Ridetech is an aftermarket suspension manufacturer that replaces or upgrades your car's stock suspension system

Ridetech makes complete suspension kits and individual components designed to replace the suspension that came with your vehicle from the factory. Their products are engineered for specific makes and models — mostly classic cars, trucks, and hot rods, though they also serve modern vehicles. Instead of the springs, shocks, and control arms your car came with, a Ridetech system uses their own geometry, materials, and damping technology.

The company has been building suspension since 1989 and focuses on ride quality and handling rather than just lowering a vehicle. Their kits typically include coil-over shocks (which combine the spring and shock absorber into one unit), new control arms, bushings, and sometimes anti-roll bars. The goal is to give you a smoother ride, better cornering control, and the ability to adjust your car's height without sacrificing how it drives.

Key Takeaways

  • Ridetech suspension replaces your factory system with engineered coil-over kits designed for specific vehicle models, not a universal bolt-on.
  • Their systems prioritize ride comfort and handling balance, which means they cost more than straightforward lowering springs but deliver better control and adjustability.
  • Installation requires removing your old suspension completely and bolting in new components, a job that takes a skilled shop several days and costs $1,500 to $4,000 in labor depending on your vehicle.
  • Ridetech kits let you adjust ride height and damping (how stiff the suspension feels) without replacing parts again, which matters if you plan to keep the car long-term.
  • These systems work best on vehicles where Ridetech has engineered a specific kit; retrofitting their suspension to a car they did not design for will not perform as intended.

How Ridetech suspension differs from factory suspension

Your car's original suspension was engineered to balance comfort, durability, and cost. The springs are usually steel coils or leaf springs, the shocks are separate components, and the whole system is tuned to handle average driving on average roads. Ridetech replaces this with a system where the spring and shock work as one unit — a coil-over — and the geometry of the control arms is often different from stock.

The practical difference is adjustability and consistency. A factory suspension loses its damping (shock absorption) over time as the fluid inside the shocks breaks down. A Ridetech coil-over can be adjusted for stiffness without replacement, and the engineering is tighter from the start. You can also change ride height by adjusting the coil-over collar, rather than replacing springs. For a car you plan to modify or keep for many years, this matters.

The trade-off is that Ridetech suspension is engineered for a specific vehicle. A kit for a 1967 Chevelle will not bolt onto a 1970 Chevelle without modification. If Ridetech has not engineered a kit for your exact year and model, you are either waiting for them to develop one or paying a shop to adapt a similar kit — which defeats the engineering and voids any warranty.

What you get in a typical Ridetech kit

A complete Ridetech suspension kit usually includes coil-over shocks for all four corners, new control arms (the rods that connect your wheel to the frame), new bushings (rubber or polyurethane pieces that let parts move smoothly), and sometimes an anti-roll bar. Some kits add a new sway bar or upgraded steering components. The exact contents depend on your vehicle and which Ridetech system you choose — they make several tiers from basic to fully adjustable.

The coil-overs are the heart of the system. Each one is a shock absorber with a spring wrapped around it, and the spring rate (how stiff it is) is matched to your vehicle's weight and intended use. You adjust ride height by turning a collar at the top of the coil-over, which changes how much the spring is compressed. You adjust damping — how much the shock resists movement — by turning a dial on the shock body itself, usually with a screwdriver or wrench.

Ridetech kits also come with new mounting brackets, hardware, and sometimes a new frame crossmember if your car's frame needs reinforcement. The instruction manual is specific to your vehicle and walks through the removal of old parts and installation of new ones. This is not a weekend job for a home mechanic unless you have suspension experience; most shops charge $1,500 to $4,000 in labor to install a complete kit, depending on how much of the old suspension is seized or rusted.

Installation and what it costs

Installing a Ridetech suspension kit requires removing your entire factory suspension — springs, shocks, control arms, sway bars, and sometimes the frame crossmember. This means the car is on a lift for several days, and any seized bolts or rusted components add time. A shop will also need to align your wheels after installation, because changing the suspension geometry changes the angles at which your wheels sit.

The parts themselves range from about $2,000 to $6,000 depending on which Ridetech system you choose and whether you are upgrading a classic car or a modern vehicle. Labor at an independent shop typically runs $1,500 to $4,000. Wheel alignment afterward costs $150 to $300. If your car has rust or seized bolts, add another $500 to $1,500. Total cost for a complete installation is usually $4,500 to $11,000.

Some shops specialize in Ridetech installations and can do the work faster and more reliably than a general mechanic. If you are buying a Ridetech kit, ask the company for a list of certified installers in your area — they have done the job before and know the specific steps for your vehicle. A shop that has never installed Ridetech suspension before will take longer and may miss details that affect how the system performs.

Why ride quality and handling improve with Ridetech

A Ridetech system improves ride quality because the coil-overs are engineered to absorb bumps more smoothly than worn factory shocks. As your car ages, the fluid inside the original shocks breaks down and the shock loses its ability to dampen movement. This makes the car bounce and feel loose. A new Ridetech coil-over restores that damping and is tuned specifically for your vehicle's weight and geometry.

Handling improves because Ridetech control arms are often designed with better angles than the factory arms. The angle at which the control arm sits affects how the wheel moves up and down, and how much the wheel tilts when you turn. Better geometry means less tire scrub (the tire dragging sideways as it moves), less body roll in corners, and more predictable steering response. You feel this as sharper cornering and less wandering on the highway.

The adjustability also matters for real-world driving. If you lower your car too much with cheap springs, the ride becomes harsh and the suspension can bottom out on bumps. A Ridetech coil-over lets you dial in the right stiffness for your roads and driving style. You can make it softer for comfort or stiffer for track days, all without buying new parts.

Ridetech kits are engineered for specific vehicles

Ridetech publishes a list of vehicles they have engineered kits for, organized by year and model. This list is on their website and includes classic Chevrolets, Fords, Mopars, and some modern trucks and sports cars. If your vehicle is on that list, you can order a kit designed specifically for it. If it is not, you have three options: wait for Ridetech to develop a kit for your model, buy a kit for a similar vehicle and pay a shop to adapt it, or choose a different suspension manufacturer.

Adapting a kit that was not engineered for your car is possible but risky. A shop can modify mounting points and control arm geometry to fit, but the suspension will not perform as Ridetech intended. The ride may be harsh, the handling may be unpredictable, and you lose any warranty. This approach costs nearly as much as the kit itself and delivers worse results than a purpose-built system.

Before you buy a Ridetech kit, confirm that your exact year and model is on their list. Call Ridetech directly or check their website. If your car is not listed, ask whether they plan to engineer a kit for it. Some vehicles are in development, and waiting a few months is better than paying for an adaptation that does not work well.

Maintenance and long-term durability

A Ridetech suspension requires less maintenance than a factory system because the coil-overs are sealed and the bushings are often polyurethane instead of rubber. Rubber bushings dry out and crack over time, especially in hot climates. Polyurethane lasts longer but is slightly noisier and can squeak if not greased. Most Ridetech kits come with polyurethane bushings, and the company recommends checking them every 12,000 miles and lubricating them if they squeak.

The coil-overs themselves are sealed and do not need service. However, if a coil-over leaks fluid or stops damping smoothly, it must be replaced. Ridetech sells individual replacement coil-overs, and a shop can swap one out in an hour or two. The cost is $400 to $800 per coil-over depending on the model. This is more expensive than a factory shock, but you are not replacing the whole suspension — just the one failed component.

Wheel alignment should be checked every 12,000 to 15,000 miles or whenever you notice the car pulling to one side. Because the suspension geometry is different from factory, alignment specs are different too. A shop must have the Ridetech alignment specifications for your vehicle, which Ridetech provides in the kit documentation. Not all alignment shops have these specs, so ask before you book.

Frequently Asked Questions

Can I install a Ridetech kit myself if I have basic mechanical skills?

Not safely. Suspension work requires a lift, specialized tools, and knowledge of torque specifications and alignment. A mistake can cause the wheel to fall off or the suspension to collapse while driving. Even experienced home mechanics usually hire a shop for suspension installation. The labor cost is worth the safety and warranty.

Will a Ridetech suspension make my car sit lower?

It can, but that is not the primary purpose. Ridetech kits are adjustable, so you can set the ride height to stock, lower, or higher depending on your preference. Lowering the car too much can reduce ground clearance and make the ride harsh. Ridetech recommends a moderate drop of 1 to 2 inches for most vehicles to balance looks and function.

What happens if my vehicle model is not on Ridetech's list?

You can contact Ridetech directly to ask if they plan to engineer a kit for your model. If not, you can choose a different suspension brand that supports your vehicle, or pay a shop to adapt a similar Ridetech kit. Adaptation is expensive and does not may provide good results, so it is usually better to choose a suspension engineered for your specific car.

How long does a Ridetech suspension last?

The coil-overs typically last 50,000 to 100,000 miles before the damping degrades, depending on driving conditions and how often you adjust them. The control arms and bushings can last the life of the car if maintained. Polyurethane bushings should be checked and greased every 12,000 miles to prevent squeaking and cracking.

Do I need to change my driving habits after installing Ridetech suspension?

No. A Ridetech system is designed to handle normal driving better than your factory suspension. You may notice the car feels tighter and more responsive, which is the point. If you lower the car significantly, watch for ground clearance on steep driveways or speed bumps, but the suspension itself does not require you to drive differently.