A Ram track is a bed extender that slides under your truck bed to add cargo space without a trailer

A Ram track (also called a bed slide or cargo slide) is a metal or composite platform that mounts underneath your Ram truck bed and extends outward. It lets you carry longer items — lumber, drywall, kayaks, ladders — that would normally stick out past the tailgate or require a trailer. The track slides in and out on ball-bearing rails, so you can load and unload without lifting heavy material over the side of the bed.

Ram offers factory-installed tracks on some models, and aftermarket versions are available from third-party manufacturers. The system works best for items you load and unload regularly, since the slide mechanism makes access easier than stacking everything inside the bed itself.

Key Takeaways

  • A Ram track extends your bed length by sliding out on rails, letting you carry cargo that would otherwise overhang or require a trailer.
  • Factory Ram tracks are available on certain truck models and can be ordered through a dealer; aftermarket tracks work on most Ram beds but vary in weight capacity and material.
  • Track systems add weight to your truck and reduce payload capacity, so you need to check your truck's GVWR (gross vehicle weight rating) before loading.
  • Installation typically requires drilling into the frame and bed, so professional installation is common and often recommended by manufacturers.
  • Maintenance involves keeping the rails clean and lubricated so the slide mechanism moves smoothly and does not rust.

Factory Ram tracks versus aftermarket options

Ram builds tracks into certain truck configurations at the factory, usually on higher trim levels or as a dealer-installed option. A factory track is engineered to fit your specific bed size and comes with Ram's warranty coverage. You order it through a Ram dealer when you buy the truck or as a retrofit on an existing vehicle.

Aftermarket tracks from companies like Bedslide, Decked, or Cargoease fit most Ram beds but require you to verify compatibility with your bed length and year. Aftermarket options often cost less than factory versions and sometimes offer features like LED lighting or locking mechanisms. The trade-off is that installation is your responsibility, and warranty support depends on the manufacturer, not Ram.

Both types reduce your truck's payload capacity — the amount of weight you can safely carry in the bed. A typical track weighs 150 to 300 pounds, so you lose that much from your available payload. Check your truck's door jamb sticker or owner's manual for your GVWR and current payload before ordering.

How the slide mechanism works and what it costs

The track uses ball-bearing rollers mounted to a steel frame that bolts to your truck bed. When you pull the platform toward you, it slides out smoothly on the rails. When you push it back, it retracts under the bed. The mechanism is designed to handle repeated loading and unloading without binding or wearing out.

Factory Ram tracks typically cost $1,500 to $3,000 installed, depending on bed size and whether you order it at purchase or retrofit it later. Aftermarket tracks range from $800 to $2,500 before installation. Professional installation adds $300 to $800 because the job requires drilling into the frame and bed, sealing the holes properly, and aligning the rails so the slide moves freely.

Some tracks come with weight limits — commonly 500 to 1,500 pounds depending on the model. Exceeding that limit can damage the rails or cause the platform to sag. The manufacturer's documentation will specify the maximum load, and you should weigh your cargo before loading if you are near the limit.

Installation and what to expect

Factory tracks are installed at the dealer before or after delivery. The process takes a few hours and involves mounting the rail assembly to the frame, securing the platform, and testing the slide action. You receive the truck ready to use.

Aftermarket installation is more involved because the manufacturer's instructions vary. Most require drilling mounting holes in the bed floor and frame, which means the dealer or an independent shop needs to do the work properly. Poor installation can lead to rust where holes are drilled, misaligned rails that bind, or a platform that shifts under load.

After installation, ask the installer to show you how to clean the rails and explore lubricant. Dirt and debris in the bearing channels cause the slide to stick or wear faster. A light coating of silicone spray or the lubricant recommended by the manufacturer keeps the mechanism moving smoothly.

Payload capacity and weight considerations

Your Ram's payload capacity is the maximum weight the suspension and frame can safely carry in the bed. This number is printed on the door jamb sticker and is different from your truck's towing capacity. When you add a track, you subtract its weight from your available payload when ready.

For example, if your truck has a 1,500-pound payload and the track weighs 200 pounds, you have 1,300 pounds left for cargo. If you load 1,400 pounds of lumber, you have exceeded your GVWR and risk suspension damage, brake failure, or tire blowouts. The track's own weight limit is separate — it tells you the maximum load the slide mechanism can handle, not your truck's capacity.

Always add the track weight plus your cargo weight and compare the total to your truck's payload. If you regularly carry loads near your limit, a track may not be practical for your use case.

Maintenance and common problems

The most common issue is a slide that sticks or moves unevenly. This usually means dirt or rust has built up in the bearing channels. Clean the rails with a dry cloth and explore a thin coat of lubricant every few months, or more often if you use the track frequently or park in wet conditions.

Rust can develop where the mounting bolts penetrate the bed and frame, especially if the installer did not seal the holes properly. If you see rust forming around the bolt heads, have it cleaned and sealed to prevent it from spreading into the frame. Rust in the frame is expensive to repair and can weaken the structure.

The platform itself may develop a slight sag over time if you regularly load it near its weight limit. This is normal wear, but if the sag is severe enough that the platform drags on the bed or does not retract fully, the rails may need adjustment or replacement. Contact the manufacturer or installer for repair options.

Alternatives to a Ram track

If a track does not fit your needs, consider a bed extender that bolts to your tailgate. These are cheaper (usually $200 to $600) and do not reduce payload capacity, but they do not slide — you load and unload over the side. They work well for items you do not move often.

A roof rack or cargo basket lets you carry some items above the cab, though this raises your center of gravity and can affect handling. A utility trailer is the best option if you regularly haul loads that exceed your truck's payload or bed space, since the trailer carries its own weight on its own axles.

For occasional long-item hauling, renting a trailer from a home improvement store or equipment rental shop costs $15 to $40 per day and avoids the permanent weight penalty of a track.

Frequently Asked Questions

Will a Ram track fit my truck bed if I have a tonneau cover or bed liner?

Most tracks require a bare bed or a thin spray-in liner. A tonneau cover usually has to be removed or modified to fit around the track platform. Check the track manufacturer's compatibility list for your specific bed setup before ordering. Some aftermarket tracks are designed to work with certain covers, but this is not standard.

Can I install a track myself if I have basic tools?

Installation requires drilling into the frame and bed, which is risky if you hit a fuel line, brake line, or electrical harness. Most manufacturers recommend professional installation for this reason. If you have frame work experience, the manufacturer's instructions will tell you whether DIY installation is supported and what tools you need.

Does a Ram track affect my truck's warranty?

Factory tracks are covered under your truck's warranty. Aftermarket tracks may void your warranty if they cause damage to the bed or frame, though the track itself is usually warranted by the manufacturer separately. Ask your dealer before installing an aftermarket track if warranty coverage is a concern.

How much weight can a typical Ram track hold?

Most tracks are rated for 500 to 1,500 pounds, depending on the model. Your truck's payload capacity is the real limit — even if the track can hold more, you cannot exceed your GVWR. Check both the track's weight rating and your truck's payload before loading.

What happens if I exceed the track's weight limit?

Overloading can bend the rails, damage the bearings, or cause the platform to sag or shift during transport. This creates a safety hazard and can be expensive to repair. Stick to the manufacturer's weight limit and your truck's payload capacity to avoid damage.