A Full Throttle lift raises your truck or SUV by replacing the factory suspension with a complete aftermarket system

Full Throttle is a brand that makes complete suspension kits designed to lift a vehicle higher than stock while maintaining or improving ride quality. Unlike a straightforward spacer or coil-over swap, a Full Throttle system replaces multiple suspension components at once — typically upper and lower control arms, new coil springs or air springs, shocks, and sometimes sway bars. The goal is to gain ground clearance for larger tires while keeping the suspension geometry correct so the vehicle still handles predictably.

The lift height varies by kit and vehicle. Full Throttle makes systems ranging from 2 inches to 6 inches or more, depending on what your truck or SUV can accommodate. A higher lift means more tire clearance and a more aggressive stance, but it also changes how your vehicle sits on the road, affects fuel economy, and can alter steering feel and braking performance if not done carefully.

Key Takeaways

  • Full Throttle suspension kits replace multiple components at once rather than modifying existing parts, which maintains suspension geometry better than partial upgrades.
  • Lift height ranges from 2 to 6 inches depending on the kit and vehicle, with taller lifts requiring more extensive modifications and costing significantly more.
  • Installation typically requires professional alignment and may need modifications to brake lines, driveshaft angles, or transfer case skid plates depending on lift height.
  • A Full Throttle lift will change your vehicle's fuel economy, steering response, and braking characteristics, and may void certain factory warranties.
  • Cost varies widely by vehicle and lift height, but a complete installation including labor typically runs between $2,000 and $8,000 or more.

How a Full Throttle kit differs from other lift methods

The suspension industry offers several ways to lift a vehicle. A spacer lift uses rubber or metal shims placed on top of the coil springs to push the vehicle up — it is cheap and quick but does not address suspension geometry. A coil-over conversion replaces springs and shocks with adjustable coil-over units, giving you height and some tuning ability but leaving the control arms and other geometry unchanged. A Full Throttle system redesigns the entire suspension by replacing control arms, springs, shocks, and often sway bars as a matched set.

The advantage of the matched-set approach is that all the angles — the camber, caster, and toe of your wheels — are engineered to work together at the new ride height. With a spacer or partial coil-over, you often end up with poor wheel angles that cause uneven tire wear, wandering steering, or a harsh ride. A Full Throttle kit is more expensive upfront but typically requires less ongoing adjustment and causes fewer handling problems.

What components a Full Throttle suspension kit includes

A typical Full Throttle kit for a truck includes new upper and lower control arms (sometimes called A-arms), new coil springs tuned for the lifted height, new shocks or struts, and often a new front sway bar or sway bar links. Some kits also include a rear sway bar, track bar, or panhard rod — parts that control side-to-side movement and keep the axle centered under the vehicle. The exact contents depend on the vehicle platform and lift height.

You will also need new brake lines if the lift is tall enough that the factory lines no longer reach, and possibly a new driveshaft or driveshaft yoke if the angle between the transmission and rear axle becomes too steep. A professional installer will assess these needs during the quote phase. Do not assume the kit price includes every part you will need — ask the installer for a complete parts list and labor estimate before committing.

Installation and what happens to your alignment

Installing a Full Throttle kit is not a backyard job. The suspension must be removed, new components installed, and then the vehicle must be aligned to factory or near-factory specifications. A poor alignment after a lift causes tire wear, steering problems, and can make the vehicle unsafe on the highway. Most professional shops charge between $800 and $2,000 in labor alone, depending on lift height and vehicle complexity.

After installation, your alignment angles will be different from stock. A good shop will set the camber, caster, and toe to the closest acceptable range for your lifted height — this is not always the factory spec, because the factory spec assumes a stock suspension. Ask the shop what alignment numbers they are targeting and whether they will provide a printout showing before and after. Some shops also perform a test drive and make fine adjustments to steering feel or ride height based on how the vehicle behaves.

How a lift changes your vehicle's performance and economy

A Full Throttle lift raises your center of gravity, which means your vehicle will lean more in corners and may feel less stable during hard turns compared to stock. The taller you lift, the more pronounced this effect becomes. A 2-inch lift is barely noticeable; a 6-inch lift will feel noticeably different, especially if you are used to the stock handling.

Fuel economy typically drops 1 to 3 miles per gallon after a lift, depending on lift height and whether you add larger tires. Larger tires increase rolling resistance and weight, which compounds the loss. Braking distance may increase slightly because the vehicle is heavier and the weight distribution has changed. If you tow, a lift can affect how your trailer pulls — some lifts improve towing stability by raising the hitch point, while others make it worse if not done correctly.

Steering feel often becomes lighter and less responsive after a lift because the steering geometry has changed. Some drivers prefer this; others find it vague. A quality Full Throttle kit and proper alignment minimize these effects, but they do not eliminate them entirely.

Cost breakdown for a Full Throttle suspension lift

The cost of a Full Throttle lift depends on three things: the vehicle, the lift height, and whether you do the work yourself or hire a shop. A 2-inch kit for a common truck might cost $1,200 to $2,000 for parts alone. A 4-inch kit for the same truck could run $2,500 to $4,000. A 6-inch kit or a kit for a less common vehicle can exceed $5,000 in parts.

Labor adds significantly. A 2-inch lift typically takes 8 to 12 hours of shop time. A 4-inch or taller lift can take 16 to 24 hours or more if modifications to brake lines, driveshaft, or other components are needed. At typical shop rates of $100 to $150 per hour, labor alone can run $800 to $3,600. Alignment is usually billed separately and costs $150 to $300. A complete installation from start to finish — parts, labor, alignment, and any necessary modifications — typically ranges from $2,000 to $8,000 or more.

Some shops offer financing options or payment plans, but read the terms carefully. Do not finance a suspension lift over more than 12 to 24 months unless you plan to keep the vehicle that long.

Warranty and long-term maintenance after a lift

Installing a Full Throttle suspension lift will void the factory suspension warranty on your vehicle. Some manufacturers also void the powertrain warranty if they determine the lift caused damage — for example, if a driveshaft fails because the angle became too steep. Check your vehicle's warranty documentation or call the manufacturer before lifting to understand what you are giving up.

After installation, your suspension will require more frequent maintenance than stock. Bushings, ball joints, and tie rod ends wear faster because they are working at different angles. Shocks typically last 40,000 to 60,000 miles on a lifted vehicle, compared to 50,000 to 80,000 on stock suspension. Tire rotation should happen every 5,000 to 7,000 miles to manage uneven wear. Budget for these costs when deciding whether a lift makes sense for your situation.

Frequently Asked Questions

Can I install a Full Throttle lift myself?

You can if you have a lift, jack stands, and suspension experience, but most people should not. Suspension work affects your vehicle's safety — a mistake in installation or alignment can cause steering failure or loss of control. Professional installation is worth the cost.

Will a Full Throttle lift fit my vehicle?

Full Throttle makes kits for common trucks and SUVs, but not every model. Check the Full Throttle website or contact a local suspension shop to confirm a kit exists for your specific year, make, and model. Some vehicles have limited lift options due to frame or suspension geometry constraints.

How much bigger can my tires be after a lift?

A 2-inch lift typically allows tires one size larger. A 4-inch lift allows two sizes larger. A 6-inch lift allows three sizes larger. Larger tires cost more, reduce fuel economy further, and can affect speedometer accuracy. Have the installer confirm tire size before you buy them.

Does a Full Throttle lift improve off-road capability?

Yes, if you pair it with larger tires and skid plates. The extra ground clearance helps you clear obstacles, and larger tires provide better traction in soft terrain. However, a lift alone does not make a vehicle off-road ready — you also need proper tires, recovery equipment, and driving skill.

What happens if I sell my vehicle after lifting it?

A lifted vehicle appeals to some buyers but not others. The resale value may be higher or lower depending on the local market, the quality of the work, and the buyer's preferences. Disclose the lift and any warranty voids to potential buyers. Some buyers will pay a premium; others will negotiate down because of the warranty loss and maintenance costs.