What King Suspension Kits Do for Your Tacoma

King Suspension makes aftermarket lift and suspension systems designed to raise your Tacoma's ride height and improve how it handles rough terrain. The kits replace your factory shocks, springs, or both, depending on which model you buy. They're built for trucks that see serious off-road use — rock crawling, desert running, mountain trails — where factory suspension runs out of travel and bottoms out.

King is known for using coilover shocks, which combine a shock absorber and a coil spring into one unit. This design lets you adjust ride height without stacking springs or adding blocks, and it keeps the suspension geometry closer to stock than some other lift methods. The shocks themselves use internal bypass chambers that let fluid move around the main piston, which helps them absorb big hits without getting harsh on smaller bumps.

For a Tacoma, King offers kits in different lift heights — typically 2.5 inches, 3 inches, or higher — and they come in different spring rates depending on whether you're running stock weight, added gear, or a heavy bumper and winch. The cost and complexity vary by generation (third-gen Tacoma, second-gen, and so on) and by how much of the suspension you're replacing.

Key Takeaways

  • King Suspension kits use coilover shocks that combine spring and damper in one unit, letting you adjust height and stiffness without stacking springs.
  • Different lift heights and spring rates are available, so you need to know your Tacoma's generation and how much weight you'll carry to pick the right one.
  • Installation requires removing the factory suspension and often involves new control arms, brackets, or sway bar links depending on lift height.
  • King shocks are tuned for off-road use and handle large bumps better than factory shocks, but they cost significantly more than a basic lift kit.
  • You should have a shop do the work unless you have suspension experience, because alignment and shock tuning affect how the truck drives.

How Coilover Shocks Differ From Factory Suspension

Your Tacoma's factory suspension uses a separate coil spring and shock absorber. The spring holds the truck's weight, and the shock absorber dampens the bouncing. King's coilover design puts both functions in one cylinder, which saves space and lets you adjust the spring's sitting height by turning a collar on the shock body.

The internal bypass design is the key difference in how King shocks feel. Instead of all the fluid flowing through one main piston, some fluid can bypass around it through secondary ports. When you hit a small bump, the bypass lets the shock move smoothly. When you hit a big rock or drop-off, the main piston closes off the bypass and the shock stiffens up to control the movement. This is why King shocks are called "bypass" or "remote reservoir" shocks — they handle a wider range of impacts without getting either too soft or too stiff.

Factory shocks are tuned for street driving and comfort on pavement. King shocks are tuned for sustained off-road use, which means they're stiffer overall and they work better when you're moving fast over rough ground. On smooth pavement, some drivers find them harsher than stock.

What Comes in a King Suspension Kit for Tacoma

A basic King kit includes four coilover shocks (one for each corner), new springs matched to your lift height, and mounting hardware. Depending on the kit, you may also get new upper control arms, lower control arms, sway bar links, or a new track bar — these are needed because lifting the truck changes the angles of the suspension geometry, and the factory arms may not fit or may bind.

Some kits come with remote reservoirs, which are separate cylinders connected to the shocks by hoses. These hold extra fluid and help the shocks stay cool during hard use. Remote reservoir shocks cost more but perform better on long, rough runs because they don't overheat.

You'll need to check the specific kit for your Tacoma generation to see what's included. A third-gen Tacoma (2016 and newer) kit is different from a second-gen (2005–2015) kit, and the parts don't interchange. King's website or a suspension shop can tell you exactly what comes in the box for your truck.

Installation and What to Expect at a Shop

Installing a King Suspension kit is not a backyard job for most people. The work involves removing the wheels, unbolting the factory suspension, and installing new shocks, springs, and control arms. Depending on lift height and what else needs replacing, the job takes 8 to 16 hours of labor.

After installation, your truck needs a wheel alignment. Lifting the suspension changes the angles of the wheels relative to the frame, and if you don't align it, the truck will pull to one side and the tires will wear unevenly. A shop that knows suspension work will align it to factory specs or adjust it for your driving style if you ask.

Some shops will also tune the shocks after installation, which means adjusting the bypass settings and spring preload to match your weight and driving. This is optional but worth doing if you plan to do serious off-road work, because a shock tuned to your truck will handle better than one set to a generic middle ground.

Cost and Comparison to Other Lift Methods

A King Suspension kit for a Tacoma typically costs between $2,000 and $4,500 for the parts alone, depending on lift height and whether you get remote reservoirs. Labor at a shop usually runs $1,500 to $2,500. A basic coil spring lift or block lift costs less upfront but doesn't perform as well off-road and may require additional work to keep the suspension geometry correct.

If you're comparing King to other brands, Fox and Bilstein also make quality coilover kits for Tacomas. Fox is often more expensive and tuned for high-speed desert racing. Bilstein is less expensive and works well for moderate off-road use. King sits in the middle — good performance, good durability, and a solid reputation with Tacoma owners.

The choice depends on how hard you'll use the truck. If you're doing light trails and want a smoother street ride, a basic lift may be enough. If you're rock crawling or running fast over rough terrain regularly, King or Fox is worth the investment because the shocks will last longer and handle the abuse better.

Maintenance and Long-Term Durability

King shocks are sealed units, so you can't service them yourself — if one fails, you replace it. Most King shocks last 50,000 to 100,000 miles of hard off-road use before the seals wear out and they start leaking. On lighter use, they can last longer. The cost to replace one shock is usually $400 to $800, depending on whether it has a remote reservoir.

You should inspect the shocks visually every few months if you're doing regular off-road work. Look for oil leaking from the shaft or the body, which means the seals are failing. Also check that the shock body isn't dented or bent, because damage to the cylinder will cause the piston to bind and the shock to feel harsh or unresponsive.

The springs and control arms are passive parts and don't wear out the way shocks do, but they can bend or break if you hit something hard enough. If you damage a control arm or spring, it's usually cheaper to replace the whole kit than to try to repair individual parts.

Frequently Asked Questions

Will a King Suspension kit fit my Tacoma?

King makes kits for most Tacoma generations, but you need to know your year and generation to order the right one. Third-gen (2016+), second-gen (2005–2015), and first-gen (1995–2004) kits are all different. Check King's website or call a suspension shop with your truck's year and mileage to confirm what's available.

Can I install a King kit myself?

You can if you have suspension experience, a lift, and the right tools, but most people should have a shop do it. Suspension work affects how the truck handles and stops, and mistakes can be dangerous. A shop will also align the truck afterward, which is necessary and requires special equipment.

Do I need new tires after a King lift?

Not necessarily, but lifting the truck changes the wheel well clearance and may let you fit larger tires. Many people use a King kit as a reason to upgrade to bigger, more aggressive tires for off-road use. Your current tires will fit, but you may want to change them anyway.

How much will my Tacoma's ride height increase?

King kits come in different lift heights — typically 2.5, 3, or 3.5 inches — and the actual height gain depends on your truck's weight and how much gear you're carrying. A 3-inch kit will lift the frame about 3 inches, but the body may sit slightly lower if you're carrying heavy equipment. A suspension shop can show you the exact height before and after installation.

What's the difference between King and Fox suspension?

Both are high-quality coilover kits, but Fox is tuned for high-speed desert racing and costs more. King is tuned for general off-road use and is usually less expensive. For most Tacoma owners doing trails and moderate off-road work, King is the better value. Fox is worth the extra cost only if you're running fast over open desert regularly.