Fabtech lift kits raise your truck or SUV's frame and suspension to gain ground clearance and accommodate larger tires
Fabtech manufactures bolt-on suspension lift kits that increase the ride height of trucks and SUVs by 2 to 6 inches, depending on the kit. The kits use coil springs, leaf springs, or a combination of both—paired with new shocks—to lift the frame while keeping the suspension geometry functional. Fabtech kits are sold as complete systems, meaning you get all the components needed for installation in one box, rather than mixing parts from different makers.
The main reason to install a lift kit is to fit larger tires without the tires rubbing against the frame or suspension during turns and compression. A secondary benefit is increased departure and approach angles, which matters if you drive on rough terrain. Fabtech kits are mid-range in price and reputation: they cost less than brands like Fox or King, but more than basic budget kits, and they are commonly installed by independent shops and dealerships across the country.
Key Takeaways
- Fabtech kits come as complete systems with springs, shocks, and hardware, so you do not have to source parts separately.
- Lift height ranges from 2 to 6 inches depending on the model and kit level, and taller lifts usually cost more and affect ride quality more noticeably.
- Installation typically costs $800 to $2,000 in labor, on top of the kit price, and requires a shop with suspension experience.
- Fabtech kits are designed for specific truck and SUV models, so you must match the kit to your vehicle's year, engine, and wheelbase.
- A lift kit will void or complicate your vehicle's factory warranty and may affect insurance coverage and resale value depending on how the truck is used.
How Fabtech kits differ from other suspension brands
Fabtech competes in the middle tier of the lift kit market. Brands like Fox Racing Shocks and King Shocks offer higher-end kits with more adjustability and better performance on extreme terrain, but they cost significantly more—often $3,000 to $6,000 before labor. Budget brands like ReadyLIFT or Rough Country cost less upfront but use simpler designs and lower-cost shocks that wear faster and provide less control.
Fabtech's position means their kits are engineered for durability and reasonable off-road performance without the premium price tag. They use monotube shocks (a single-chamber design that resists heat buildup) on most kits, which is better than twin-tube shocks found on cheaper kits but not as advanced as the remote-reservoir shocks on high-end brands. For a truck owner who lifts for appearance and occasional light off-roading—not rock crawling or desert racing—Fabtech is a practical middle ground.
One practical difference: Fabtech kits are widely available through online retailers and local shops, so parts and warranty support are easier to find than with smaller or newer brands. If a shock fails or you need a replacement spring, you can usually order from stock rather than waiting for a special order.
Lift height options and what each one costs
Fabtech offers kits in 2-inch, 4-inch, and 6-inch lift heights for most popular trucks. A 2-inch lift is the entry point: it costs the least, affects ride quality the least, and lets you fit tires about one size larger than stock. A 4-inch lift is the most common choice, offering a noticeable appearance change and room for tires 2 to 3 sizes larger. A 6-inch lift is the most aggressive and is usually chosen for maximum tire clearance or to match a specific visual style.
Price varies by lift height and vehicle model. A 2-inch Fabtech kit typically costs $600 to $1,000. A 4-inch kit runs $1,200 to $2,000. A 6-inch kit ranges from $2,000 to $3,500. These are kit-only prices; labor to install adds $800 to $2,000 depending on your location and the shop's experience with Fabtech systems. Some shops charge by the hour (typically $100 to $150 per hour, with installation taking 8 to 16 hours), while others quote a flat rate for the specific kit and vehicle.
Taller lifts also carry hidden costs. A 6-inch lift may require a driveshaft modification or replacement ($300 to $800), extended brake lines ($100 to $300), and a front-end alignment ($150 to $300). Budget these extras when comparing total cost.
What happens to your truck's warranty and insurance
Installing a lift kit will void the suspension and steering components of your factory warranty. The manufacturer can argue that the lift caused any failure in those systems, and they will not cover repairs. Some dealers will still honor warranty work on unrelated systems (engine, transmission, electronics) if the lift is clearly not the cause, but this varies by dealer and situation. Check with your dealer before installation if warranty coverage matters to you.
Insurance coverage usually remains in place, but inform your insurer about the lift. Some insurers charge a small premium increase (typically $20 to $50 per year) because a lifted truck is statistically more likely to roll in a crash. A few insurers will not cover lifted vehicles at all, so call your agent before you commit to the purchase. Do not assume the lift is covered under your current policy.
Resale value is mixed. A well-maintained lifted truck appeals to buyers in truck-focused markets, but it narrows your buyer pool and may reduce value in areas where lifted trucks are less common. If you plan to sell within a few years, a lift kit is a less recoverable expense than maintenance or mechanical upgrades.
Installation: what to expect and where to get it done
Fabtech kits are designed for bolt-on installation, meaning you do not need to weld or permanently modify the frame. However, "bolt-on" does not mean straightforward. The job requires removing the wheels, disconnecting the existing suspension, and installing new springs, shocks, and hardware in a specific sequence. Most independent suspension shops and many truck-focused dealerships can handle Fabtech kits. Some Fabtech retailers offer installation services or can recommend local shops.
Before you book installation, confirm that the shop has experience with your specific truck model and the lift height you chose. A shop that has installed dozens of 4-inch kits on Ford F-150s will work faster and more reliably than one doing their first 6-inch lift on a Chevy Silverado. Ask for references or photos of previous work.
Installation typically takes one to two days. Some shops will keep your truck overnight; others can finish in a single day if they start early. After installation, you will need a wheel alignment (required) and possibly a driveshaft balance check (recommended for 4-inch lifts and above). Do not drive the truck hard for the first 100 miles while the suspension settles.
Matching the kit to your specific truck or SUV
Fabtech kits are model-specific. A kit for a 2019 Ford F-150 SuperCrew will not fit a 2019 Ford F-150 SuperCab, and neither will fit a 2020 F-150. The differences in wheelbase, frame geometry, and suspension mounting points matter. When shopping, you will need your vehicle's year, make, model, cab style (if applicable), and wheelbase. You can find the wheelbase on your registration or by measuring the distance from the center of the front wheel to the center of the rear wheel.
Some Fabtech kits are available for trucks and SUVs from Ford, Chevrolet, GMC, Dodge, Toyota, and Nissan. Fabtech does not make kits for every model, so check their website or a retailer's catalog to confirm your vehicle is supported. If your truck is not listed, you will need to look at other brands or consider a different suspension upgrade.
Engine size sometimes matters too. A truck with a diesel engine may have a different suspension setup than the same model with a gasoline engine, and the kit must match. Confirm this detail when ordering.
Ride quality and handling after a lift
A lift kit changes how your truck feels on the road. The higher center of gravity makes the truck more prone to body roll in corners, and the softer springs required to maintain a comfortable ride (compared to stock) mean more bouncing over bumps. A 2-inch lift is barely noticeable in daily driving. A 4-inch lift is noticeable but manageable for most drivers. A 6-inch lift requires adjustment: the truck will sway more in turns, and highway driving feels less stable than a stock truck.
Fabtech kits use tuned shocks designed to work with the lift springs, so the ride is better controlled than a cheap kit with mismatched components. Still, a lifted truck will never ride as smoothly as a stock truck on pavement. If you spend most of your time on highways, a smaller lift (2 to 4 inches) is a better choice than a 6-inch kit.
Off-road performance improves with a lift because the increased suspension travel and ground clearance let you navigate rougher terrain without high-centering the frame. Fabtech kits are adequate for light to moderate off-roading (forest roads, mild trails), but they are not designed for extreme rock crawling or high-speed desert racing, where you would want a premium brand.
Tire size and wheel fitment after lifting
The main reason to lift is to fit larger tires. A stock truck usually has 2 to 3 inches of clearance between the tire and the frame at full suspension compression. A 2-inch lift adds about 2 inches of clearance, letting you go up one tire size (for example, from 265/75R16 to 285/75R16). A 4-inch lift typically allows a jump of two tire sizes. A 6-inch lift can accommodate three sizes larger, though you may hit the fender at full turn in some cases.
Larger tires cost more to buy and replace, wear faster, reduce fuel economy, and affect speedometer accuracy. A tire that is one size larger than stock will read slightly slower on your speedometer (the difference is usually under 2 mph at highway speeds). Larger tires also require more engine power to accelerate, so you may notice slower 0-to-60 times.
Wheel fitment is separate from tire size. Lifted trucks often use wheels with different offsets (how far the wheel sits from the hub) to clear the suspension components and maintain proper geometry. Fabtech kits do not include wheels, so you will need to buy them separately. A shop can advise on offset and width based on your lift height and tire choice.
Frequently Asked Questions
Will a Fabtech lift kit damage my truck's frame?
No, if installed correctly. Fabtech kits bolt to existing frame and suspension mounting points without cutting or welding. However, improper installation or driving aggressively on rough terrain can stress the frame and welds over time. Use a reputable shop and avoid extreme off-roading if you want the truck to last.
Can I install a Fabtech kit myself?
Technically yes, but it is not recommended unless you have suspension experience and proper tools. The job requires removing and reinstalling critical safety components, and mistakes can affect handling and stability. Most owners hire a shop, which costs $800 to $2,000 in labor but ensures the work is done correctly.
How long does a Fabtech lift kit last?
The springs typically last the life of the truck if not abused. The shocks usually need replacement every 50,000 to 80,000 miles, similar to stock shocks. Fabtech shocks are available as replacements, and you can buy them individually rather than replacing the entire kit.
Will a lift kit affect my truck's fuel economy?
Yes, noticeably. A lifted truck with larger tires will use 1 to 3 more gallons per 100 miles than a stock truck, depending on lift height, tire size, and driving habits. The higher center of gravity and increased rolling resistance of larger tires are the main causes. This cost compounds over time, so factor it into your decision.
Can I remove a Fabtech lift kit later?
Yes, but it is expensive. Removal requires the same labor as installation, and you will need to reinstall stock suspension components or sell the truck with the lift. Most owners keep the lift for the life of the truck rather than removing it.