Ready Lift is a bolt-on suspension lift that raises your truck without replacing the factory springs

Ready Lift suspension is an aftermarket lift system made by Ready Lift Suspensions, a company based in Oklahoma. It works by inserting spacers or struts between your existing suspension components—usually between the frame and the axle, or between the coil springs and the frame—to increase ride height. The system does not replace your factory springs, shocks, or other suspension parts; it works alongside them.

The result is typically 2 to 3 inches of lift, depending on which Ready Lift kit you choose and which truck model you own. Because Ready Lift uses your existing suspension geometry rather than replacing it, installation is usually faster and cheaper than a full suspension overhaul. However, this approach also means the truck still relies on factory-designed springs and shocks that were never intended to carry the extra load a lift creates.

Key Takeaways

  • Ready Lift spacers bolt between your frame and axle or between springs and frame, raising the truck 2 to 3 inches without replacing factory suspension parts.
  • Installation typically takes 4 to 8 hours at a shop and costs between $800 and $2,000 for parts and labor, depending on your truck model.
  • A Ready Lift kit will change your truck's handling, increase wear on factory shocks and springs, and may affect your warranty if you have one remaining.
  • Tire clearance and driveline angles are the main reasons to measure twice before ordering, because some trucks need additional parts to work safely with a lift.
  • Ready Lift is one option among several lift types; coilover systems and full suspension replacements offer different trade-offs in cost, adjustability, and durability.

How Ready Lift spacers actually change your suspension geometry

When a spacer is inserted between your frame and axle, it pushes the axle down relative to the frame, which increases the distance between them. From the truck's perspective, this is the same as raising the body. The factory springs and shocks are still doing their job, but they are now working at a different angle and under different stress.

This matters because your truck's suspension was engineered as a system. The springs were tuned to support a specific weight at a specific ride height. The shocks were matched to those springs. The steering geometry, brake proportioning, and even the transmission's shift points were all calibrated around that original setup. A Ready Lift changes all of that without replacing any of those components.

The practical result is that your truck will sit higher, but the ride quality often becomes harsher, especially over bumps. The factory shocks wear faster because they are working outside their design range. The springs may sag over time as they fatigue under the new load distribution. Steering response can feel less precise because the suspension geometry has shifted.

Installation, cost, and what to expect at the shop

Ready Lift kits come with spacers, fasteners, and installation instructions. Most kits do not require welding or cutting. A shop will lift your truck, remove the wheels, disconnect the sway bar links and shock absorbers, and then insert the spacers between the frame and axle (or between the springs and frame, depending on the kit design). The shocks and links are reconnected, and the truck is lowered and aligned.

Labor time varies by truck model and shop experience. A shop familiar with Ready Lift kits may finish in 4 to 6 hours. A shop doing it for the first time might take 8 to 10 hours. Some shops charge by the hour; others quote a flat rate. You should expect to pay between $400 and $1,200 in labor, plus the cost of the kit itself, which typically ranges from $400 to $1,000 depending on your truck model and how much lift you want.

Before you book an appointment, ask the shop whether your truck will need a driveline angle correction kit or brake line extension. Some trucks, especially those with significant lift, need these extras to prevent driveline vibration or brake line strain. These additions can add $200 to $500 to the total cost.

Tire clearance, driveline angles, and what can go wrong

The most common mistake is ordering a Ready Lift kit without checking whether your tires will fit in the wheel wells after the lift is installed. A 2-inch lift might give you room for 33-inch tires, but a 3-inch lift on the same truck might not—it depends on your truck's model year, suspension design, and whether you plan to add a body lift later. Tires that rub against the fender or suspension components will wear unevenly and can damage your truck's frame or suspension.

The second issue is driveline angle. Your truck's driveshaft connects the transmission to the rear axle at a specific angle. When you lift the truck, that angle changes. If the change is too severe, the driveshaft will vibrate at certain speeds, which can damage the U-joints and eventually the transmission. Some Ready Lift kits are designed to minimize this problem, but not all trucks are equal. A shop should measure the driveline angle before and after installation to confirm it is within acceptable limits (usually less than 3 degrees of change).

A third concern is brake line strain. The brake lines run from the master cylinder to the wheels. A lift that raises the rear axle significantly can stretch these lines, causing them to crack or leak over time. Many shops will install extended brake lines as part of the job, but this is not always included in the kit price.

How a Ready Lift affects your truck's handling and warranty

A lifted truck handles differently. The center of gravity is higher, which means the truck is more prone to body roll in corners. The steering may feel less responsive because the suspension geometry has changed. Braking distance can increase slightly because the weight distribution has shifted. None of these changes are catastrophic on a truck designed for off-road use, but they are real and worth understanding before you commit.

If your truck is still under the manufacturer's warranty, a Ready Lift installation may void suspension-related coverage. Most manufacturers consider aftermarket suspension modifications a reason to deny warranty claims on the suspension, steering, or drivetrain. Check your warranty documents or call your dealer before installation. If your truck is out of warranty, this is less of a concern, but it is still worth knowing.

Resale value is another consideration. Some buyers view a lifted truck as a plus; others see it as a red flag that the truck has been modified and may have hidden problems. A well-installed Ready Lift with documentation is easier to sell than a poorly done lift, but it will not increase your truck's value.

Ready Lift compared to other suspension lift options

A coilover suspension system replaces your factory coil springs and shocks with adjustable coilovers that can be tuned for different ride heights and stiffness. Coilovers cost more (usually $2,000 to $5,000 installed) but offer better ride quality and handling because they are engineered as a complete system. They also allow you to adjust ride height and stiffness without replacing parts.

A full suspension replacement (sometimes called a "complete lift kit") replaces springs, shocks, control arms, and other components with parts designed to work together at the new ride height. This is the most expensive option (often $4,000 to $8,000 installed) but delivers the best handling and durability because everything is matched to the new geometry.

A body lift raises only the truck's body, not the axles. It is the cheapest option (usually $300 to $800) but does not increase ground clearance under the frame or axles, so it is mainly for tire clearance. Many owners combine a small body lift with a Ready Lift spacer lift to get more total height without the cost of a full suspension replacement.

Ready Lift sits in the middle: cheaper than coilovers or full replacements, but more effective than a body lift alone. It is a practical choice if you want modest lift on a budget and do not plan to do serious off-road driving or towing.

Maintenance and long-term durability of a lifted suspension

After a Ready Lift installation, your factory shocks will wear faster than they would on an unlifted truck. Most factory shocks last 50,000 to 80,000 miles; on a lifted truck, expect them to need replacement at 40,000 to 60,000 miles. When they do fail, you will notice a bouncier ride, especially after bumps, or fluid leaking from the shock body.

Your springs may also sag over time. This is normal wear, but it happens faster on a lifted truck because the springs are working outside their design range. If your truck's ride height drops noticeably after a few years, the springs may need replacement.

Check your suspension bolts and fasteners every 10,000 miles for the first 50,000 miles after installation. Vibration from driving can loosen bolts, and a loose suspension bolt is a serious safety issue. A shop can do this as part of a routine maintenance visit.

Frequently Asked Questions

Will a Ready Lift affect my truck's fuel economy?

Yes, slightly. A lifted truck has higher wind resistance and sits at a different angle, which typically reduces fuel economy by 1 to 3 miles per gallon. The effect is small but real, especially on highway driving. If you add larger tires (which many lifted truck owners do), the fuel economy loss will be greater.

Can I install a Ready Lift myself if I have basic mechanical skills?

It is possible but not recommended unless you have suspension experience. The job requires lifting the truck safely, disconnecting suspension components, and ensuring everything is torqued to the correct specification. A mistake can result in suspension failure while driving. A shop's labor cost is worth the safety assurance.

Do I need to re-align my truck after a Ready Lift installation?

Yes. A Ready Lift changes the suspension geometry, which changes wheel alignment angles. A shop should perform a four-wheel alignment after installation. This typically costs $100 to $200 and is essential for even tire wear and safe handling.

What is the difference between a Ready Lift and a leveling kit?

A leveling kit raises only the front of the truck to match the rear, usually by 1 to 2 inches. It is cheaper and simpler than a full lift. A Ready Lift raises the entire truck (front and rear) by the same amount, giving you more total height and a more dramatic appearance.

Will a Ready Lift void my truck's warranty?

It may void suspension and drivetrain warranty coverage. Manufacturers can deny warranty claims if they determine that an aftermarket modification caused the failure. Check your warranty documents or contact your dealer before installation to understand the specific terms for your truck.