Heidts is a manufacturer of independent front suspension kits, not a repair service or brand you choose at a shop
Heidts Auto Restoration makes bolt-on suspension components designed mainly for older cars—typically 1920s through 1970s vehicles—that either came with solid axles or need a complete suspension overhaul. Their kits replace the original front end with an independent double-A-arm setup that handles, stops, and rides better than what those cars left the factory with. You do not "get Heidts suspension" at a repair shop the way you get an alignment; you buy their kit and either install it yourself or pay a shop to do the work.
The appeal is straightforward: a 1955 Chevrolet or 1968 Dodge with original suspension rides like a truck, corners like it is on rails, and brakes with the stopping power of a bicycle. Heidts kits bolt to the frame, use modern geometry, and let you run modern wheels, tires, and brakes. For someone restoring a classic car or building a hot rod, this is the difference between a show piece that is painful to drive and something you can actually use on the road.
This is not a repair decision most people face. You encounter Heidts suspension only if you own an older vehicle, plan to modify it significantly, or are shopping for a pre-built classic car and need to understand what suspension it has.
Key Takeaways
- Heidts makes bolt-on independent suspension kits for older vehicles, not a service you receive at a shop.
- These kits replace solid axles or worn original suspension with modern double-A-arm geometry that improves handling, braking, and ride quality.
- Installation requires removing the original front suspension and bolting the new kit to the frame—a job that takes a skilled shop several days to a week.
- Heidts kits cost between roughly $2,000 and $5,000 depending on the vehicle year and whether you add power steering or other features, plus labor.
- You only need this if you own a classic or older vehicle and want to improve how it drives, not for routine maintenance on modern cars.
How Heidts suspension differs from what your old car came with
Most cars built before the 1980s used a solid front axle—a single beam that connected both front wheels and moved up and down as a unit. When one wheel hit a bump, the other wheel tilted, which made the car unstable in corners and harsh over rough roads. Braking was also poor because the axle geometry did not allow modern brake components to work well.
A Heidts kit replaces that solid axle with independent double-A-arm suspension, the same basic design used on modern cars. Each wheel is attached to two arms (the A-arms) that pivot at the frame, so each wheel can move up and down independently. This keeps the car level in corners, absorbs bumps more smoothly, and allows you to install modern disc brakes and power steering. The geometry also lets you run wider, modern tires that grip far better than what was available when the car was built.
The trade-off is that you lose the original look under the car and the authenticity of a stock restoration. For a driver who wants a classic car that actually handles like a modern car, that is a fair deal. For someone building a museum piece, it is not.
What the installation process involves
Installing a Heidts kit is not a weekend job. The shop has to remove the entire original front suspension—the axle, springs, shock absorbers, steering linkage, and brakes—then bolt the new kit to the frame using the mounting points Heidts designed for your specific vehicle. The kit comes with new control arms, coil springs, shocks, and steering components, but you usually keep your original frame and engine.
The work takes a skilled shop between three and seven days depending on the vehicle and how much rust or corrosion is in the frame. If the frame is bent or the mounting points are damaged, the job takes longer and costs more. Once the kit is installed, the car needs a full alignment and brake system work to make sure everything operates safely.
This is not something a general repair shop does routinely. You need a shop experienced with classic car restoration or suspension work. Many Heidts kits are installed by shops that specialize in hot rods and restorations, not by your local tire shop.
Cost and what affects the price
A Heidts suspension kit itself costs between roughly $2,000 and $5,000 depending on the vehicle year and which options you choose. A basic kit for a 1950s Chevy costs less than a kit for a 1960s Mopar with power steering and adjustable coil-overs. Labor to install it typically runs $1,500 to $3,000 or more, depending on the shop's rate and how much frame work is needed.
Additional costs can include new brake lines, a new master cylinder, modern disc brakes, power steering components, and an alignment. If you are also upgrading the engine or interior while the front end is apart, the total bill climbs quickly. A complete front-end restoration with a Heidts kit, new brakes, and power steering can easily reach $6,000 to $10,000 in parts and labor.
These are not routine maintenance costs. This is a capital investment in a vehicle you plan to keep and drive for years. Budget for it the same way you would budget for a new engine or transmission.
When a Heidts kit makes sense versus other options
If you own a classic car with original suspension that rides poorly and handles dangerously, you have three basic paths: restore the original suspension to like-new condition, upgrade to a modern aftermarket kit from another manufacturer, or install a Heidts kit.
Restoring the original suspension means rebuilding the original axle, springs, and shocks with modern materials and tighter tolerances. This keeps the car authentic and is cheaper than a new kit, but the result still rides and handles like an old car. It is the right choice if you are building a museum piece or a stock restoration.
Other manufacturers like RideTech, Fatman Fabrications, and Detroit Speed also make independent suspension kits for classic cars. Heidts is well-established and has kits for a wide range of vehicles, but it is not the only option. If you are shopping for a kit, compare what each manufacturer offers for your specific car, the warranty, and the reputation of shops in your area that install them.
A Heidts kit makes the most sense if you want to drive your classic car regularly, you value handling and safety over originality, and you have the budget for a quality installation by an experienced shop.
What to check if you are buying a car that already has a Heidts kit
If you are shopping for a used classic car and it already has a Heidts suspension installed, ask the seller for documentation: the original receipt, installation records, and any warranty paperwork. A reputable installation should come with records showing what was done and when.
Have a suspension specialist inspect the kit before you buy. Check that the mounting bolts are tight, the welds are sound, the shocks are not leaking, and the alignment is correct. A Heidts kit that was installed poorly or has not been maintained can be as dangerous as the original suspension it replaced.
Ask the seller how the car drives, whether there are any noises or vibrations, and whether the brakes feel responsive. A well-installed kit should feel like a modern car—smooth, stable, and predictable. If the car feels loose or unstable, that is a red flag.
Frequently Asked Questions
Can I install a Heidts kit myself if I have basic mechanical skills?
Not unless you have suspension experience and proper equipment. The kit requires precise alignment of the mounting points, welding in some cases, and careful brake system work. A mistake can make the car unsafe. Have a professional shop do the work.
Will a Heidts suspension void my car's originality if I am restoring it?
Yes. Concours-level restorations require original or correct-year components. A Heidts kit is visible underneath and will disqualify the car from judged shows that require stock specifications. It is the right choice for a driver's car, not a show car.
How long does a Heidts suspension last once it is installed?
The kit itself lasts as long as you maintain it—typically 10 to 15 years or more before shocks need replacement. The lifespan depends on how often you drive the car and the road conditions. Regular inspection and maintenance keep it safe.
What if my car is not listed in the Heidts catalog?
Heidts makes kits for many classic vehicles, but not all. Check their website or contact them directly with your vehicle year and model. If they do not make a kit for your car, other manufacturers may, or a custom fabricator can build a suspension for you.
Do I need to upgrade my brakes if I install a Heidts kit?
You should. The kit allows you to install modern disc brakes, which stop far better than the drum brakes most old cars came with. Many Heidts kits are sold with brake upgrades included or as an option. Modern brakes are safer and worth the cost.