A Redshift suspension stem absorbs impact before it reaches your frame

A Redshift suspension stem is an aftermarket stem that contains a spring and damper system inside the steerer tube. Instead of bolting rigidly to your fork like a standard stem, it flexes vertically when you hit bumps, absorbing shock that would otherwise travel straight into your frame and hands. The suspension compresses on impact and returns to its original position, reducing vibration and jarring on rough pavement or gravel.

Redshift makes two main models: the ShockStop for road and gravel bikes, and the Suspension Stem for mountain bikes. Both work the same way mechanically — the difference is in the spring rate and damping tuning. The stem itself looks normal from the outside, but the internal mechanism is what sets it apart from every other stem you can bolt on.

This is not a replacement for a suspension fork. It works alongside your existing fork and handles the vertical movement your stem and handlebars experience. You keep your current fork; you just swap out the stem.

Key Takeaways

  • A Redshift suspension stem absorbs vertical impact through an internal spring and damper, reducing vibration that reaches your hands and upper body.
  • Installation requires removing your existing stem and headset cap, then installing the Redshift stem in the same location — no fork or frame changes needed.
  • The stem works best on gravel, rough pavement, and mixed-surface riding where constant small impacts add up to fatigue and hand numbness.
  • You will need to know your fork's steerer tube diameter (1 1/8 inch or 1.5 inch are most common) and your preferred handlebar clamp diameter before ordering.
  • The suspension can be tuned by adjusting preload and damping, though most riders find the factory settings work well without adjustment.

How the internal suspension actually works

Inside the Redshift stem is a spring (usually a coil spring or elastomer) and a damper filled with oil. When you hit a bump, the spring compresses, storing energy. The damper controls how fast the spring returns, preventing it from bouncing back too quickly and throwing off your steering. This two-part system is what makes it feel different from a rigid stem — the compression is smooth, not jarring.

The amount of movement is small, typically around 15 to 20 millimeters of vertical travel depending on the model. You will not notice the stem moving visibly, but you will feel the difference in how much shock reaches your hands. On a long gravel ride, this small amount of absorption adds up to noticeably less hand fatigue and numbness.

The stem also has a preload adjustment, usually a bolt on top of the stem cap. Tightening it increases the spring tension, making the suspension stiffer. Loosening it makes it softer and more responsive to small bumps. Most riders leave this at the factory setting, but if you find the stem too soft or too stiff for your weight and riding style, you can dial it in.

What bikes benefit most from a suspension stem

Gravel and adventure bikes see the biggest difference because they spend hours on rough, unpaved surfaces where a rigid stem would transmit constant micro-impacts. Road bikes on poor pavement also benefit, especially if you ride on chip seal or broken asphalt. The stem is less useful on smooth pavement or mountain bikes with full suspension, where the fork and rear shock already handle most of the work.

Riders who experience hand numbness, wrist pain, or shoulder fatigue on long rides often find relief with a suspension stem. The reduction in vibration transmission is real enough that many gravel racers and touring cyclists run one. If you are already using a gravel fork with some compliance, the stem adds another layer of isolation.

Fixed-gear and single-speed bikes are popular candidates too, because they have no suspension anywhere else on the bike. A suspension stem becomes one of the few ways to soften the ride without adding gears.

Installation and compatibility requirements

Installing a Redshift stem is the same process as installing any other stem: loosen the headset cap bolt, remove the old stem, slide the new one onto the steerer tube, align it, and tighten everything back down. You do not need to touch your fork, headset, or frame. If you can change a stem, you can install a Redshift.

You will need to know two measurements before you order. First, your steerer tube diameter — most bikes use either 1 1/8 inch (standard) or 1.5 inch (oversized). Your fork's spec sheet or a quick measurement will tell you which. Second, your handlebar clamp diameter — usually 31.8 millimeters, but some bars are 25.4 or 35 millimeters. The stem needs to match both.

Redshift stems come in different lengths and rise angles, just like regular stems. Choose the length and rise that matches your current setup or your desired fit. The suspension mechanism works the same regardless of length.

Tuning the suspension to your weight and riding style

Out of the box, Redshift stems ship with a preload setting that works for riders in the 150 to 200 pound range. If you are significantly lighter or heavier, or if you find the suspension too soft or too stiff, you can adjust the preload bolt on top of the stem cap. A quarter turn at a time is enough to feel a difference.

Tightening the preload makes the suspension stiffer and raises the ride height slightly. Loosening it makes the suspension more responsive to small bumps but also lowers the ride height. There is no "correct" setting — it depends on your weight, the terrain you ride, and how much compliance you want. Most riders never touch it and are happy with the factory setting.

Some Redshift models also have a damping adjustment, though this is less common. If yours has one, it controls how quickly the suspension returns after compression. Increasing damping makes the return slower and smoother; decreasing it makes it snappier. Again, factory settings are a good starting point.

Real-world performance on different surfaces

On smooth pavement, you will barely notice the stem is there. The suspension is tuned to set up on impacts, not on every tiny vibration. On rough pavement or chip seal, the difference becomes obvious — your hands feel less jarring, and you can grip the bars more lightly without losing control.

On gravel, especially washboard or rocky terrain, the stem shines. It does not eliminate every bump, but it softens the constant chatter that makes your hands numb after a few hours. Riders report being able to ride longer without hand fatigue and with better control because they are not fighting vibration.

On mountain bike trails with a suspension fork, the stem is less critical because the fork is already doing most of the work. However, some riders still run one for the extra isolation on the handlebars and upper body.

Cost and durability considerations

Redshift suspension stems cost between $200 and $350 depending on the model and length. This is more than a standard stem but less than upgrading your fork or adding a full suspension system. For riders who spend significant time on rough surfaces, the cost is often worth the reduction in fatigue and hand pain.

The internal spring and damper are sealed and do not require maintenance. The stem itself is aluminum and stainless steel, built to last as long as any other stem. Redshift backs their stems with a warranty, typically covering manufacturing defects. If the suspension feels less responsive after years of use, the damper fluid may have degraded, but this is rare.

Resale value is decent because the stem is a known product in the gravel and adventure bike community. If you sell the bike or upgrade later, you can usually recover a portion of the cost.

Frequently Asked Questions

Will a suspension stem make my bike harder to steer or control?

No. The suspension movement is small and happens vertically, not side to side. Steering response is unchanged. Some riders worry the stem will feel mushy, but the damping is tuned to keep the suspension responsive — it compresses and returns quickly enough that it does not affect handling.

Can I use a suspension stem on a bike with a suspension fork?

Yes. The fork handles large impacts and terrain compliance; the stem handles vibration and chatter that reaches your hands. They work together. Many gravel and adventure bikes run both.

What if my steerer tube is tapered (1.5 inch at the top, 1 1/8 inch at the bottom)?

Redshift makes stems for tapered steerers. You will need to specify tapered when you order. The stem clamps to the larger diameter section at the top of the fork.

Does the suspension stem add weight to my bike?

Yes, typically 100 to 150 grams more than a standard stem of the same length. For most riders, the fatigue reduction outweighs the small weight penalty, especially on gravel and adventure bikes where weight is less critical than comfort.

Can I adjust the suspension while riding?

The preload adjustment requires a wrench and is meant to be set before a ride. You cannot adjust it on the fly. Once you find a setting you like, you leave it there.