A Grant GT steering wheel is an aftermarket replacement wheel designed for better grip, comfort, and control during driving
The Grant GT is a performance-oriented steering wheel made by Grant Products, a company that manufactures steering wheels and related controls for cars. It replaces your factory wheel with a smaller diameter (typically 13 to 14 inches), thicker grip, and often a horn pad that sits closer to your hands. The smaller size means less hand movement to turn the wheel, which matters most in tight parking or aggressive driving. The thicker rim reduces hand fatigue on long drives because your hands don't have to squeeze as hard to maintain grip.
Unlike your original wheel, a Grant GT is not a safety upgrade—it is a comfort and control choice. Your factory wheel already meets federal safety standards for airbag deployment and impact absorption. Switching to an aftermarket wheel means you are trading some of that engineered safety margin for a different driving feel. If your car has an airbag, installing a Grant GT requires disabling or removing that airbag, which is a real trade-off you should understand before you buy.
Key Takeaways
- A Grant GT wheel is smaller and thicker than a factory wheel, reducing hand movement and fatigue but requiring airbag removal if your car has one.
- Installation involves disconnecting the battery, removing the horn pad and fasteners, and transferring your horn switch and turn signal stalk to the new wheel.
- Grant GT wheels come in different materials—leather, vinyl, and suede—and different spoke designs, so you choose based on grip feel and appearance.
- Aftermarket wheels can make your steering feel more responsive, but they also remove the safety cushioning and impact protection of an airbag.
- Cost ranges widely depending on material and design, and you may need additional parts like a horn pad adapter or turn signal switch extension.
Why drivers choose a Grant GT over the factory wheel
The factory steering wheel on most cars is designed for comfort during normal highway driving and for safety in a crash. That means it is relatively large (15 to 16 inches in diameter), has a thin rim, and sits farther from your body. A Grant GT reduces that diameter to 13 or 14 inches, which means your hands spend less time moving to turn the wheel. In a parking lot or during tight cornering, this matters—you make the same turn with less arm rotation.
The thicker grip also changes how your hands feel the road. A thin factory wheel requires you to grip harder to prevent slipping, especially if your hands are wet or sweaty. A Grant GT's thicker rim spreads the pressure across a larger area of your palm, so you can hold it with less effort. Over a long drive, this reduces hand and forearm fatigue. The horn pad on a Grant GT also sits closer to your hands, so you do not have to reach as far to honk.
Some drivers also choose a Grant GT because it looks different from the factory wheel—it signals that the car has been modified for performance. Grant offers different spoke designs and materials, so you can match the wheel to your car's interior or your own taste. This is purely aesthetic and does not change how the wheel performs.
How to install a Grant GT steering wheel
Installation is a job you can do yourself if you are comfortable working with basic hand tools and electrical connectors, or you can have a shop do it in about an hour. The process is straightforward but requires care around the airbag system if your car has one.
Step 1: Disconnect the battery. Remove the negative terminal from your battery and wait at least 15 minutes. This discharges the airbag capacitor and prevents accidental deployment while you work.
Step 2: Remove the horn pad. On most cars, the horn pad is held by clips or screws underneath the wheel rim. Pry gently with a plastic trim tool to avoid scratching the wheel. Once the pad is loose, disconnect the horn wire from the back.
Step 3: Remove the steering wheel fastener. The wheel is held to the steering column shaft by a single large nut or bolt. Use a socket wrench to remove it. Mark the position of the wheel on the shaft with a marker or tape so you can reinstall it in the same position—this keeps your wheels straight.
Step 4: Disconnect the airbag (if present). If your car has an airbag, it is mounted behind the horn pad area. Locate the airbag connector (usually a yellow or orange plug) and disconnect it. Do not reinstall the airbag with the new wheel unless you have a Grant wheel designed to accept an airbag—most do not.
Step 5: Remove the turn signal and wiper stalks. These are held by clips or screws and slide out from the column. You will transfer them to the new wheel.
Step 6: Install the new wheel. Slide the Grant GT onto the shaft, align your reference mark, and tighten the fastener to the torque specification in your car's manual (usually 20 to 30 foot-pounds). Do not over-tighten.
Step 7: Reinstall the stalks and horn pad. Slide the turn signal and wiper stalks back into place. Connect the horn wire to the new horn pad and find it with clips or screws.
Step 8: Reconnect the battery. Reattach the negative terminal and start the car to confirm the horn and turn signals work.
Materials and design options for Grant GT wheels
Grant GT wheels come in three main materials, each with different grip and durability characteristics. Leather is the most common choice—it offers good grip in most conditions, looks professional, and ages well if maintained. Leather does absorb sweat and can become slippery when wet, so some drivers prefer it for cars that stay mostly dry. Vinyl is cheaper and more durable in wet conditions, but it can feel less premium and may crack in extreme heat. Suede offers the best grip, especially for performance driving, but it wears faster and requires more cleaning.
Grant also offers different spoke designs—three-spoke, four-spoke, and multi-spoke wheels. Three-spoke is the classic performance look and keeps your hands visible on the wheel. Four-spoke and multi-spoke designs look more modern and can hide hand position, which some drivers prefer for appearance. None of these design choices affects how the wheel performs; it is purely visual.
Wheel diameter also varies. A 13-inch wheel is the smallest and requires the most hand movement reduction; a 14-inch wheel is more moderate. Smaller wheels can feel twitchy on the highway if you are not used to them, so if you drive mostly at highway speeds, a 14-inch might feel more natural than a 13-inch.
The safety trade-off: airbags and steering wheel protection
Your factory steering wheel is engineered to work with your car's airbag system. The airbag is mounted behind the horn pad and deploys forward in a frontal crash, inflating between you and the wheel to absorb impact energy and slow your forward motion. When you remove the factory wheel and install a Grant GT, you are removing that airbag protection unless the Grant wheel is specifically designed to accept an airbag.
Most Grant GT wheels are not airbag-compatible. This means you have two choices: disable the airbag system (which requires a shop to reprogram the car's computer or physically disconnect the airbag), or leave the airbag connected and accept that it will deploy into the back of your new wheel if you crash. Deploying into the back of an aftermarket wheel can cause the wheel to break or splinter, which could injure your hands or face.
The factory wheel also has a thicker, more energy-absorbing rim designed to deform in a crash and reduce the force transmitted to your hands and arms. A Grant GT rim is thinner and stiffer, so it does not absorb impact as well. In a crash, this means more force reaches your hands and wrists. This is not a reason to avoid a Grant GT—many drivers use them safely—but it is a real difference you should know about before you install one.
Compatibility with your car's steering column
Grant GT wheels fit most cars with a standard steering column shaft, but you need to confirm your car's shaft diameter and spline pattern before you buy. Most cars use either a 3.5-inch or 3.75-inch diameter shaft with a specific number of splines (usually 6 or 9). Grant publishes a compatibility chart on their website and through retailers, so check your car's year, make, and model before ordering.
Some cars also have a turn signal stalk or wiper stalk that is integrated into the steering column in a way that does not transfer easily to an aftermarket wheel. If your car has electronic turn signals or wipers controlled by buttons on the wheel itself, you may not be able to use a Grant GT without losing that functionality. A shop can advise you on this before you buy.
If your car has power steering, the Grant GT wheel works the same way as the factory wheel—the smaller diameter actually makes power steering feel slightly more responsive because you have more mechanical advantage. This is a minor benefit, not a major one.
Cost and additional parts you might need
A Grant GT steering wheel typically costs between $80 and $250 depending on material, diameter, and design. Leather wheels are more expensive than vinyl; smaller diameters are usually more expensive than larger ones. If you are having a shop install it, labor usually runs $75 to $150 depending on whether your car has an airbag and how complex the stalk transfer is.
You may also need additional parts. If your car's turn signal or wiper stalk does not fit the new wheel's column opening, you may need an adapter or extension piece (usually $20 to $50). If you want to disable the airbag system, a shop will charge $50 to $200 depending on whether they reprogram the computer or physically disconnect the system. Some cars also require a horn pad adapter if the new wheel's horn pad does not match your car's horn contact points ($15 to $40).
Frequently Asked Questions
Will a Grant GT wheel fit my car?
Grant GT wheels fit most cars with a standard steering column, but you need to check the shaft diameter and spline pattern for your specific year, make, and model. Grant publishes a compatibility chart online and through retailers. If your car has electronic turn signals or wipers integrated into the wheel, you may not be able to use a Grant GT without losing that functionality.
Can I keep my airbag if I install a Grant GT?
Most Grant GT wheels are not designed to work with airbags. If you keep the airbag connected, it will deploy into the back of the new wheel in a crash, which can cause the wheel to break and injure your hands. You can disable the airbag through a shop, but this removes an important safety feature. Some Grant wheels are airbag-compatible, so check before you buy if this matters to you.
How do I know if I need a horn pad adapter?
The Grant GT wheel comes with a horn pad, but it may not match your car's horn contact points on the steering column. A shop can test this during installation. If the horn does not work, they can install an adapter piece that costs $15 to $40 and takes a few minutes to fit.
Is a Grant GT wheel harder to turn than my factory wheel?
No. The smaller diameter actually makes the wheel easier to turn because you have more mechanical advantage. The thicker grip may feel different at first, but it does not increase the effort needed to steer. Power steering works the same way with a Grant GT as it does with a factory wheel.
Can I install a Grant GT wheel myself?
Yes, if you are comfortable with basic hand tools and electrical connectors. The main steps are disconnecting the battery, removing the horn pad, unbolting the old wheel, transferring the turn signal and wiper stalks, and installing the new wheel. The hardest part is usually disconnecting the airbag safely if your car has one. If you are unsure, a shop can do it in about an hour for $75 to $150.