Strut replacement costs between $300 and $800 per strut at an independent shop, or $400 to $1,000 at a dealership
The total bill depends on your vehicle's make and model, which shop you choose, and whether you need both struts replaced at once. Most shops charge $150 to $400 in labor per strut, plus the part itself at $150 to $600. A complete replacement of both front struts typically runs $600 to $1,600 total. Rear struts, when they need replacement, cost roughly the same as front ones, though some vehicles have different suspension designs in back.
The wide range exists because strut assemblies vary dramatically. A Honda Civic strut is simpler and cheaper than a BMW or Audi strut with electronic damping. Dealerships charge more than independent shops, but they stock OEM (original equipment manufacturer) parts and have technicians trained on your specific vehicle. Independent shops often use aftermarket struts, which cost less but may not feel identical to the original.
Key Takeaways
- Labor costs $150 to $400 per strut; the part itself runs $150 to $600, so budget $300 to $800 per strut installed.
- Dealerships charge 20 to 40 percent more than independent shops, but use OEM parts and factory-trained technicians.
- Both front struts should usually be replaced together to maintain even suspension performance, even if only one is failing.
- Aftermarket struts cost less upfront but may wear faster or feel different than OEM parts, depending on the brand.
- Get a written estimate before work begins; some shops bundle alignment into the strut job, while others charge it separately.
Why strut costs vary so much between vehicles
A strut is not a single part—it is an assembly that includes the shock absorber, spring, and mounting hardware all in one unit. Some vehicles use straightforward, bolt-on struts that take 45 minutes to an hour per side. Others, particularly luxury cars and some all-wheel-drive models, have struts integrated with electronic suspension systems, adaptive damping, or complex steering geometry. Those jobs can take two to three hours per side and require computer diagnostics.
The part cost itself reflects this complexity. A strut for a 2015 Toyota Camry might cost $180 to $250 at an independent shop. The same labor on a 2018 BMW 3 Series could mean a strut costing $400 to $550, plus additional work to recalibrate suspension sensors. Dealerships have access to OEM pricing that independent shops do not, but they pass the markup to you.
Dealership versus independent shop pricing
A dealership will charge you roughly 25 to 40 percent more than an independent shop for the same strut replacement. On a $600 job at an independent shop, expect to pay $750 to $840 at the dealership. The premium covers OEM parts, factory-trained technicians, and the ability to run manufacturer-specific diagnostics on your vehicle's computer.
Independent shops often source aftermarket struts from brands like KYB, Bilstein, or Monroe. These parts are legal replacements and carry their own warranties, usually two to three years. They perform the job correctly, but the strut may not feel identical to the original—some aftermarket struts are softer or firmer, and they may not last as long. If your vehicle is still under warranty, using aftermarket parts at an independent shop could void suspension coverage, so check your warranty terms first.
Should you replace one strut or both
Mechanics typically recommend replacing both front struts at the same time, even if only one is visibly worn or leaking. Struts wear gradually, and if one is failing, the other is usually not far behind. Replacing only one creates an imbalance: the new strut will be stiffer and more responsive than the worn one, causing uneven handling and accelerating wear on other suspension parts like control arm bushings and ball joints.
The cost difference between one and two struts is not just the price of the second part. You pay labor twice, but the second replacement often takes slightly less time because the technician is already set up and familiar with your vehicle. Expect to pay roughly 60 to 70 percent more for two struts than for one, not double. If your budget is tight, replacing both fronts now is cheaper than replacing one now and the other in six months.
OEM parts versus aftermarket: what the difference costs
An OEM strut from the dealership carries the manufacturer's engineering and is may provide to match your vehicle's suspension tuning. It will cost $100 to $200 more per strut than an equivalent aftermarket part. Aftermarket struts from established brands are engineered to meet or exceed OEM specifications, but they are not identical. A Bilstein strut may feel slightly firmer than the OEM Honda strut it replaces, which some drivers prefer and others notice when ready.
Warranty coverage differs too. OEM struts usually carry a three-year, unlimited-mileage warranty through the dealership. Aftermarket struts typically come with a two-year or 24,000-mile warranty from the manufacturer, though some shops add their own labor warranty. If a strut fails at 40,000 miles, the aftermarket warranty may not cover it, but the OEM warranty would. For vehicles you plan to keep long-term, OEM parts often make financial sense despite the higher upfront cost.
What to expect when you get an estimate
Call three shops—at least one dealership and two independent shops—and ask for a written estimate that includes the strut part cost, labor cost per strut, and any additional work. Some shops bundle a wheel alignment into the strut job because the suspension geometry changes when you replace struts; others charge alignment separately at $100 to $200. Ask whether alignment is included or quoted separately.
The estimate should specify whether the shop is using OEM or aftermarket parts and which brand. If it does not, ask. A reputable shop will also note whether they are replacing just the strut or the entire strut assembly (some jobs require replacing the coil spring separately, which adds $50 to $150). Once you have three estimates, compare the total installed cost, not just the part price, and ask about warranty coverage on both parts and labor.
Signs your struts need replacement soon
Struts typically last 50,000 to 100,000 miles, depending on driving conditions and road quality. You may notice a bouncy or floating feeling after hitting a bump, as if the car does not settle back down quickly. The front end might dip excessively when you brake, or the rear end might squat under acceleration. Some drivers hear a clunking sound from the suspension, especially over rough roads or speed bumps.
Uneven tire wear, particularly on the inner or outer edge of the front tires, can signal worn struts. If you see oil leaking from the strut itself (the cylindrical part near the wheel), replacement is overdue. None of these signs mean you must replace struts when ready, but they mean you should get an inspection within the next month or two. Worn struts reduce your vehicle's stability and braking performance, particularly in emergency maneuvers.
Frequently Asked Questions
Can I replace just the shock absorber inside the strut instead of the whole assembly?
Some independent shops can rebuild or replace the internal shock cartridge while keeping the outer strut housing, which costs $100 to $200 less than a full strut replacement. This works only if the housing itself is not damaged or corroded. Most shops recommend full replacement because the spring and mounting hardware wear together with the shock, and separating them risks poor performance or safety issues.
How long does a strut replacement take?
One strut typically takes 45 minutes to two hours, depending on vehicle complexity and whether the technician encounters rust or stuck bolts. Two struts take two to four hours total. Some shops can do the work same-day if you drop the car off in the morning; others may need to order parts or schedule you for the next available slot. Call ahead to ask about turnaround time.
Will replacing struts improve my gas mileage?
Worn struts increase rolling resistance and reduce suspension efficiency, so replacing them may improve fuel economy slightly—typically one to two miles per gallon. The improvement is modest and depends on how worn the old struts were. Better handling and braking performance are the main reasons to replace struts, not fuel savings.
Do I need an alignment after strut replacement?
A wheel alignment is not always required, but it is recommended. Strut replacement changes suspension geometry slightly, and an alignment ensures your wheels are positioned correctly for even tire wear and stable handling. Many shops include it in the strut job quote; others charge $100 to $200 separately. Ask your shop whether alignment is necessary for your vehicle.
What is the difference between a strut and a shock absorber?
A strut combines the shock absorber, spring, and steering knuckle into one assembly. A shock absorber is just the damping component. Most modern cars use struts in the front suspension; some use shocks in the rear. Struts are more compact and handle both spring and damping duties, while shocks work alongside separate springs. Replacement costs differ because struts are more complex assemblies.