A king suspension is a heavy-duty suspension system designed for trucks and SUVs that carry extreme loads or operate in severe off-road conditions
King Suspension manufactures aftermarket coil-over suspension components — primarily shock absorbers and complete suspension kits — for pickup trucks, SUVs, and off-road vehicles. The brand is known for high-travel designs that allow wheels to move up and down over rough terrain without the vehicle body bottoming out. King shocks are built to handle the stress of rock crawling, desert racing, and towing heavy trailers, where factory suspension often fails.
The core difference between King and factory suspension is travel distance and damping control. A factory shock on a truck might allow 8 to 10 inches of wheel movement. A King coil-over can provide 12 to 16 inches or more, depending on the model and vehicle. That extra movement means your wheels stay in contact with the ground longer on uneven terrain, which improves traction and reduces the impact felt inside the cabin.
King suspension is not a repair or replacement for a worn-out factory system — it is an upgrade you choose to install. The cost ranges from $2,000 to $8,000 per axle for a complete kit, depending on the vehicle and whether you add extras like remote reservoirs or adjustable damping. Installation requires removing the factory suspension and bolting on the new components, which typically takes a shop 8 to 16 hours.
Key Takeaways
- King Suspension makes aftermarket coil-over shocks and suspension kits for trucks and SUVs, not factory parts or repairs.
- The main benefit is increased wheel travel — how far your wheels can move up and down — which improves traction on rocks, sand, and rough terrain.
- A complete King suspension kit costs $2,000 to $8,000 per axle and requires professional installation at a shop.
- King suspension is most useful if you regularly drive off-road, tow heavy loads, or want to lift your truck higher than factory height allows.
How King Suspension Differs from Factory Shocks
Factory suspension is engineered to balance comfort, durability, and cost for typical road driving. The shocks are sealed units with fixed damping — they cannot be adjusted, and they wear out over time. Once worn, you replace them with new factory shocks or an aftermarket equivalent.
King suspension uses a different design: a coil spring wrapped around the shock body, with a separate reservoir (usually remote, mounted away from the wheel) that holds extra fluid. This setup allows the shock to compress and extend much farther than a factory shock. The damping — the resistance to movement — can often be tuned by turning an adjustment knob on the shock itself or the remote reservoir, letting you dial in how stiff or soft the suspension feels.
The trade-off is complexity and cost. A King suspension system requires more installation labor, takes up more space in the wheel well, and needs occasional maintenance. But if you spend time off-road or tow regularly, the improved performance and durability often justify the expense.
When You Actually Need King Suspension
King suspension makes sense if you fall into one of these categories: you rock crawl or do serious off-road driving; you tow a heavy trailer regularly and want to reduce sag and improve stability; you want to lift your truck significantly higher than factory height; or you race in off-road events like Baja or King of the Hammers.
If you drive mostly on pavement, use your truck for light hauling, or just want a smoother ride, King suspension is overkill. A set of quality aftermarket shocks from brands like Bilstein or Fox will cost less, install faster, and give you the improvement you need. King suspension is built for extreme use, and you pay for that capability whether you use it or not.
The durability argument is real if you drive hard. King shocks are engineered to survive repeated impacts that would destroy factory shocks. But if your truck sits in a driveway most of the time, that durability is wasted money.
Installation, Cost, and Maintenance
King suspension kits come in different configurations. A basic coil-over kit includes four shocks (one per wheel) and new coil springs. A full system might add upper and lower control arms, sway bar links, and bump stops. Prices vary by vehicle: a Jeep Wrangler kit runs $3,000 to $5,000, while a full-size truck kit can reach $8,000 or more.
Installation at a professional shop typically costs $1,500 to $3,000 in labor, depending on how much of the suspension needs to be replaced and whether your truck has been modified before. Some shops charge by the hour (usually $100 to $150 per hour); others quote a flat rate for the job. Get quotes from at least two shops before committing.
After installation, King suspension requires occasional maintenance: checking fluid levels in remote reservoirs, inspecting seals for leaks, and cleaning the shocks after dusty or muddy driving. Most owners do not need to rebuild or service their King shocks for 50,000 to 100,000 miles if they maintain them properly. Rebuilds, when needed, cost $400 to $800 per shock.
King Suspension vs. Other Aftermarket Brands
King is not the only company making high-travel suspension. Fox Racing Shocks, Bilstein, and Icon Vehicle Dynamics all make comparable products. The choice often comes down to vehicle compatibility, budget, and personal preference.
Fox shocks are popular for rock crawling and are often slightly cheaper than King for some vehicles. Bilstein offers a middle ground — better than factory but less extreme than King, with lower cost. Icon specializes in complete suspension systems and is known for quality control. King has a strong reputation for durability and adjustability, especially in the desert racing community.
Before buying, check which brands offer kits for your specific truck or SUV. Not every brand makes parts for every vehicle. Also compare what is included in each kit: some include all new arms and links, others just the shocks and springs. A cheaper kit that requires you to buy additional parts separately might end up costing more overall.
Lift Height and Tire Clearance with King Suspension
One reason people choose King suspension is to lift their truck higher. A King coil-over kit can raise your truck 2 to 6 inches, depending on the spring rates and vehicle. This extra height gives you more ground clearance for rocks and obstacles, and it looks more aggressive.
Higher lift means bigger tires fit under the truck. If you want to run 35-inch or 37-inch tires, you almost always need a suspension lift. King suspension, combined with a body lift or spacer, can get you there. But taller tires and higher ride height affect handling, fuel economy, and how the truck drives on pavement. Make sure you want those trade-offs before committing.
Also check your truck's geometry after lifting. Extreme lift angles can wear out CV joints, transfer case components, and driveshafts faster. A professional shop can advise you on how high you can safely go without causing premature wear.
Warranty and Support
King Suspension typically offers a limited warranty on its shocks — usually one to three years, depending on the product line. The warranty covers defects in materials and workmanship, not damage from misuse, impacts, or off-road abuse. Read the warranty terms before you buy, because coverage varies.
King has a reputation for responsive customer support and technical help. If you have questions about setup, adjustment, or troubleshooting, you can contact them directly. Many shops that install King suspension also have relationships with King's tech team and can get answers quickly if something goes wrong.
Keep your receipts and installation documentation. If you need warranty service, you will need proof of purchase and installation date. Some warranty claims require the shock to be shipped back to King for inspection, which can take several weeks.
Frequently Asked Questions
Do I need King suspension if I just want a smoother ride?
No. King suspension is built for extreme off-road use and high-travel performance, not comfort. If you want a smoother ride on pavement, a set of quality aftermarket shocks like Bilstein or KYB will cost less and work better for your needs. King suspension actually rides firmer on smooth roads because it is tuned for impacts and rough terrain.
Can I install King suspension myself?
It is possible if you have suspension experience and the right tools, but it is not recommended for most people. The work requires removing and reinstalling critical safety components, and mistakes can affect handling and braking. Professional installation ensures the job is done correctly and usually comes with a warranty on the labor.
How long does King suspension last?
With proper maintenance, King shocks typically last 50,000 to 100,000 miles. Heavy off-road use or racing can shorten that lifespan. Factory shocks usually last 50,000 to 80,000 miles, so King is not dramatically longer-lasting — the difference is that King shocks can be rebuilt and adjusted, while factory shocks cannot.
Will King suspension void my truck's warranty?
Installing aftermarket suspension may void your manufacturer's warranty on suspension and steering components. Some dealers will still service other parts of the truck under warranty, but suspension-related issues will likely be your responsibility. Check your warranty terms and ask your dealer before installation if you are concerned.
What is the difference between King and Fox suspension?
Both are high-quality, high-travel systems. Fox is often slightly cheaper and very popular for rock crawling. King is known for adjustability and durability in desert racing. For most vehicles, either brand will perform well — the choice comes down to what is available for your truck, price, and personal preference. Talk to shops that work with both brands to see which they recommend for your specific use.