FTS suspension lift kits raise your vehicle's frame and suspension to increase ground clearance and ride height
FTS (Full Traction System) lift kits are aftermarket suspension components that physically lift your truck or SUV higher off the ground. They work by replacing or extending your existing suspension springs, shocks, and related parts with longer versions. The result is more space between your chassis and the road — typically 2 to 6 inches depending on the kit you choose.
The main reason people install lift kits is to fit larger tires. A stock vehicle has only so much room in the wheel well; a lifted suspension creates that room. Beyond tires, lift kits also improve approach and departure angles — the ability to climb over obstacles without scraping the front or rear bumper — which matters if you drive on rough terrain or unpaved roads.
FTS kits come in different types: coil spring lifts, leaf spring lifts, and spacer lifts. Each one works differently and affects how your vehicle handles, rides, and wears its parts. Understanding which type you have or are considering matters because the consequences for your truck's longevity and safety are real.
Key Takeaways
- FTS lift kits raise your vehicle by replacing springs and shocks with longer components, creating more ground clearance and room for larger tires.
- Lifting changes how your suspension angles work, which can accelerate wear on CV joints, U-joints, and driveline components if not properly installed or maintained.
- Lifted vehicles sit higher, which raises your center of gravity and changes how the truck handles in turns and emergency maneuvers — a real safety factor.
- Lift kits affect your speedometer accuracy, brake performance, and steering geometry, so professional installation and a wheel alignment afterward are not optional.
- Warranty coverage on your vehicle's drivetrain and suspension often becomes void after a lift kit installation, depending on your manufacturer and dealer.
How FTS lift kits change your suspension geometry
When you lift a vehicle, you are not just moving it up — you are changing the angles at which your suspension components connect to each other and to the wheels. Your factory suspension was engineered with specific angles for the stock ride height. Lift it, and those angles change.
The most important angle is driveline angle. Your driveshaft connects the transmission to the rear differential at a specific slope. Lift the rear suspension without adjusting the driveshaft, and that slope becomes steeper. A steep driveline angle causes vibration, accelerates wear on U-joints (the flexible couplings in your driveshaft), and can eventually cause the driveshaft to fail. This is why quality lift kits include a driveshaft spacer or require a driveshaft shortening — to keep that angle within safe limits.
The same principle applies to front-wheel-drive vehicles and their CV joints (constant velocity joints). Lift the front suspension too much without addressing CV joint angles, and you accelerate wear on those joints, leading to clicking sounds and eventual failure.
A professional installation includes a four-wheel alignment afterward. This resets your camber, caster, and toe angles — the directions your wheels point relative to the chassis. Without this alignment, your tires wear unevenly and your vehicle pulls to one side.
Different FTS lift kit types and what they do differently
FTS offers several lift kit designs, and the type you choose affects cost, ride quality, and maintenance needs.
Coil spring lifts replace your factory coil springs with longer, stiffer springs. They are common on trucks with independent front suspension. Coil lifts tend to provide a smoother ride than some alternatives because springs can flex and absorb bumps. The downside is cost — quality coil kits run several hundred dollars — and they can reduce your vehicle's load capacity if the springs are not rated for the weight you plan to carry.
Leaf spring lifts work on vehicles with leaf spring suspension (common on truck rear ends and some older SUVs). These kits add extra leaves to your existing spring pack or replace the springs entirely with longer ones. Leaf lifts are generally cheaper than coil lifts but provide a stiffer, less comfortable ride. They also handle heavy loads better, which is why they are popular on work trucks.
Spacer lifts (also called suspension spacers or leveling kits) sit on top of your existing springs and push the suspension up without replacing the springs themselves. These are the cheapest option and work well if you only need 1 to 2 inches of lift. Beyond that, spacers can compress your springs too much, reducing their ability to absorb bumps and making the ride harsh.
How lift kits affect handling, braking, and safety
Lifting your vehicle raises its center of gravity — the point around which it balances. A higher center of gravity makes your truck more likely to roll in sharp turns or emergency maneuvers. This is not theoretical: lifted vehicles have higher rollover rates in accident data, particularly in sharp turns at highway speeds.
Braking also changes. Your lifted truck now has a longer distance from the brake pads to the ground, and the weight distribution shifts when you brake hard. Some lift kits can reduce braking effectiveness slightly, especially if the installation affects brake line routing or suspension geometry in ways that change how the brakes distribute force between front and rear wheels.
Your speedometer becomes inaccurate when you fit larger tires (which most people do after lifting). A speedometer reads wheel rotation speed and calculates your speed based on the tire size programmed into your vehicle's computer. Larger tires rotate more slowly at the same speed, so your speedometer reads lower than your actual speed. You might think you are going 55 mph when you are actually going 60 mph. This affects your ability to judge safe following distance and can result in speeding tickets.
Steering geometry also changes. Your steering angle — how much your wheels can turn left and right — may be reduced after a lift, depending on the kit and your tire size. This is why some lifted trucks have a wider turning radius than stock vehicles.
Maintenance and wear patterns after a lift kit installation
A properly installed lift kit does not require constant maintenance beyond what you would do on a stock vehicle. However, you will see accelerated wear on certain parts if the installation was not done correctly or if you do not maintain proper alignment.
Tire wear becomes uneven more quickly on lifted vehicles, especially if the alignment is off. Check your tire pressure monthly and have your alignment checked every 10,000 to 15,000 miles for the first year after installation. After that, annual checks are usually sufficient.
Driveline components — U-joints, CV joints, and the driveshaft itself — wear faster on lifted vehicles because of the changed angles. Listen for clicking or clunking sounds from under the vehicle, especially when turning or accelerating. These are signs that joints are wearing out and need replacement.
Shock absorbers (dampers) work harder on lifted vehicles because the suspension has more travel. They may wear out sooner than on a stock vehicle. If your ride becomes bouncy or your vehicle sways excessively in turns, your shocks may need replacement.
Warranty and insurance implications of lift kit installation
Most vehicle manufacturers void warranty coverage on suspension and drivetrain components once you install an aftermarket lift kit. This is because the lift changes how those components work and can accelerate wear. Your dealer can refuse to cover a failed driveshaft, U-joint, or transmission if they determine the lift kit contributed to the failure.
Some manufacturers are more lenient than others. Toyota, for example, has specific guidelines about lift height and approved kits. Ford and Chevrolet policies vary by model year and dealer. Before you install a lift kit, contact your dealer and ask in writing what warranty coverage you will lose. Keep that documentation.
Insurance coverage is usually not affected by a lift kit alone, but some insurers charge slightly higher premiums for lifted vehicles because of the increased rollover risk. Call your insurance agent before installation and ask whether your policy will change. Some insurers require you to report the modification; failing to do so can give them grounds to deny a claim.
Professional installation versus DIY
FTS lift kits can be installed by a may have access to suspension shop or, in some cases, by someone with mechanical skill and the right tools. The difference matters.
A professional shop will have a lift alignment rack, which allows them to set suspension angles correctly before and after installation. They will also know the specific requirements for your vehicle — whether you need a driveshaft spacer, how much preload to set on your springs, and what torque specifications to use on bolts. They will perform a four-wheel alignment as part of the job.
DIY installation is cheaper but carries real risk. If driveline angles are not set correctly, you will damage your driveshaft and U-joints. If the alignment is not done, your tires will wear out in months. If bolts are not torqued to specification, suspension components can loosen and fail while you are driving. The cost of a professional installation — typically $800 to $2,000 depending on kit type and vehicle — is usually worth it compared to the cost of replacing a driveshaft, transmission, or repairing an accident caused by poor handling.
Frequently Asked Questions
Will a lift kit damage my vehicle's transmission or engine?
Not directly, but it can accelerate wear on the driveshaft and U-joints, which can eventually cause vibration that stresses the transmission. A properly installed kit with correct driveline angles will not damage these components. A poorly installed kit can.
How much does an FTS lift kit cost to install?
Kit cost varies from $300 to $1,500 depending on type and quality. Professional installation typically adds $800 to $2,000. Budget for a four-wheel alignment ($150 to $300) and possibly a driveshaft modification ($200 to $500) as well.
Can I install a lift kit myself if I have basic mechanical skills?
You can attempt it, but professional installation is strongly recommended. The alignment and driveline angle setup require specialized equipment and knowledge. Mistakes can result in unsafe handling, accelerated wear, or component failure.
Does a lift kit affect my vehicle's fuel economy?
Yes, typically by 1 to 3 miles per gallon. The raised center of gravity and larger tires (which most people install after lifting) increase rolling resistance and aerodynamic drag. The effect is small but noticeable over time.
What is the difference between a lift kit and a leveling kit?
A leveling kit raises only the front suspension to match the rear, creating a level stance. A lift kit raises the entire vehicle. Leveling kits are cheaper and simpler but provide less ground clearance and tire room than a full lift.