Sway bar replacement costs between $150 and $900 per side, depending on your vehicle and which shop does the work

A sway bar (also called an anti-roll bar) is a metal rod that connects your suspension on one side of the car to the other side, reducing body roll when you turn. When it wears out or breaks, the car leans harder into corners and feels less stable. Replacing one costs labor plus parts, and both vary widely by vehicle make and model.

The total bill usually breaks down into two parts: the sway bar itself ($50 to $300 per side) and labor to remove and install it ($100 to $600 per side). A sedan at an independent shop might run $300 to $500 total. A truck or luxury vehicle at a dealership can easily exceed $800 to $1,200. Some vehicles have sway bars on both the front and rear suspension, which doubles the cost if both need replacement.

Key Takeaways

  • Parts cost $50 to $300 per side; labor adds $100 to $600 per side depending on vehicle complexity and shop hourly rate.
  • Independent repair shops typically charge 30 to 50 percent less than dealerships for the same work.
  • Trucks, SUVs, and luxury vehicles often cost more because the sway bar is harder to access or the part itself is more expensive.
  • A broken sway bar is unsafe to drive on for extended distances; have it inspected and repaired within a few days if you suspect damage.

What the parts themselves cost

The sway bar rod is the main expense. For a typical sedan, an OEM (original equipment manufacturer) part runs $80 to $200. Aftermarket bars from brands like Moog, Dorman, or TRW cost $50 to $150 and are usually just as reliable. Luxury vehicles and trucks pay more: a BMW or Mercedes sway bar can be $250 to $400, and a heavy-duty truck bar may exceed $300.

You may also need new sway bar links (the connectors that attach the bar to the suspension) if they are worn or damaged. Links cost $20 to $80 each, and most cars need two per side. Bushings—rubber sleeves that hold the bar in place—run $10 to $40 per pair and are often replaced at the same time since they wear together.

Labor costs vary by shop type and vehicle

Independent repair shops typically charge $80 to $150 per hour for labor. A sway bar replacement usually takes 1 to 3 hours per side, depending on how accessible the bar is. On a Honda Civic, it might be 1.5 hours. On a Jeep Wrangler or truck with more complex suspension, it can stretch to 3 hours or more.

Dealerships charge $120 to $200 per hour and often have longer wait times. The labor time estimate is the same, but the hourly rate is higher. Some dealerships also charge a diagnostic fee ($50 to $150) before they give you a repair quote, though this is sometimes waived if you proceed with the work.

When you need one side versus both

Most cars have a sway bar on the front suspension only. Some trucks, SUVs, and performance vehicles also have a rear sway bar. If only the front is broken, you replace only the front—usually one side at a time, though some shops recommend replacing both sides together if one is worn.

If your car has both front and rear sway bars and both need work, the total cost roughly doubles. A front-and-rear replacement on a truck might run $1,200 to $1,800 at an independent shop, or $1,600 to $2,400 at a dealership. Ask the mechanic whether both sides of the same bar need replacement or just one.

OEM parts versus aftermarket

OEM parts come directly from the car manufacturer and fit perfectly, but they cost 20 to 40 percent more than aftermarket equivalents. Aftermarket parts from established brands like Moog, Dorman, or TRW meet the same safety standards and carry warranties. For most drivers, aftermarket is the better value.

Avoid the cheapest no-name parts on online marketplaces. A sway bar that fails mid-turn can cause loss of control. Stick with brands that have been in the suspension business for decades and offer a warranty of at least one year. Your mechanic can recommend which aftermarket brands they trust.

Getting a quote before you commit

Call three shops—one dealership and two independent shops—and ask for a written estimate. Provide your vehicle's year, make, model, and mileage. Tell them which side is damaged or worn, and ask whether they recommend replacing both sides or just one. A good estimate includes the part cost, labor hours, and any additional items like links or bushings.

Compare not just price but warranty. Most independent shops offer a 12-month, 12,000-mile warranty on parts and labor. Dealerships typically offer longer coverage. If a shop quotes significantly lower than others, ask why—it may be using a cheaper part or underestimating labor time.

Signs your sway bar needs replacement

A worn sway bar causes the car to lean excessively when turning, especially at highway speeds. You may hear a clunking noise from the suspension when going over bumps or turning sharply. The steering may feel less responsive, or the car may feel unstable on curves. If the bar is completely broken, you might see it hanging loose under the car.

Have a mechanic inspect it if you notice any of these signs. A broken sway bar is not an when ready emergency if you drive slowly and carefully, but it reduces your control in emergency maneuvers and makes the car unsafe at highway speeds. Schedule the repair within a few days rather than weeks.

Frequently Asked Questions

Can I drive with a broken sway bar?

You can drive slowly to a repair shop, but extended highway driving is unsafe. A broken sway bar reduces your control in turns and emergency maneuvers. Have it inspected and repaired within a few days.

Why do some shops want to replace both sides at once?

If one side is worn, the other is usually wearing too. Replacing both ensures balanced handling and prevents a return visit in a few months. Ask the mechanic to explain why both are needed in your case.

Is a sway bar replacement covered by warranty?

Most factory warranties cover sway bars for three years or 36,000 miles. If your car is newer and still under warranty, contact the dealership before paying out of pocket. Extended warranties vary by provider.

What's the difference between a sway bar and a strut?

A sway bar reduces body roll in turns. A strut is a shock absorber combined with a spring that supports the car's weight. They are separate parts and cost differently to replace.

Should I replace sway bar links at the same time?

If the links are worn or damaged, yes—they wear together with the bar and cost only $20 to $80 each. Replacing them now prevents a second repair visit in a few months.