driver attention and do not respond to changes in weight or road conditions during towing.

Another option is to use a weight-distribution hitch, which spreads the towing load across more of the tow vehicle's frame and can reduce some of the stress on the connection. However, a weight-distribution hitch does not level the towed vehicle the way active suspension does, and it is not a substitute for proper suspension management on the towed vehicle itself.

Some newer RV tow vehicles come with integrated electronic suspension systems that can work in conjunction with aftermarket towed-vehicle suspension systems. If your tow vehicle has this capability, discuss it with your RV dealer or installer to see whether it can be coordinated with Roadmaster Active Suspension or another system.

Frequently Asked Questions

Can I install Roadmaster Active Suspension myself?

No. The system requires professional installation because it involves modifying the towed vehicle's suspension, installing air springs and sensors, and connecting electrical components. Improper installation can damage the vehicle and create safety hazards. Use a certified Roadmaster installer or an RV service center with experience in towing systems.

How often does the compressor run?

The compressor runs as needed to maintain the target height. On a typical towing day, it may run several times as weight is added or removed and as road conditions change. It should not run continuously; if it does, the system may have a leak or a sensor problem that needs professional diagnosis.

Will Roadmaster Active Suspension work with my vehicle?

Compatibility depends on your vehicle's make, model, and year. Roadmaster publishes a compatibility list, and you can check it on their website or ask your RV dealer. If your vehicle is not on the list, a professional installer may be able to adapt the system, but this is not may provide and may cost more.

What happens if the compressor fails while I am towing?

If the compressor fails, the air springs will gradually lose pressure and the towed vehicle will sag. You should stop towing as soon as it is safe to do so and have the system inspected. Continuing to tow with a failed compressor can damage the frame and suspension components. Most systems include a manual override or bypass option for emergency situations.

How long does Roadmaster Active Suspension last?

With proper maintenance, the system can last 10 to 15 years or longer. The air springs are the most likely component to need replacement, typically after 8 to 12 years of regular use. The compressor and control module are usually more durable, but they can fail if not maintained or if exposed to extreme conditions.