McGaughys lift kits raise your truck's frame and suspension to increase ground clearance and accommodate larger tires
McGaughys makes bolt-on suspension systems that lift the front and rear of your truck by compressing or replacing springs, shocks, and related parts. The kits range from 2 inches to 12 inches of lift, depending on your truck model and the specific product line. McGaughys kits are designed to work with your truck's existing frame and steering geometry, so they typically require no frame modifications — though you will need new shocks, brake lines, and sometimes driveshaft work depending on how much you lift.
The main reason to install a lift kit is to fit larger tires and increase the distance between your truck's undercarriage and the ground. A higher stance also changes how your truck handles, sits visually, and performs off-road. McGaughys offers different suspension designs — coil springs, leaf springs, and air suspension systems — so the right kit depends on your truck's current setup and what you plan to do with it.
Key Takeaways
- McGaughys lift kits come in heights from 2 to 12 inches and are designed for specific truck models, so you must match the kit to your year, make, and engine size.
- Most McGaughys kits are bolt-on systems that do not require welding or frame cutting, but installation still involves replacing shocks, springs, and brake components.
- Lifting your truck changes steering geometry and suspension angles, which can affect tire wear, fuel economy, and how the truck handles on the highway.
- Professional installation is common because the work involves suspension geometry, brake line routing, and sometimes driveshaft balancing.
- McGaughys offers different product lines — Performance, Classic, and others — each tuned for different driving styles and truck uses.
How McGaughys lift kits are built and what they replace
A McGaughys lift kit is a complete suspension package, not just a spacer or a single component. Depending on the kit, it includes new coil springs or leaf springs, new shocks, new brake lines, new bump stops, and sometimes new control arms or track bars. The kit is engineered to work as a system, so mixing parts from different manufacturers or different McGaughys lines can throw off the suspension geometry and cause handling problems.
The two main types are coil spring kits and leaf spring kits. Coil spring kits replace the factory coil springs with taller ones and often include new upper and lower control arms to maintain the correct suspension angles. Leaf spring kits replace or add to the factory leaf springs and may include new shackles or hangers. McGaughys also makes air suspension kits for trucks with factory air suspension, which use adjustable air springs instead of traditional coils or leaves.
Installation requires removing the old suspension components, installing the new springs and shocks, routing new brake lines, and adjusting or replacing the driveshaft if the truck's ride height changes enough to alter the angle. Most shops charge between $1,500 and $3,000 in labor, depending on lift height and truck model, on top of the kit cost itself.
Choosing the right lift height for your truck and use
McGaughys offers kits in 2-inch, 4-inch, 6-inch, 8-inch, and 12-inch lifts, and the right choice depends on what tires you want to run and how you plan to use the truck. A 2-inch lift is mild and often fits under the truck's factory fenders without trimming; a 4-inch lift is common for street trucks and allows 33-inch tires in most cases. A 6-inch or higher lift is more aggressive and is typically chosen for off-road use or for fitting 35-inch or larger tires.
Higher lifts change the truck's center of gravity and steering geometry more dramatically. At 8 inches or higher, you may notice changes in how the truck steers, how quickly it responds to bumps, and how it feels on the highway. Taller lifts also increase the cost of installation and may require additional work like driveshaft modifications or steering stabilizer upgrades.
Your truck's model year and engine size matter because McGaughys designs different kits for different configurations. A 2-inch lift for a 2014 Chevy Silverado 1500 is not the same as a 2-inch lift for a 2020 model, and a truck with a diesel engine may need a different kit than one with a gas engine because of weight distribution. Always confirm your truck's exact year, cab style, bed length, and engine before ordering.
McGaughys product lines and how they differ
McGaughys makes several suspension lines, each designed for a different driving style. The Performance line is tuned for street driving and highway comfort; it uses progressive-rate springs and quality shocks to keep the ride smooth even with the added height. The Classic line is designed for trucks that spend time off-road and emphasizes articulation and ground clearance over ride comfort.
The Stage 1 and Stage 2 designations refer to how much the suspension is modified. A Stage 1 kit is a basic lift with new springs and shocks; a Stage 2 kit may include new control arms, track bars, or other geometry corrections to improve handling and tire wear. Higher stages cost more but offer better performance if you plan to drive aggressively or spend significant time off-road.
McGaughys also makes kits specifically for towing and hauling, which use stiffer springs and heavier-duty shocks to handle the extra weight without sagging. If you tow regularly, make sure the kit you choose is rated for your truck's towing capacity and payload.
What changes after installation and what to watch for
After a lift kit is installed, your truck will sit higher, but several other things change too. The steering geometry shifts, which can cause the front tires to wear faster on the inside edge if the suspension is not aligned correctly. The driveshaft angle changes, which can cause vibration if it is not rebalanced. The brake lines are longer, which can affect brake feel slightly. All of these are normal and expected, but they require attention during and after installation.
A professional alignment is essential after any lift kit installation. The alignment shop needs to set the caster, camber, and toe angles to McGaughys' specifications for your specific kit and truck model. Skipping this step will result in uneven tire wear and poor handling. Most shops include alignment in the installation cost, but confirm this before you book the work.
Your speedometer may read slightly high after a lift kit because the taller tires have a larger circumference than the factory tires. If you fit 35-inch tires on a truck that came with 32-inch tires, your speedometer will read about 9 percent fast. This is not dangerous, but it is worth knowing.
Installation: DIY versus professional shop
McGaughys kits are designed to be installed by a shop with suspension experience, though some do-it-yourselfers with the right tools and knowledge have completed installations. The work involves removing the truck from the ground, disconnecting the suspension, installing new springs and shocks, routing brake lines, and adjusting the driveshaft. If any step is done incorrectly, the truck can be unsafe to drive.
Most people choose professional installation because the work requires a lift, spring compressors, alignment equipment, and knowledge of suspension geometry. A shop that specializes in McGaughys kits will have the correct tools and will know the common pitfalls for your truck model. They can also handle unexpected issues — like rusted bolts or frame damage — that often come up during the work.
If you choose to install a kit yourself, McGaughys provides detailed instructions with each kit, and many shops will sell you the kit and let you bring it to them for installation. Some shops also offer partial installation — for example, they will install the springs and shocks but let you handle the brake lines — though this is less common.
Cost and warranty considerations
McGaughys lift kits range in price from around $400 for a basic 2-inch coil spring kit to $2,000 or more for a 12-inch air suspension system, depending on the truck model and product line. Installation labor typically adds $1,500 to $3,000. So a complete lift project — kit plus labor plus alignment plus new tires — often costs between $3,000 and $6,000 or more.
McGaughys kits come with a limited warranty that covers defects in materials and workmanship, typically for one year or the life of the original owner. The warranty does not cover wear and tear, damage from off-road use, or problems caused by incorrect installation. Read the warranty details that come with your kit to understand what is and is not covered.
Some shops offer a warranty on their installation work separate from McGaughys' warranty. This is worth asking about, because it protects you if something goes wrong during the install or shortly after.
Frequently Asked Questions
Will a McGaughys lift kit fit my truck?
McGaughys makes kits for most full-size trucks from the last 20 years, including Chevrolet Silverado, GMC Sierra, Ford F-150, Dodge Ram, and Toyota Tundra. You must match the kit to your truck's exact year, cab style, bed length, and engine. Check McGaughys' website or call a dealer with your truck's VIN to confirm the right kit before ordering.
Can I install a McGaughys kit myself?
Some experienced do-it-yourselfers have installed McGaughys kits, but the work requires specialized tools like spring compressors and a lift, plus knowledge of suspension geometry. Most people choose professional installation to avoid safety issues and to may support the alignment is correct afterward. If you attempt it yourself, follow McGaughys' instructions exactly and have the truck aligned by a professional shop when done.
Will a lift kit hurt my truck's fuel economy?
Yes, typically by 1 to 3 miles per gallon, depending on lift height and tire size. A taller truck has more wind resistance, and heavier suspension components add weight. The effect is usually small for mild lifts (2 to 4 inches) but becomes more noticeable at 6 inches and higher.
Do I need new tires after a lift kit?
Not always, but most people install a lift kit specifically to fit larger tires. If you keep your factory tires, the truck will sit higher but you will not gain the ground clearance benefit. New tires are an additional cost, typically $800 to $1,500 for a set of four, depending on size and quality.
How long does a McGaughys lift kit last?
The springs and shocks typically last 50,000 to 100,000 miles, depending on driving conditions and how well the truck is maintained. Off-road use and rough roads shorten the lifespan. Regular maintenance — checking for loose bolts, inspecting the shocks for leaks, and keeping the suspension clean — helps extend the life of the kit.