A jug handle turn is a right turn made from the left lane by looping around an intersection on a separate road
A jug handle turn is a road design that lets you turn right without crossing oncoming traffic. Instead of turning right from the right lane, you stay in the left lane, pass through the intersection, then use a separate curved road (the "handle") to loop back and cross the intersection perpendicularly. The result looks like a jug when drawn from above — a straight section with a curved loop attached to one side.
The design exists to manage traffic flow at busy intersections, especially where a direct right turn would create congestion or safety problems. New Jersey uses jug handles extensively on state highways and local roads. A few other states have adopted them in limited areas, but they remain uncommon outside the Northeast. If you drive in New Jersey regularly, you will encounter them; in most other states, you may never see one.
Key Takeaways
- A jug handle is a separate curved road that lets you turn right by looping around an intersection instead of turning directly from the right lane.
- New Jersey uses jug handles on many state routes and local roads to reduce congestion and improve traffic flow at busy intersections.
- The turn requires you to pass through the intersection in the left lane, then use the handle road to complete the right turn.
- Drivers unfamiliar with jug handles often miss the turn or attempt a direct right turn, which is illegal at jug handle intersections.
- A few other states have adopted jug handles in specific locations, but they remain rare outside New Jersey.
How a jug handle intersection works in practice
At a jug handle intersection, the right turn is not where you expect it. You enter the intersection in the left lane and proceed straight through. After you cross the intersection, a curved road branches off to the right — this is the handle. You follow this curve, which loops back around, and it intersects the road you just crossed at a right angle. You then turn left onto that road, completing what would have been a right turn at the original intersection.
The design moves the conflict point — where turning traffic crosses oncoming traffic — away from the main intersection. This reduces the number of vehicles competing for space at the busiest moment. Traffic engineers use jug handles when a direct right turn would create a bottleneck or when the intersection geometry makes a standard right turn impractical.
Signage marks the jug handle approach. You will see signs indicating "Right Turn" or "Jug Handle" before the intersection, and arrows on the pavement guide you into the left lane. Once you are in the handle, additional signs confirm the direction. The entire maneuver adds time to your trip — you travel farther and make two turns instead of one — but it keeps traffic moving overall.
Why New Jersey relies on jug handles
New Jersey adopted jug handles starting in the 1960s as a solution to congestion on state routes that run through dense suburban and urban areas. The state has many intersections where a standard right turn would require vehicles to cross multiple lanes of oncoming traffic or would force right-turning traffic to merge with left-turning traffic, creating dangerous conflicts.
Jug handles also allow the state to maintain higher speed limits on main roads. Because right-turning traffic is separated from the main intersection, through traffic does not have to slow down or yield to turning vehicles. This keeps the main road moving faster, which appeals to traffic engineers managing high-volume corridors.
The design became embedded in New Jersey's road network because it solved real problems at specific intersections. Over time, it became a standard tool in the state's traffic management toolkit. Other states have experimented with jug handles but have not adopted them as widely, partly because they require more land and are unfamiliar to most drivers.
Common mistakes drivers make at jug handle intersections
The most common error is attempting a direct right turn instead of using the jug handle. Drivers unfamiliar with the intersection see a road to the right and assume that is where they should turn. This is illegal at jug handle intersections and creates a safety hazard by placing a turning vehicle in the path of through traffic or other turning vehicles.
A second mistake is missing the jug handle entirely and continuing straight past it. This happens when drivers do not see the signage or do not understand the design. You end up on the wrong road and have to find another way to reach your destination.
Drivers also sometimes hesitate or brake suddenly when they realize they need to use the jug handle, which can startle drivers behind them. If you are unfamiliar with an intersection, read the signs well in advance and stay in the left lane as directed. If you miss the turn, continue to the next intersection and turn around rather than stopping or reversing course.
Jug handles in other states
Outside New Jersey, jug handles are rare. A small number appear in New York, Pennsylvania, and Delaware, usually on state routes that border New Jersey or in areas with similar traffic patterns. Michigan has experimented with a variation called a "Michigan left," which is similar in concept but uses a median crossover instead of a separate curved road.
Most states have not adopted jug handles because they are unfamiliar to the driving public and require more right-of-way than standard intersections. Traffic engineers in other regions tend to use different solutions — roundabouts, traffic signals with protected left-turn phases, or grade-separated interchanges — to manage the same problems.
If you drive primarily outside New Jersey, you are unlikely to encounter a jug handle. If you move to or frequently visit New Jersey, expect to see them on state routes and some local roads, especially in the northern and central parts of the state.
How to navigate a jug handle safely
Read signage early. Jug handle signs appear well before the intersection, usually 500 feet or more away. Look for signs that say "Right Turn" or "Jug Handle" and arrows on the pavement directing you into the left lane. If you see these signs, move into the left lane and prepare to pass through the intersection.
Stay in the left lane through the intersection. Do not attempt to turn right before the jug handle. Proceed straight through the intersection as if you were going to continue on the same road. After you cross, watch for the curved handle road branching to the right.
Follow the handle road and turn left onto your destination road. The handle is usually well-marked with arrows and signs. Once you complete the left turn, you are heading in the direction you intended, having made a right turn through the jug handle design.
If you are unfamiliar with the intersection, slow down slightly as you approach. This gives you more time to read signs and react to the design. Do not stop in the intersection or on the handle road unless traffic requires it. Keep moving through the maneuver at a steady pace.
Frequently Asked Questions
Is it illegal to turn right directly at a jug handle intersection?
Yes. At a jug handle intersection, a direct right turn is illegal and dangerous. You must use the jug handle as designed. Turning directly can result in a traffic citation and puts you in conflict with other vehicles.
Do I have to use the jug handle if I am turning right?
If the intersection has a jug handle, you must use it to turn right. You cannot skip it and turn directly. If you miss the jug handle, continue to the next intersection and turn around.
What if I am not sure whether an intersection has a jug handle?
Look for signage as you approach. Jug handle signs are posted in advance. If you do not see signs directing you into the left lane, the intersection likely does not have a jug handle. When in doubt, stay in the right lane and turn right as you normally would.
Are jug handles slower than regular right turns?
Yes, a jug handle adds distance and time to your individual trip. However, the design keeps overall traffic moving faster on the main road by separating turning traffic from through traffic. The trade-off is worth it on high-volume corridors.
Why does New Jersey use jug handles but other states do not?
New Jersey adopted jug handles to solve congestion on busy state routes in the 1960s and has continued using them because they work for the state's traffic patterns. Other states use different solutions like roundabouts or signal timing. Jug handles require more land and are unfamiliar to most drivers, so they have not spread widely.