Coil spring replacement typically costs between $300 and $800 per spring at an independent shop, or $400 to $1,000 at a dealership, plus labor that runs $150 to $300 per spring depending on your vehicle and location.

The total bill for replacing both front or both rear coil springs usually lands between $800 and $2,000 when you include parts and labor. A few vehicles need all four springs replaced at once, which can push the cost to $2,500 or more. The wide range exists because coil spring prices vary sharply by vehicle make and model, and labor time differs based on how accessible the springs are and whether your suspension uses other components that need to come off first.

You are paying for two things: the springs themselves and the technician's time to remove the old ones and install new ones. Neither price is fixed. A coil spring for a Honda Civic costs far less than one for a full-size truck, and a shop in a rural area typically charges less per hour than one in a major city. Knowing what drives these costs helps you understand why two quotes for the same job might differ by several hundred dollars.

Key Takeaways

  • Coil spring parts alone range from $100 to $400 per spring depending on your vehicle's make, model, and whether you choose OEM or aftermarket springs.
  • Labor costs $150 to $300 per spring and varies by shop type, location, and how difficult the springs are to access on your specific vehicle.
  • You may need to replace springs in pairs (both fronts or both rears) even if only one is broken, because matched springs wear together.
  • Independent repair shops are usually cheaper than dealerships, but verify they have experience with your vehicle's suspension type.
  • Getting quotes from at least two shops before you commit helps you spot outliers and understand what is included in each price.

What the parts themselves cost

A single coil spring part ranges from roughly $100 to $400, with most falling in the $150 to $250 range. The price depends almost entirely on what vehicle the spring fits. A spring for a compact sedan costs less than a spring for a pickup truck or SUV, because larger vehicles need stiffer springs that require more material and engineering. Luxury vehicles and sports cars often have springs that cost more because they are made to tighter tolerances or use special materials.

You have two choices: OEM (original equipment manufacturer) springs, which come from the vehicle's maker or an authorized distributor, or aftermarket springs from a third-party manufacturer. OEM springs typically cost 20 to 40 percent more than comparable aftermarket ones, but they are may provide to match your vehicle's original specifications exactly. Aftermarket springs are usually cheaper and work well if you buy from a reputable brand, but quality varies more. A shop can tell you which brands they trust and why.

Some people choose performance or lowering springs as a replacement, which can cost more or less than stock springs depending on the brand and type. That is a separate decision from a straight replacement, and the price difference is usually obvious in the quote.

Labor costs and what affects them

Replacing a coil spring takes a technician 1 to 2 hours per spring, depending on the vehicle. Shops charge between $100 and $200 per hour on average, though rates in major cities or at dealerships can reach $150 to $250 per hour. Multiply the hourly rate by the time estimate, and you get the labor portion of your bill. A job that takes 2 hours at $150 per hour costs $300 in labor alone.

The time estimate varies because some vehicles make springs straightforward to reach and others do not. A spring on the front of a sedan might take 45 minutes to an hour to replace. The same job on a truck with a more complex suspension or on a vehicle where the technician has to remove other components first (like a strut assembly or control arm) can take 2 to 3 hours. The shop should tell you their time estimate before you approve the work.

Dealerships almost always charge more per hour than independent shops, sometimes significantly. You pay for the dealership's overhead, their warranty on the work, and the fact that they have factory-specific tools and training. Independent shops often charge less but should have experience with your vehicle type. Ask whether they have done this job before on your make and model.

Why you might need to replace springs in pairs

If only one coil spring is broken, you might still need to replace both springs on that axle (both fronts or both rears). Springs wear together over time, and the unbroken spring on the same axle is likely near the end of its life too. Replacing only one leaves you with a mismatch: one new, stiff spring and one old, weaker spring on the same axle. This causes uneven handling, pulls to one side, and puts extra stress on the newer spring.

Most shops recommend replacing springs in pairs for this reason, and many will include that recommendation in their quote. If a shop quotes you for only one spring when you have a broken one, ask why. A good answer is that the other spring tested fine and the vehicle's suspension design allows safe single replacement. A vague answer is a reason to get a second opinion.

Some vehicles have independent suspension on all four corners, which means you can sometimes replace just one spring without affecting the others. Others use a solid axle in the rear, which means both rear springs should match. The shop should explain what your vehicle has and why they are recommending what they recommend.

Independent shops versus dealerships

An independent repair shop typically charges $600 to $1,200 total for replacing two coil springs, while a dealership for the same job usually costs $900 to $1,600. The difference comes down to hourly labor rates and parts markup. Dealerships mark up parts more and charge higher labor rates, but they also warranty their work and have direct access to OEM parts and factory service bulletins.

Independent shops can be just as good or better if they have experience with your vehicle and use quality parts. The risk is lower accountability if something goes wrong, though most independent shops stand behind their work and carry liability insurance. Before you choose an independent shop, check whether they are ASE-certified (a national technician certification), how long they have been in business, and whether they have reviews specific to suspension work.

Neither option is automatically the right choice. A dealership makes sense if your vehicle is under warranty (because independent work might void it) or if the suspension is complex and you want factory informed. An independent shop makes sense if you have found one with good reviews and you want to save money on a straightforward job.

Getting accurate quotes and what to ask

Call or visit at least two shops and ask for a written estimate that includes the part cost, labor cost, and total. A good estimate breaks down the price clearly and tells you whether it covers one spring or two, whether the parts are OEM or aftermarket, and how long the job takes. If a shop gives you a quote over the phone without seeing the vehicle, ask them to confirm it once they inspect the springs, because surprises happen.

Ask each shop whether the estimate includes wheel alignment after the replacement. Replacing coil springs can affect your vehicle's alignment, and some shops include a four-wheel alignment in the job while others charge it separately. Alignment usually costs $100 to $200, so this can make a real difference in your total bill. Also ask whether the estimate includes any other parts that might need replacement, like worn struts or damaged suspension bushings, because these sometimes show up once the old springs come off.

If one quote is significantly lower than the others, ask why. It might be because the shop uses cheaper aftermarket parts, charges less per hour, or has a faster process. It might also mean they missed something or plan to cut corners. A quote that is significantly higher might reflect better parts, more experience, or just a higher-cost location. The cheapest quote is not always the best deal.

Factors that push the price higher

Several things can add to the base cost of coil spring replacement. If the springs are rusted or stuck, the technician might need extra time or special tools to remove them, which increases labor. If the vehicle has air suspension instead of traditional coil springs, the job is more complex and costs more. If the suspension has been modified or damaged, other parts might need replacement at the same time.

Some vehicles require the removal of the entire strut assembly or control arm to access the springs, which adds time and sometimes requires additional parts. A few vehicles have springs that are integrated into a more complex suspension design, making the job harder. The shop will discover these complications during inspection, so always ask for a revised estimate if they find something unexpected.

Location matters too. A shop in a rural area with lower overhead typically charges less per hour than one in a major city. If you live in an expensive area, expect to pay more for labor even if the parts cost the same.

Frequently Asked Questions

How do I know if my coil springs are actually broken?

A broken coil spring usually causes a noticeable dip on one side of the vehicle, a clunking noise from the suspension, or a rough ride that gets worse over bumps. You might also see the vehicle sitting lower on one corner. A shop can inspect the springs visually and confirm whether they are broken or just worn. Do not ignore these signs, because a broken spring puts extra stress on other suspension parts and makes the vehicle unsafe to drive.

Can I replace just the front springs and leave the rear ones alone?

Yes, you can replace front springs without touching the rear, or vice versa. The front and rear suspensions are separate systems. However, if both front springs are worn, replacing only one will cause handling problems. The recommendation to replace springs in pairs applies to each axle independently, not across the whole vehicle.

Will replacing coil springs affect my warranty?

If your vehicle is under the manufacturer's warranty, check your warranty paperwork or call the dealership before having independent work done. Some warranties cover suspension parts, and independent replacement might affect that coverage. If the vehicle is out of warranty, independent replacement has no effect on any remaining coverage.

How long do coil springs last?

Coil springs typically last 80,000 to 100,000 miles or more, depending on driving conditions, vehicle weight, and road quality. Springs in areas with rough roads or heavy salt exposure wear faster. There is no set replacement interval; they fail when they fail. Regular suspension inspections can catch worn springs before they break.

Should I replace my springs at the dealership or an independent shop?

Choose based on warranty coverage, complexity of your suspension, and cost. Dealerships are safer if your vehicle is under warranty or has a complex suspension. Independent shops are usually cheaper and work well if they have experience with your vehicle type and good reviews. Get quotes from both before you decide.