What Old Man Emu suspension is and how it differs from factory parts

Old Man Emu (OME) is an Australian suspension manufacturer that makes replacement springs, shocks, and complete suspension kits for trucks, SUVs, and off-road vehicles. The company has been making suspension components since 1979, and their parts are designed to handle rougher terrain and heavier loads than most factory suspension systems.

Factory suspension on most vehicles is engineered as a compromise: it needs to work on highways, city streets, and light dirt roads without costing too much to produce. Old Man Emu suspension prioritises durability and performance in off-road conditions, which means stiffer springs, heavier-duty shock absorbers, and components that can handle repeated impacts from rocks, ruts, and uneven ground. The trade-off is that OME suspension typically rides firmer on smooth pavement than factory parts do.

OME makes both complete suspension systems and individual components. A complete kit usually includes coil springs or leaf springs, shock absorbers, and sometimes additional bracing or mounting hardware. You can also buy OME shocks alone to pair with factory springs, or springs alone to upgrade an existing setup. The choice depends on what your vehicle needs and what you plan to do with it.

Key Takeaways

  • Old Man Emu suspension is designed for off-road use and heavier loads, so it rides firmer than factory suspension on pavement.
  • OME shocks are velocity-sensitive, meaning they adjust their resistance based on how fast the suspension is moving, which helps control bouncing on rough terrain.
  • Installation requires removing the factory suspension and bolting on OME components, a job that typically takes a shop several hours and costs $500 to $1,500 in labour depending on the vehicle.
  • OME suspension can improve ground clearance and load capacity, but it does not change your vehicle's engine power or towing capacity beyond what the frame can handle.
  • Warranty coverage varies by component and retailer, so check the specific terms before purchase.

How OME shocks work differently from standard shocks

The shock absorber is the part that controls how the spring moves. When your wheel hits a bump, the spring compresses and then pushes back. Without a shock, the spring would bounce up and down for several seconds. The shock absorber slows that motion and converts the energy into heat, which stops the bouncing.

Old Man Emu shocks are velocity-sensitive, which means they automatically adjust how much resistance they provide based on how fast the suspension is moving. When you hit a small bump at highway speed, the suspension moves slowly, and the shock provides light resistance so the ride stays smooth. When you hit a large rock at low speed off-road, the suspension moves quickly, and the shock automatically stiffens to control that faster movement and prevent bottoming out.

This is different from a basic shock absorber, which provides the same resistance regardless of speed. It is also different from an adjustable shock, where you manually turn a dial to change the stiffness. With OME shocks, the adjustment happens automatically as you drive, which means you do not have to stop and reconfigure your suspension when you switch from highway to dirt road.

What changes when you install OME suspension

The most noticeable change is ride height. Most OME suspension kits raise the vehicle by 1 to 3 inches, depending on the kit and the vehicle. This extra clearance helps you clear rocks, logs, and deep ruts without the undercarriage scraping. It also improves approach angle and departure angle—the steepness of terrain your vehicle can climb or descend without the bumper or rear overhang hitting the ground.

The second change is load capacity. Factory suspension is rated for a specific payload—the weight of cargo and passengers the vehicle can safely carry. OME suspension, especially the heavier-duty kits, can increase this rating. If you regularly carry tools, camping gear, or a roof rack, stiffer springs prevent the vehicle from sagging and keep the suspension from bottoming out under weight.

The third change is how the vehicle handles bumps. On smooth pavement, OME suspension feels noticeably firmer than factory suspension. Some drivers prefer this because it feels more controlled; others find it harsh. On rough terrain, the firmness is an advantage because it prevents the suspension from compressing too far and losing ground clearance.

OME suspension does not change engine power, acceleration, or towing capacity. It does not improve fuel economy. It does not make the vehicle faster on pavement. What it does is allow the suspension to work harder without failing, which matters if you regularly drive on rough ground or carry heavy loads.

Installation, cost, and what to expect at a shop

Installing OME suspension requires removing the factory springs and shocks, which means lifting the vehicle and disconnecting the suspension from the frame. A shop will typically remove one corner at a time, unbolt the old components, bolt on the new ones, and then lower the vehicle and test-drive it. The entire job usually takes 4 to 8 hours depending on how corroded the old bolts are and whether the shop needs to replace any related parts.

Labour cost varies by region and shop, but typically ranges from $500 to $1,500. Parts cost depends on what you buy: a single OME shock might cost $150 to $300, while a complete suspension kit for a truck can cost $1,500 to $4,000 or more. Some shops bundle labour and parts into a single quote; others charge separately.

After installation, the shop should perform a wheel alignment. The change in ride height can alter the angle of your wheels, which affects how the vehicle tracks and how quickly the tyres wear. Alignment usually costs $100 to $200 and is worth doing when ready after suspension work.

Before you take your vehicle to a shop, confirm that the shop has experience with OME suspension on your specific vehicle. Not all shops are familiar with it, and some may not have the right tools or knowledge to install it correctly. Ask the shop whether they warranty their labour and what that warranty covers.

When OME suspension makes sense for your vehicle

OME suspension is most useful if you regularly drive on unpaved roads, take your vehicle off-road, or carry heavy loads. If you drive mostly on pavement and highways, factory suspension is usually adequate and will give you a smoother ride.

OME suspension also makes sense if your factory suspension is worn out and you want to upgrade rather than replace it with the same thing. Worn suspension allows the vehicle to bounce excessively, sit lower, and lose ground clearance. Upgrading to OME gives you new components that perform better than the originals.

If you own a truck or SUV that is commonly upgraded with OME suspension—such as a Toyota 4Runner, Tacoma, or Landcruiser, or a Ford F-150—you will find plenty of aftermarket parts and experienced shops. If you own a less common vehicle, OME may not make a kit for it, or the kit may be harder to find and more expensive.

Warranty, maintenance, and long-term durability

Old Man Emu suspension components typically come with a manufacturer warranty that covers defects in materials and workmanship. The length and terms vary by component and retailer, so check the specific warranty before you buy. Some retailers offer a lifetime warranty on springs; others offer three years. Shocks are usually warranted for three to five years.

The warranty usually does not cover damage from off-road use, impacts, or normal wear. If you hit a rock hard enough to bend a spring, that is not covered. If a shock wears out after five years of heavy use, that is normal wear and not covered. Read the fine print before you install the parts so you know what is and is not protected.

Maintenance is straightforward: inspect the shocks and springs visually every few months for leaks, cracks, or damage. If a shock is leaking oil, it needs to be replaced. If a spring is cracked, it needs to be replaced. Beyond that, OME suspension requires no special maintenance beyond what your vehicle already needs.

OME suspension is built to last longer than factory suspension in rough conditions, but it will eventually wear out. Shocks typically last 50,000 to 100,000 miles depending on how hard you use them. Springs last longer but can crack if you repeatedly hit large impacts.

OME suspension versus other aftermarket brands

Old Man Emu is one of several companies that make heavy-duty suspension for trucks and SUVs. Other well-known brands include Bilstein, Fox, Icon, and Rancho. Each brand has different strengths and price points.

Bilstein shocks are widely available and less expensive than OME, but they are not velocity-sensitive and are designed more for street use than extreme off-road use. Fox shocks are high-end race-oriented components that cost more than OME and are overkill for most owners. Icon and Rancho both make good off-road suspension, but availability and pricing vary by vehicle.

OME is a middle ground: more expensive than basic aftermarket options but less expensive than high-end race components, and specifically designed for off-road durability. The choice between brands depends on your budget, your vehicle, and what you plan to do with it. Talk to shops and other owners of your vehicle to see what they recommend.

Frequently Asked Questions

Will OME suspension make my vehicle sit higher?

Most OME suspension kits raise the vehicle by 1 to 3 inches. The exact amount depends on the kit and the vehicle. Check the product specifications for your specific vehicle before you buy to see how much lift you will get.

Can I install OME suspension myself?

If you have suspension experience and the right tools, you can install it yourself. Most owners take their vehicle to a shop because the job requires lifting the vehicle safely, removing corroded bolts, and performing a wheel alignment afterward. A shop is usually faster and safer.

Does OME suspension improve fuel economy?

No. Stiffer suspension and heavier components may slightly reduce fuel economy because the vehicle weighs more and the suspension does not absorb energy as efficiently. The difference is usually small and noticeable only over long distances.

What happens if I install OME shocks but keep my factory springs?

You can do this, and some owners do to save money. The OME shocks will work with factory springs, but you will not get the full benefit of the upgrade. The factory springs may not be stiff enough to work well with the heavier-duty shocks, and you will not get the improved load capacity or ground clearance that comes with OME springs.

How do I know if my OME suspension needs to be replaced?

Shocks need replacement if they are leaking oil, if the vehicle bounces excessively after hitting a bump, or if the ride becomes noticeably softer. Springs need replacement if they are cracked, if the vehicle sits lower on one side, or if you hear creaking noises from the suspension. Have a shop inspect the suspension if you are unsure.